When creativity enhances sales effectiveness: The moderating role of leader–member exchange

This study extends research on creativity by exploring the boundary conditions of the creativity–job effectiveness relationship. Building on social exchange theory, we argue that the extent to which employee creativity is related to sales—an objective work effectiveness measure—depends on the quality of leader–member exchange (LMX). We hypothesize that the relationship between creativity and sales is significant and positive when LMX is high, but not when LMX is low. Hierarchical linear modelling analysis provided support for the interaction hypothesis in a sample of 151 sales agents and 26 supervisors drawn from both pharmaceutical and insurance companies. Results showed that sales agents who were more creative generated higher sales only when they had high‐quality LMX. An ad hoc qualitative study provided a more detailed understanding of the moderator role played by LMX. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Permeability of Medical Gloves to Mono- and Dimethacrylate Monomers in Dental Restorative Materials

Dental personnel manually handle methacrylate-based restorative materials, which can cause skin irritation and allergies. The protection given by different types of medical gloves is not well known. Breakthrough time (BTT, min) was used as a measure of protection according to a European standard, using 2 test mixtures consisting of respectively 3 and 5 monomers. Fourteen gloves representing natural rubber latex, synthetic rubber, and synthetic polymeric material were tested. The BTT ranged from some minutes to more than 2 hrs for the 4 monomers with a molecular mass less than 300. The longest protection was recorded for Nitra Touch (nitrile rubber), Tactylon (synthetic rubber), and Metin (PVC).     

基于热湿交换理论的巷道风流温、湿度影响因素研究

为了研究巷道风流参数的影响因素、预测风流温湿度的变化规律,结合热湿交换理论,建立了风流与围岩壁面之间热湿交换的数学模型,以及贴体坐标系下围岩内部温度场的导热微分方程;利用数值方法,将围岩内部的导热问题与影响风流参数变化的热湿交换问题耦合起来,并以大柳塔煤矿52505综采工作面为例进行计算,得到了与实测参数较为一致的模拟结果,验证了该数值方法的有效性。研究结果表明:风流温度受原始岩温、入风流温度、局部热源强度等因素的影响,风流相对湿度与入风流温、湿度以及井下湿源的数量和强度有关;巷道壁温作为将围岩温度场与风流参数之间关联起来的主要因素,对模拟结果影响较大,其数值取决于壁面与风流之间热湿交换以及围岩原始岩温。     

员工-组织社会交换与安全绩效的关系:基于广东企业的实证研究

为了探索员工-组织社会交换与安全绩效的作用关系,以广东省5家制造业企业员工为调查对象,基于社会交换理论,运用Mplus建立结构方程模型对74个团队468份有效问卷进行实证研究。研究结果表明:员工-组织社会交换对安全促进心理所有权和安全绩效均具有显著正向影响,员工-组织社会交换可以通过安全促进心理所有权的中介效应最终影响安全绩效。服务型领导跨层调节员工-组织社会交换与安全促进心理所有权之间的关系,并可进一步调节安全促进心理所有权的中介作用。     

直接利用葡萄糖的液流催化燃料电池改进

液相催化燃料电池（LCFC）可直接处理生物质并产电,而电池结构等因素对电池性能有明显影响,但目前还缺乏上述方面的研究。通过系列产电实验考察了温度和酸化条件对Nafion115膜性能的影响、不同氧化条件下石墨毡的改性效果以及电池内部导流槽在不同葡萄糖浓度条件下的影响。结果表明：质子交换膜适宜以80 ℃酸化处理,该条件下电池功率密度达到5.39 mW·cm-2;石墨毡改性适宜以50 mL·min-1干空气流速在420 ℃条件下对其进行煅烧,该条件下电池功率密度进一步提升至6.21 mW·cm-2;葡萄糖浓度显著影响电池性能,当浓度为2.0 mol·L-1时,导流槽结构会降低电池性能,当浓度为1.0 mol·L-1和0.50 mol·L-1时,导流槽结构使电池性能更优,并且也更加稳定。     

粉末活性污泥处理含铀废水的特性

以生活污水处理厂剩余活性污泥为原料,制备粉末活性污泥(PAS)作为生物吸附剂,考察pH值,PAS投加量,U(Ⅵ)初始浓度和吸附时间对PAS吸附U(Ⅵ)的影响,探讨了PAS吸附U(Ⅵ)的作用机理。实验结果表明,在U(Ⅵ)初始浓度为10 mg/L时,其最佳吸附pH值为3,去除率97.77%,吸附平衡时间120 min;吸附过程较好地拟合了准二级动力学模型(R2≈1)和Freundlich等温模型(R2≈1);X射线能谱和离子交换实验分析表明,离子交换为其主要吸附方式,参与交换的主要离子为Ca2+;红外光谱分析表明,PAS吸附U(Ⅵ)后自身结构未发生改变。以0.1 mol/L的HCl溶液作为解吸液,初次解吸率达92.83%,循环利用3次仍具有较好的吸附效果。     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

海藻酸钠/锆@钙水凝胶的制备及其对磷的吸附研究

利用简便的方法制备了一种新型的海藻酸钠/锆@钙(SA/Zr@Ca)水凝胶材料,采用SEM、XRD对该材料进行了表征,并通过拟合吸附等温模型及吸附动力学模型,结合XPS和Zeta电位分析,研究了该材料对磷酸盐吸附的性能和机理.结果表明,该材料为非晶态的无定型材料.在溶液初始pH为2～7时,SA/Zr@Ca对磷酸盐(以PO...     

离子交换法选择性回收污泥厌氧消化液中的磷

为探讨高效选择性回收污泥厌氧消化液中磷的离子交换方法,采用静态实验和动态实验研究了4种阴离子交换树脂（D213、D202、D301和DSQ）的磷回收性能,筛选了适合富磷污泥厌氧消化液选择性磷回收的高交换容量树脂。实验结果表明,D213、D202、D301和DSQ 4种树脂对正磷浓度为70 mg/L的厌氧消化液进行动态处理时,其最大穿透体积分别为3、7、17和90 BV;DSQ树脂磷交换容量远高于其他3种树脂,达到6 860 mg P/L湿树脂,是目前报道的高磷交换容量树脂的3~4倍;DSQ树脂能有效地抵抗厌氧消化液中有机质和硫酸根等阴离子的干扰;用NaOH溶液再生DSQ树脂并回收磷,磷洗脱率超过96%,洗脱液是高浓度含磷液,可作为磷矿石的优质替代品。研究表明,DSQ树脂是一种高效选择性分离磷的树脂,适用于污泥厌氧消化液的磷回收。