聚合铝的形态稳定性及其动电特性的研究

本文采用改进的Ａｌ－Ｆｅｒｒｏｎ快速测定法研究了混凝过程中铝盐与聚合铝水解形态的转化规律及稳定性，并对混凝反应过程中铝与聚合铝溶解－沉淀形态分布与理论溶解度进行了对比，同时采用流动电流技术直接测定了铝盐与聚合铝絮凝剂的荷电状况，最后对发生在混凝过程中铝与聚合铝最佳凝聚形态进行了讨论。     

边坡稳定性的线性罗吉特分析

应用线性罗吉特模型，本文提出了边坡破坏概率估计的新方法，由收集到的边坡实例建模，进而用于待判边坡破坏概率计算，就能预测待判边坡的稳定程度．结果表明：这种方法具有较高精度     

论大气环境污染与人体肺癌发生率

大气环境污染和人体肺癌发生率密切相关。工业和交通排放大气污染物、厨房污染、吸烟、复印机和居室装饰等造成的大气环境污染过程均能造成居民肺癌发病率的上升。应通过控制工业污染、改变能源结构、戒烟及绿化造林等措施加以解决。     

水库岸坡变形体灾害的信息评价和预测

较真实地评价水库岸坡的稳定性是工程界普遍关注的问题,本文将工程地质逻辑定性分析和信息法定量分析方法结合起来,对丹江口水库库岸岸坡变形体灾害的信息进行评价和预测,分析结果可供工程设计人员参考。     

Landfill aeration in the framework of a reclamation project in Northern Italy

In situ aeration by means of the Airflow technology was proposed for landfill conditioning before landfill mining in the framework of a reclamation project in Northern Italy. A 1-year aeration project was carried out on part of the landfill with the objective of evaluating the effectiveness of the Airflow technology for landfill aerobization, the evolution of waste biological stability during aeration and the effects on leachate and biogas quality and emissions.The main outcomes of the 1-year aeration project are presented in the paper.The beneficial effect of the aeration on waste biological stability was clear (63% reduction of the respiration index); however, the effectiveness of aeration on the lower part of the landfill is questionable, due to the limited potential for air migration into the leachate saturated layers.During the 1-year in situ aeration project approx. 275 MgC were discharged from the landfill body with the extracted gas, corresponding to 4.6 gC/kgDM. However, due to the presence of anaerobic niches in the aerated landfill, approx. 46% of this amount was extracted as CH₄, which is higher than reported in other aeration projects. The O₂ conversion quota was lower than reported in other similar projects, mainly due to the higher air flow rates applied.The results obtained enabled valuable recommendations to be made for the subsequent application of the Airflow technology to the whole landfill.     

珠江三角洲地区大气环境条件的层结特征分析

利用150m内的低探资料,研究了珠江三角洲地区大气环境条件的层结特点,结果表明逆温出现频率较高,逆温层数偏多,逆温层高度低、厚度薄、强度较弱。分析得出该地区的大气环境条件具偏稳定的特征。      

放射性建材实物标准样品的研制

有证实物标准样品"石材放射性标准样品"、"陶瓷产品的放射性标准样品"及"粉煤灰砌块的放射性标准样品"适用于γ谱仪校准和考核相近基质样品中所含放射性核素226Ra、232Th和40K含量测定的准确性,覆盖了建材产品需要检验的所有核素,达到放射平衡。样品由8家权威放射性检测机构采用低本底多道γ能谱仪测量方法进行定值测量,均匀性和稳定性良好,以对人们的安全与健康提供保护。     

电阻焊电极材料热变形行为的研究

电阻焊电极在焊接过程中 ,承受着高温、高压和高电流的作用 ,工作条件十分恶劣。在导电、导热性能差不多时 ,其高温热稳定性的好坏直接影响它的使用寿命。因此 ,针对 3种典型的电极材料 (CuCr,CuCrZrMg ,弥散铜 ) ,进行了热变形行为研究 ,通过分析在不同高温情况下的应力 应变曲线 ,从而确定其高温热稳定性及使用寿命长短。     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

γ-Al2O3负载Mn基催化剂低温催化臭氧氧化NO

利用等体积浸渍法制备γ-Al2O3负载Mn基催化剂,考察了掺杂元素种类,掺杂元素与Mn元素摩尔比以及煅烧温度对NO低温（100 ℃）催化氧化活性的影响,并对催化剂在有SO2或H2O的烟气中的稳定性进行了探究。结果表明,掺杂元素为Ce,Ce/Mn=0.4,煅烧温度为500 ℃条件下制备的催化剂NO催化活性最佳,在NO体积浓度为500×10-6,臭氧浓度为20.9 mg·L-1,n(O3)/n(NO)=0.2,反应温度为100 ℃,模拟烟气总流量为1.0 L·min-1,模拟烟气相对湿度为4%的条件下,NO的转化率最高可达70%。此外,还对催化剂在不同条件下的稳定性和活性恢复情况进行了探究。实验最终实现了在低O3浓度条件下达到较高NO转化率的目的,为烟气脱硝提供了一种具有应用潜力的新技术。