Water technology for specific water usage

BACKGROUND: Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. MAIN FEATURES: Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. RESULTS: To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. OUTLOOK: Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.     

Formation of Nitrate and Sulfate in the Plume of Berlin (8 pp)

Background, Aims and Scope Secondary inorganic aerosol (SIA), i.e. particulate sulphate (S(VI)), ammonium and nitrate (N(V)) is formed from gaseous precursors i.e., sulfur dioxide (S(IV)), ammonia and nitrogen oxides, in polluted air on the time-scale of hours to days. Besides particulate ammonium and nitrate, the respective gaseous species ammonia and nitric acid can be formed, too. SIA contributes significantly to elevated levels of respirable particulate matter in urban areas and in strongly anthropogenically influenced air in general. Methods The near-ground aerosol chemical composition was studied at two stationary sites in the vicinity of Berlin during a field campaign in summer 1998. By means of analysis of the wind field, two episodes were identified which allow to study changes within individual air masses during transport i.e., a Lagrangian type of experiment, with one station being upwind and the other downwind of the city. By reference to a passive tracer (Na+) and estimates on dry depositional losses, the influences of dispersion and mixing on concentration changes can be eliminated from the data analysis. Results and Discussion Chemical changes in N(-III), N(V) and S(VI) species were observed. SIA i.e., N(V) and S(VI), was formed from emissions in the city within a few hours. The significance of emissions in the city was furthermore confirmed by missing SIA formation in the case of transport around the city. For the two episodes, SIA formation rates could be derived, albeit not more precise than by an order of magnitude. N(V) formation rates were between 1.4 and 20 and between 1.9 and 59 % h-1 on the two days, respectively, and S(VI) formation rates were > 17 and > 10 % h-1. The area south of the city was identified as a source of ammonia. Conclusion The probability of occurrence of situations during which the downwind site (50 km downwind of Berlin) would be hit by an urban plume is > 7.4%. Furthermore, for the general case of rural areas in Germany it is estimated that for more than half of these there is a significant probability to be hit by an urban plume (> 8%). The S(VI) formation rates are higher than explainable by homogeneous gas-phase chemistry and suggest the involvement of heterogeneous reactions of aerosol particles. Recommendation and Outlook The possible contribution of heterogeneous processes to S(VI) formation should be addressed in laboratory studies. Measurements at more than two sites could improve the potential of Lagrangian field experiments for the quantification of atmospheric chemical transformations, if a second downwind site is chosen in such a way that, at least under particular stability conditions, measurements there are representative for the source area.     

混凝-氧化法处理印染废水

采用混凝 氧化法对印染废水进行处理 ,得出最佳混凝条件及氧化条件。实验结果表明 ,该法可使印染废水的CODCr与色度去除率分别达到 90 .2 %和 99.1%。该方法具有去除率高、操作方便、设备简单、不产生二次污染等优点。     

SO2的气相光催化氧化及催化剂的失活和再生研究

在模拟大气环境中，紫外光照射以及纳米TiO2光催化剂的作用下，气相无机污染物SO2被完全氧化为SO2或H2SO4。本文提出了SO2的非均相光催化氧化机理，并得出光催化反应速率符合一级动力学过程；经过连续使用之后，TiO2的光催化活性降低，最后活性消失；经过水洗之后，失活的TiO2可以得到再生。失活的TiO2和新鲜的TiO2的IR和XPS光谱差异表明，失活的TiO2表面存在H2SO4，其被认为是使催化剂失活的成分。     

药物合成废水处理工程

针对氯唑沙宗、枸橼酸莫沙必利化学原料药合成过程中产生的有机废水浓度高、成分复杂及处理难度大等特点（COD高达80 000 mg/L左右）,采用催化氧化-生物化学方法,试验研究了药物合成废水处理.试验结果表明,该技术对合成废水的COD去除率可达98%,SS去除率可达96%,色度降到50倍左右,其去除率约为98%.该系统运行费用为0.4～0.5元/m^3废水.经过3个月的工程运行,表明催化氧化-生物化学处理药物合成废水系统是一种高效率、低能耗、运行管理方便、经济可行的处理方法.处理类似制药废水这样的高浓度有机废液,上述废水处理工艺具有广阔的应用前景.     

