MIEX树脂特性及其在饮用水处理中的应用

阐述了MIEX阴离子交换树脂的特性及其在饮用水处理中对消毒副产物前质、色度、浊度、藻类等的去除效果.对近年来MIEX树脂与超滤、活性炭、臭氧等工艺组合的应用情况进行了介绍,初步分析了MIEX树脂用于净水处理的经济性.     

Effects of reductive inorganics and NOM on the formation of chlorite in the chlorine dioxide disinfection of drinking water

Chlorine dioxide (ClO₂) disinfection usually does not produce halogenated disinfection by-products, but the formation of the inorganic by-product chlorite (ClO₂^–) is a serious consideration. In this study, the ClO₂^– formation rule in the ClO₂ disinfection of drinking water was investigated in the presence of three representative reductive inorganics and four natural organic matters (NOMs), respectively. Fe²⁺ and S^2– mainly reduced ClO₂ to ClO₂^– at low concentrations. When ClO₂ was consumed, the ClO₂^– would be further reduced by Fe²⁺ and S^2–, leading to the decrease of ClO₂^–. The reaction efficiency of Mn²⁺ with ClO₂ was lower than that of Fe²⁺ and S^2–. It might be the case that MnO₂ generated by the reaction between Mn²⁺ and ClO₂ had adsorption and catalytic oxidation on Mn²⁺. However, Mn²⁺ would not reduce ClO₂^–. Among the four NOMs, humic acid and fulvic acid reacted with ClO₂ actively, followed by bovine serum albumin, while sodium alginate had almost no reaction with ClO₂. The maximum ClO₂^– yields of reductive inorganics (70%) was higher than that of NOM (around 60%). The lower the concentration of reductive substances, the more ClO₂^– could be produced by per unit concentration of reductive substances. The results of the actual water samples showed that both reductive inorganics and NOM played an important role in the formation of ClO₂^– in disinfection.     

吉林西部农业旱灾变化趋势及其成因分析

利用吉林西部近50年的农业成灾面积统计资料和气象资料，提示了西部的农业旱灾整体呈波动上升的变化趋势。特别是进入20世纪80年代以后，在全球温暖化的大环境背景下．旱灾已成为当地农业可待续发展的最主要的障碍因素，并引起一系列的生态环境问题。影响农业的旱灾既有自然因素又有人为因素。针对吉林西部的旱灾，提出了一系列减灾对策。     

Carbon sequestration in soils of SW-Germany as affected by agricultural management—Calibration of the EPIC model for regional simulations

Global emissions trading allows for agricultural measures to be accounted for the carbon sequestration in soils. The Environmental Policy Integrated Climate (EPIC) model was tested for central European site conditions by means of agricultural extensification scenarios. Results of soil and management analyses of different management systems (cultivation with mouldboard plough, reduced tillage, and grassland/fallow establishment) on 13 representative sites in the German State Baden-Württemberg were used to calibrate the EPIC model. Calibration results were compared to those of the Intergovernmental Panel on Climate Change (IPCC) prognosis tool. The first calibration step included adjustments in (a) N depositions, (b) N₂-fixation by bacteria during fallow, and (c) nutrient content of organic fertilisers according to regional values. The mixing efficiency of implements used for reduced tillage and four crop parameters were adapted to site conditions as a second step of the iterative calibration process, which should optimise the agreement between measured and simulated humus changes. Thus, general rules were obtained for the calibration of EPIC for different criteria and regions. EPIC simulated an average increase of +0.341 Mg humus-C ha⁻¹ a⁻¹ for on average 11.3 years of reduced tillage compared to land cultivated with mouldboard plough during the same time scale. Field measurements revealed an average increase of +0.343 Mg C ha⁻¹ a⁻¹ and the IPCC prognosis tool +0.345 Mg C ha⁻¹ a⁻¹. EPIC simulated an average increase of +1.253 Mg C ha⁻¹ a⁻¹ for on average 10.6 years of grassland/fallow establishment compared to an average increase of +1.342 Mg humus-C ha⁻¹ a⁻¹ measured by field measurements and +1.254 Mg C ha⁻¹ a⁻¹ according to the IPCC prognosis tool. The comparison of simulated and measured humus C stocks was r² ≥ 0.825 for all treatments. However, on some sites deviations between simulated and measured results were considerable. The result for the simulation of yields was similar. In 49% of the cases the simulated yields differed from the surveyed ones by more than 20%. Some explanations could be found by qualitative cause analyses. Yet, for quantitative analyses the available information from farmers was not sufficient. Altogether EPIC is able to represent the expected changes by reduced tillage or grassland/fallow establishment acceptably under central European site conditions of south-western Germany.     

