A preliminary process design and economic assessment of a catalyst rejuvenation process for waste disposal of refinery spent catalysts

Spent hydroprocessing catalysts from refineries have been classified as hazardous solid waste by the United States Environmental Protection Agency (USEPA), refiners must find a viable but economical solution to solve this serious environmental issue. Catalyst rejuvenation is an attractive option for minimizing the environmental problems associated with spent catalysts. In this study, a preliminary design for such a process and the corresponding economic analysis are performed to assess the proposed catalyst rejuvenation process for metal-fouled spent catalysts generated in residue hydroprocessing units. The scenarios used in the economic assessment are based on three options of process synthesis and two operator modes. It is found that the option of rejuvenating medium and lightly fouled spent catalyst produced by the refinery will be the best solution for refiners, both environmentally and economically.     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

浅析报废汽车拆解厂废水循环处理技术的应用现状

报废汽车的回收拆解处理在我国已经逐渐兴起，但由于该产业尚处于发展初期，环保技术手段和可持续性发展意识还不够，因此在回收拆解过程中会产生大量的废水和其他污液。针对某汽车回收拆解厂的废水特性进行实验研究，形成“电荷凝集过滤一活性炭吸附”组合工艺，对报废汽车回收拆解企业的废水处理提供了一定的参考价值。     

THE W-INDEX FOR RESIDENTIAL WATER CONSERVATION1

ABSTRACT: An index of residential water efficiency - a “W-Index” - can serve as a measure of effectiveness of water conservation features in the home. The index provides a calculated numerical value for each dwelling unit, derived from the number and kind of water-saving features present, including indoor and outdoor water savers and water harvesting or recycling systems. A W-Index worksheet, devised for on-site evaluation of single-family residences in the Tucson, Arizona, region shows that a nonconserving residence with all the water-using features would use 151,000 gallons per year or 148 gallons per capita per day (gpcpd), while the fully conserving model would use 35,300 gallons per year or 35 gpcpd and with water harvesting and graywater recycling systems would have a maximum W-Index of W-160. A Tucson water conservation demonstration home, Casa del Agua, received a rating of W-139, and field tests of about 30 homes in new Tucson subdivisions show values ranging from W-75 to W-100, indicating the incorporation of some water conservation in current new models. By adjustment of some climatic or water-use parameters, the W-Index format can be applied to various types of dwelling units or to other urban areas. The W-Index can be used by individual homeowners or builders to evaluate water efficiency of residential units, or by water providers or water management agencies as a device for promoting and achieving water conservation goals.     

利用煮茧废水培养钝顶螺旋藻的初步研究

本文对缫丝厂煮茧废水和Ｚａｒｒｒｏｕｋ培养基的主要营养成份进行了分析比较，筛选出了适合钝顶螺旋藻（Ｓｐｉｒｕｌｉｎａｐｌａｔｅｎｓｉｓ）在煮茧废水中生长繁殖的培养基和与之相适应的驯化藻种。经室外１５０升煮茧废水扩大培养，干藻生物量可达１６．０３克／米￣２·天，粗蛋白含量达５８．６％，含有１７种氨基酸。比用Ｚａｒｒｏｕｋ培养基培养的螺旋藻产量提高１５．７８％，成本减少８０％以上。培养后的煮茧废水ＣＯＤ和ＢＯＤ＿５浓度低于我国污水综合排放标准。研究结果表明：采用本实验室筛选的煮茧废水培养基和驯化藻种，在煮茧废水中大量培养螺旋藻，实现废水资源化是可行的，具有明显的经济效益和环境效益。     

Wastewater reuse in Muslim countries: An Islamic perspective

Recycling wastewater seems to have become a highly useful technique for meeting the shortage of fresh water in all parts of the world. It seems all the more important for Muslim countries because a large number of these countries face acute fresh water shortage. This paper views the problem from an Islamic viewpoint, that is, in the light of the Qur'n, theSunnah, andFiqh works.In Islamic law, water is classified into three categories oftahr,thir, andmutanajjis. The last two categories can be transmuted intotahr water and thus may be used for all mundane as well as religious purposes if they are assimilated into the overall supply oftahr water. This would be lawful from the Islamic viewpoint even without treating the water. To make use of modern technology in order to recycle wastewater effluents after treatment seems quite in keeping with the spirit and letter of the Islamic teachings.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

浙江省废纸再生产业的经验、问题及对策

文章分析了浙江省在废纸再生方面的3个典型模式的经验，指出了存在的问题并提出了建议对策。     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.     

AN OPTIMIZATION MODEL FOR EFFICIENT MANAGEMENT OF URBAN WATER RESOURCES1

ABSTRACT: A mathematical programming model is proposed to determine economically efficient urban water resource allocation and pricing policy by maximizing the sum of the consumer and producer surplus. The optimization of this nonlinear problem is accomplished by the use of linear programming algorithm. The feasibility of using recycled water for municipal purposes is examined in a planning context. The impact of higher water quality discharge standards on pricing and allocation of water is analyzed and the attractiveness of water reuse option is demonstrated.