水解-酸化法在味精废水处理中的应用

结合江苏南通天字味精厂的工程实例,介绍了以水解-酸化法为主体的味精废水处理工艺的原理、特点和应用中注意的问题.该工艺运行结果表明:在治理味精废水方面具有较佳的耐冲击性能;出水稳定达标;操作运行管理方便;投资成本和运行费用均较低.从其优势看有良好的应用前景.     

Ferrioxalate-mediated photodegradation and mineralization of 4-Chlorophenol

INTENTION, GOAL, SCOPE, BACKGROUND: Advanced oxidation processes are powerful methods which are capable of transforming refractory, nonbiodegradable and/or toxic organic compounds into harmless end products such as carbon dioxide and water. However, one commen problem of all advanced oxidation processes is the high demand of electrical energy for ultraviolet lamps, which causes high operational costs. Minimization of the required irradiation time, and therefore the energy consumption, by optimization of other reaction conditions such as catalyst-oxidant type and concentration, pH, temperature, pollutant/oxidant ratio etc., therefore continues to gain importance. OBJECTIVE: The main objective of this study was the minimization of the required irradiation time through optimization of the use of a newly patented catalyst, ferrioxalate, and also to compare the performance of this catalyst with the performance of other AOPs. METHODS: Oxidation of 4-chlorophenol by photo-Fenton process using potassium ferrioxalate as a mediator was studied in a lab scale photoreactor. The influence of parameters such as hydrogen peroxide and ferrioxalate concentrations, initial pH, power-output, oxalate/iron ratio and different iron sources was evaluated. An upflow photoreactor equipped with a 1000 Watt high-pressure mercury vapour lamp and operating in a recirculation mode was used during photodegradation experiments. The extent of the reduction of 4-chlorophenol, Total Organic Carbon and Chemical Oxygen Demand was used to evaluate the photodegradation reaction. RESULTS AND DISCUSSION: The optimum pH range observed was found to be 2.7-3. The efficiency of 4-chlorophenol oxidation increased with increasing concentrations of hydrogen peroxide and ferrioxalate, reaching a plateau after the addition of 10 and 0.072 mM of those reagents, respectively. Using an Oxalate/iron ratio of 12 was 18% less efficient than using a ratio of 3:1. The efficiency increased with increasing radiation power. However, this increase was not linear. The UV/ferrioxalate/H2O2 process, by which complete mineralization of 100 mg l(-1) 4-chlorophenol was achieved in 20 min of total reaction time, was the most efficient process among the alternatives applied. CONCLUSIONS: The use of ferrioxalate as the catalyst was found to be more efficient than the use of Fe(II) and Fe(III) iron species. It was possible to completely mineralize 4-chlorophenol. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate that the ferrioxalate-mediated degradation of 4-chlorophenol requires less irradiation times than other advanced oxidation processes. There are mainly 19 phenol isomers and other toxic and nonbiodegradable organic compounds. We recommend that similar studies should be performed on many such compounds in order to attain a clear understanding of the performance of this catalyst. Because of its light sensitivity, this catalyst should be used immediately after its preparation. The use of low pressure mercury vapour lamps in this process should also be considered, since low power outputs may be enough for the process.     