Neutral modelling of agricultural landscapes by tessellation methods—Application for gene flow simulation

Neutral landscape models are not frequently used in the agronomical domain, whereas they would be very useful for studying given agro-ecological or physical processes. Contrary to ecological neutral landscape models, agricultural models have to represent and manage geometrical patches and thus should rely on tessellation methods. We present a three steps approach that aimed at simulating such landscapes. Firstly, we characterized the geometry of three real field patterns; secondly, we generated simulated field patterns with two tessellation methods attempting to control the value of some of the observed characteristics and, thirdly, we evaluated the simulated field patterns. For this evaluation, we considered that good simulated field patterns should capture characteristics of real landscapes that are important for the targeted agro-ecological process. Real landscapes and landscapes simulated using either a Voronoi or a rectangular tessellation were thus compared when used as input data within a gene flow model. The results showed that neither tessellation method captured field shapes correctly, thus leading to over or (small) under estimation of gene flow. The Voronoi tessellation, though, performed better than the rectangular tessellation. Possible research directions are proposed to improve the simulated patterns, including the use of post-processing, the control of cell orientation or the implementation of other tessellation techniques.     

Vegetable fibres from agricultural residues as thermo-mechanical reinforcement in recycled polypropylene-based green foams

Novel lightweight composite foams based on recycled polypropylene reinforced with cellulosic fibres obtained from agricultural residues were prepared and characterized. These composites, initially prepared by melt-mixing recycled polypropylene with variable fibre concentrations (10-25 wt.%), were foamed by high-pressure CO₂ dissolution, a clean process which avoids the use of chemical blowing agents. With the aim of studying the influence of the fibre characteristics on the resultant foams, two chemical treatments were applied to the barley straw in order to increase the α-cellulose content of the fibres. The chemical composition, morphology and thermal stability of the fibres and composites were analyzed. Results indicate that fibre chemical treatment and later foaming of the composites resulted in foams with characteristic closed-cell microcellular structures, their specific storage modulus significantly increasing due to the higher stiffness of the fibres. The addition of the fibres also resulted in an increase in the glass transition temperature of PP in both the solid composites and more significantly in the foams.     

Extractable atrazine and its metabolites in agricultural soils from the temperate humid zone

Extractable atrazine and its metabolites (hydroxyatrazine, deethylatrazine and deisopropylatrazine) were evaluated in agricultural soils from the temperate humid zone (Galicia, NW Spain) under laboratory conditions. The experiment was performed with five soils with different properties (organic C, soil texture and atrazine application history), both unamended and treated with atrazine at field application rate. Measurements of the atrazine compounds were made at different time intervals (1, 3, 6, 9 and 12 weeks) during a 3-month incubation period. Results showed that only hydroxyatrazine was detected in the extractable fraction of the unamended soils, with values remaining relatively constant throughout the incubation period. Atrazine addition notably increased the concentration of the parent compound and its degradation products; deisopropylatrazine and hydroxyatrazine were the main metabolites detected in the extractable fraction of the treated soils, whereas deethylatrazine was not detected. After 7 days incubation, values of total extractable residues, expressed as percentage of initially added atrazine, ranged from 75 to 86% (25–68% of atrazine, 7–11% of hydroxyatrazine and 9–57% of deisopropylatrazine). The values decreased rapidly during the first 3 weeks of incubation, showing values of 2–8% in soils with higher atrazine application and from 28 to 30% in soils with lower application history. At the end of the incubation, 2–8% of total extractable residues were still detected (0–4% of atrazine, 2–3% of hydroxyatrazine and 0–2% of deisopropylatrazine), indicating a residual effect of atrazine addition. These variations in the extractable fraction indicated that most added atrazine was rapidly degraded, especially in soils with higher application history.     

三氯乙醛前驱物的筛选及其生成影响因素探讨

选取苹果酸、酒石酸、柠檬酸、色氨酸、组氨酸、酪氨酸代表自然界中低分子量的有机酸和氨基酸,实验室模拟氯化,GC/MS确证了氯化产物中的三氯乙醛,GC-ECD定量测定了氯化产物中三氯乙醛的浓度,筛选了生成三氯乙醛主要前驱物,并进一步探讨了各种因素对三氯乙醛形成的影响。     

污染农田土壤修复产业发展面临的问题及建议

随着经济的发展,我国的农业建设也迎来了新的发展机遇,但是目前我国的农业发展过程中存在着严重的土壤污染问题,污染农田土壤修复的问题有待解决。本文围绕污染农田土壤修复这一问题展开研究,望有所助益。     

顺序氯化对微生物、副产物和生物稳定性的综合控制

在中试规模试验中,研究了“短时游离氯后转氯胺的顺序氯化消毒工艺”对微生物、消毒副产物和生物稳定性指标的控制效果.该顺序氯化消毒工艺综合利用了游离氯消毒灭活微生物迅速彻底,氯胺消毒副产物生产量低的特点,通过氯化消毒技术的组合,安全经济地实现了消毒卫生学和消毒副产物指标的双重控制.该消毒工艺对细菌总数、异养菌平板计数、总大肠菌群指标的控制效果略好于传统游离氯消毒,对脊髓灰质炎病毒和大肠杆菌f2噬菌体的灭活效果与游离氯相同.相同原水条件下,顺序氯化消毒工艺比游离氯消毒工艺产生的三卤甲烷浓度减少35.8%～77.0%;卤乙酸减少36.6%～54.8%.消毒进水水质越差,顺序氯化消毒工艺在消毒副产物控制方面就越有优势.该工艺对生物稳定性指标的控制效果明显高于游离氯消毒.