MBR中好氧颗粒污泥的培养及其特性研究

以厌氧颗粒污泥为接种污泥在膜生物反应器中培养好氧颗粒污泥,通过对3个培养阶段污泥生长情况的考察,研究了颗粒污泥的变化规律及特性.结果表明:污泥在培养初期MLSS和SV均增长缓慢,污泥沉降性能较差,但到成熟期ρ(MLSS)可以达到8 g·L-1左右,SV和SVI也由接种时的11.4%,34.9 mL·g-1增为42%,52.9 mL·g-1,整个培养过程只用了60 d.此外,颗粒污泥的表观性状及颗粒粒径在不同的时期也有鲜明的特征.     

刚粘塑性有限元数值模拟中粘性系数的获取方法

以塑性元件和粘性元件并联的模型为基础,研究材料粘性系数的获取方法,给出了一些材料的粘性系数和影响因素之间的关系曲线,为模拟研究中粘性系数的获取提供一种方便有效的方法.     

Effects of red-yellow soil acidification on seed germination of Chinese pine

Acid treatments significantly change the physical and chemical properties of red-yellos soil by lowering its pH value and leaching out aluminum(Al) ions that are harmful to the growth of plants.The structure of soil will be damaged,resulting in higher viscosity,higher water retention rate and lower air permeability of the soil.The germination rate of Chinese pine(Pinus tabulacformic Carr.)seeds sowed in soil treated with sulphuric acid(H2SO4) decreased compared to that for untreated soil.The direct cause was the large amount of Al ions leached out because of low pH values(≥3.5).The added acid decreased the soil aggregation and increased the number of micro-aggregates(under 250 μmin diameter).Such changes increased the soil‘s viscosity,which tied the pine needles to the soil after the seeds had germinated and prevented the seedlings from fully developing.     

两性聚电解质絮凝剂的合成及特性粘数

研究了两性聚电解质絮凝剂的合成方法对其特性粘数的影响,发现单体配比、pH及聚合引发剂品种和剂量均对两性聚电解质絮凝剂的特性粘数有明显作用。     

Kinetic analysis for spontaneous combustion of sulfurized rust in oil tanks

In order to evaluate the spontaneous combustion hazards of sulfurized rust in oil tanks, one kind of rust was obtained from respiratory valve inner cavity of a crude oil tank in a petrochemical company. The rust was sulfurized in sulfuration experimental apparatus. The production was analyzed by X-ray energy dispersive spectrometry (EDS), scanning electron microscopy (SEM) and then thermo-gravimetric analysis (TGA). The EDS result shows that the main substances are FeS and FeS₂ which are liable to spontaneous combustion. The sulfurized rust gives a short length of side and diamond appearance, and a large pore size in structure based on X-ray Diffraction (XRD). The whole oxidation process has three complex stages. The corresponding apparent activation energy values, most probable mechanism functions and pre-exponential factor values were calculated by Madhusudanan–Krishnan–Ninan method and the master plot method. The results indicate that the first and third stages of mass loss are up to the power function mechanism, but the second stage accords with the nucleation and nucleus growth mechanism. The values of apparent activation energy increase successively from the first stage to the third stage. The second stage has the maximum pre-exponential factor value, while the first has the minimum. With the obtained parameters above, the oxidation process of sulfurised rust could be simulated, which would benefit for monitoring and early warning of oil tanks.     

Effect of Starch Granule Size on Viscosity of Starch-Filled Poly(hydroxy ester ether) Composites

The effect of starch granule size on the viscosity of starch-filled poly(hydroxy ester ether) (PHEE) composites was characterized using size-fractionated potato starch, as well as unfractionated starches (rice, corn, wheat, and potato). Potato starch was separated using an air classifier into four particle size fractions: <18 m, 18-24 m, 24-30 m, and >30 m. The starch was dried to a moisture content of 0.5% to minimize moisture effects on composite rheology. PHEE and potato starch were extruded with starch volume fractions of 0.46 and 0.66. Stress relaxation, frequency and strain sweep, and temperature-dependence measurements were carried out. Although small variations in viscosity were seen with the different potato starch fractions, differences were not significant at a volume fraction of 0.46. Viscosity differences between the different particle size fractions were more pronounced at a volume fraction of 0.66. The temperature dependence could be described by an Arrhenius relation, with an apparent activation energy of 84 kJ/mole. At a volume fraction of 0.46, the starch/PHEE viscosities increased in the order potato starch < wheat starch corn starch < rice starch.     

某定向钻工程中泥浆的配制及注意事项

介绍了某定向钻工程中黏土层、细砂中砂层、粉砂合砾地层泥浆的配制工艺及斜孔段、水平孔段、扩孔段、回拖段施工过程泥浆性能的调整方法。简述了该穿越工程泥浆的混配、回收及处理应注意的若干事项。实践表明,该水平定向钻穿越工程施工质量较好,其安全与环保工作也较为理想。     

硅酸聚合过程中粘度变化的研究

在制备聚硅酸盐类混凝剂的过程中,聚硅酸的粘度是影响聚硅酸盐类混凝剂混凝效能的重要因素。以水玻璃为原料,硫酸、盐酸为酸化剂,采用酸性条件下制备聚硅酸的方法,研究pH值、二氧化硅浓度、温度、不同酸化剂等因素对硅酸聚合过程中粘度变化的影响,结果表明：粘度达到0.006 Pa.S前变化缓慢,粘度达到0.009 Pa.S后变化迅速,0.020 Pa.S以后在极短的时间内粘度急剧增大而胶凝;通过混凝搅拌实验确定制备聚硅酸铝混凝剂时聚硅酸粘度的最佳值,以此最佳值作为控制聚硅酸最佳聚合程度的指标。