Oxidation of polycyclic aromatic hydrocarbons by fungal isolates from an oil contaminated refinery soil

BACKGROUND AND OBJECTIVE: Indigenous soil microorganisms are used for the biodegradation of petroleum hydrocarbons in oily waste residues from the petroleum refining industry. The objective of this investigation was to determine the potential of indigenous strains of fungi in soil contaminated with petroleum hydrocarbons to biodegrade polycyclic aromatic hydrocarbons (PAH). MATERIALS AND METHODS: Twenty one fungal strains were isolated from a soil used for land-farming of oily waste residues from the petrochemical refining industry in Singapore and identified to genus level using laboratory culture and morphological techniques. Isolates were incubated in the presence of 30 mg/L of phenanthrene over a period of 28 days at 30 degrees C. The most effective strain was further evaluated to determine its ability to oxidise a wider range of PAH compounds of various molecular weight i.e acenaphthene, fluorene, fluoranthene, chrysene, benzo(a)pyrene and dibenz(ah)anthracene RESULTS AND DISCUSSION: After 28 days of incubation, 18 of the 21 fungal cultures were capable of oxidising over 50% of the phenanthrene present in culture medium, relative to abiotic controls. Fungal isolate, Penicillium sp. 06, was able to oxidise 89% of the phenanthrene present. This isolate could also oxidise more than 75% of the acenaphthene, fluorene and fluoranthene after 30 days of incubation. However, the oxidation of high molecular weight PAH i.e. chrysene, benzo(a)pyrene and dibenz(ah)anthracene by the Penicillium sp. 06 isolate was limited, where the extent of oxidation was inversely proportional to PAH molecular weight. CONCLUSIONS: Fungal isolate, Penicillium sp. 06, was effective at oxidising a range of PAH in petroleum contaminated soils, but higher molecular weight PAH were more recalcitrant. RECOMMENDATIONS AND OUTLOOK: There is potential for the re-application of this fungal strain to soil for bioremediation purposes.     

Geochemistry and acidity of sulphide-bearing postglacial sediments of western Finland

The geochemistry, mineralogy, acidity and electric conductivity of sulphide-bearing postglacial sediments located on the coastal plains of western Finland were studied. Grain size and mineralogical analysis (eight samples studied) indicated that the sediments are silts dominated by primary minerals (quartz, feldspars), and that the clay fraction (<2µm), which made up less than one-third of the bulk samples, is enriched in phyllosilicates but depleted in quartz and feldspars, relative to bulk samples. As compared to the metal contents of the fine-fraction of glacial till (data of the Geological Survey of Finland), the fine sediments appear to be enriched in sulphur (median = 0.54%) and trace metals such as Ni (31 µg g^–1), Zn (90 µg g^–1), Co (13 µg g^–1), Cr (48 µg g^–1) and V (50 µg g^–1). Statistical analysis indicated that aluminosilicates are the principal carrier phases of trace metals, and that sulphides and organic matter only partially control the distribution of elements other than S and C. A 3-g portion of 232 samples was oxidised in the laboratory by atmospheric oxygen for a period of 1 year. After this period of oxidation, 15 ml of water was added, after which pH and electric conductivity of the suspensions (sediment:water, 1:5) were measured. The quantities of elements mobilised by the oxidation was calculated from the dissolved concentrations found in 3 g of oxidised sediment suspended in 30 ml of deionised water (eight samples studied). The results of the experiment showed that the impact of sulphide oxidation on the pH and conductivity of the sediments is large, and that a high proportion (>13%) of the aqua-regia extractable contents of several elements (Co, Mn, Ca, Ni, Zn, Sr, Na and B) are mobilised at oxidation. Because of the high quantities of acidity and metals liberated at oxidation, it is argued that stream-water quality, which is poor in the study area, will not improve unless artificial draining is restricted in areas of sulphide sediments.     

苯酚的超临界水氧化试验

以自建的一套连续式超临界水氧化装置的温度，压力，溶氧量和流量等参数的可控性进行了实验，并在此基础上进行了苯酚的超临界水氧化研究。结果表明：所建立的装置能比较精确控制各种条件参数，是可靠的超临界水氧化试验研究装置。在氧气过量的条件下，停留时间是影响苯酚在超临界水中氧化分解的主要因素，反应的温度和压力升高导致苯致苯酚去除率的增大，只要有足够的氧气，苯酚起始浓度的增加对苯酚的转化率影响不明显，在实验条件下，溶液中苯酚的去除动力学对苯酚是一级，氧气是零级。