汽车,环境与人类

本文介绍了汽车排气污染、交通噪声等对生态环境和人类健康的危害,探讨了调控对策。     

山东省汽车喷涂行业VOCs排放特征研究

采用气袋采样-气相色谱/质谱法,采集并分析了山东省内小型通用车、货车、电动商务车以及半挂车4类典型汽车喷涂企业挥发性有机物(VOCs)的排放特征。结果表明:山东省汽车喷涂企业中VOCs排放总量以及检出数量排序为:半挂车喷涂企业电动商务车喷涂企业货车喷涂企业小型通用车喷涂企业。各类汽车喷涂企业喷漆以及烘干车间排放的VOCs大多以苯类物质为主(小型通用车面漆烘干车间除外),在小型通用车以及半挂车涂装企业废气中烷烃类物质占比较大。不同企业以及各企业不同工序之间特征VOCs排放浓度有较大差别,喷漆车间特征VOCs浓度要远高于烘干车间。     

Possibilities and limitations of ecotoxicological testing of chemicals

This study concerns the polycyclic aromatic hydrocarbons (PAH's) emission from gasoline and diesel automobile engines.

The sampling procedure, the extraction and the analytical method are presented. Using the gas chromatography‐mass spectrometry technique it is possible to detect and quantify easily about 15 PAH's. Data obtained on exhaust particles collected from gasoline and diesel automobile engines are presented and discussed.     

天然气汽车尾气污染控制的研究进展

综述了国外天然气汽车排放及控制的研究进展，以及排放污染物CO、CO2、NOx、THC、苯、甲醛、乙醛及1-3丁二烯等天然汽汽车排放控制技术仅相当于美国70年代的水平。     

汽车尾气对动物的生物学效应研究

采用动物气管内注入粒物与吸入不同稀释度的汽车尾气等染毒方法，研究其生物效应。结果显示，动物受试后，大鼠肺灌洗液乳酸脱氢酶活性增加，酸性磷酸酶，碱性磷酸酶性和白蛋白含量明显升高，肺巨噬细胞减少，而大鼠血液中ＣＯＨｂ显著增加，小鼠骨髓细胞微核率在中浓度组亦显著增加，３者增呈现良好的测量一反应关系。试验说明，汽车尾气气体部分和颗粒物的毒性作用高于柴油车。     

提高柴油质量减少汽车排气污染

柴油机车应用于道路运输具有许多优点，但环境保护要求减少排气污染、颗粒排放污染至关重要，为此，强化柴油燃料规格是其主要的驱动力。本文介绍了美国，西欧和亚太地区柴油质量现状和趋势，分析了我国柴油燃料质量及其改进意见。     

汽车组装流水线作业工人慢性肌肉骨骼损伤调查研究

从调查３１６名汽车组装流水线作业工人的慢性肌肉损伤情况中发现，其主要不适有右手或右肩的疲劳、下背痛、手腕压痛、前臂压痛及下背压痛等。汽车组装流水作业工人的这些症状和体征与其工作时右上肢活动明显多于左上肢及常处于前倾弯腰体位有关     

市区主要交通路口机动车排气污染现状调查及防治对策

通过对主要交通路口汽车排气污染现状调查,证明交通路口是城市中空气质量最差地段,特别是对人体危害较火的总烃、一氧化碳、氮氧化物污染尤为严重;提出改善城区道路建设、改善燃料质量等防治措施。     

汽车涂装VOCs减排途径探究

汽车涂装VOCs的大量排放严重污染环境且危害人体健康,需对其排放水平加以控制。根据汽车涂装VOCs的产生环节,从原料替代、工艺改善和VOCs治理方式等方面探究其减排途径,提高治理水平。采用环保型涂料从源头减少VOCs排放,优化涂装工艺、采用高涂着率喷枪,优化喷枪与涂装面角度、雾化压力、涂装面距离等可以提高喷涂效率,减少过量喷涂。就治理方式而言,吸附技术适用于中低浓度需回收的VOCs气体,燃烧技术几乎不产生二次污染物,吸附浓缩+燃烧技术因治理效果好而被广泛应用。     

Integrating carbon footprint into supply chain management: the case of Hyundai Motor Company (HMC) in the automobile industry

The purpose of this paper is to improve our understanding of carbon footprint within the context of automobile supply chain management. The case study approach is employed as a research method. Primary data were collected through site visits and extensive interviews with HMC’s corporate and plant management. First, identification and measurement of direct and indirect carbon footprint is critical for mitigating supply chain risks. Second, setting the system boundary of measurement is another important issue to integrate the issue of carbon footprint into supply chain management. Third, developing a map of product carbon footprint facilitates identification and measurement of carbon emissions across the supply chain. Companies today operate in a carbon-constrained world. In particular, the automobile industry is under pressure to take a close look at its product carbon footprint. Managing the downstream consequences of the use of its products and inputs from upstream suppliers is critical for developing carbon risk-mitigated supply chain management. This paper is of benefit to academics and managers by providing a new way to integrate carbon emissions in supply chain management. Since climate change and carbon footprint present challenges to many industries, increasing our understanding of how to integrate carbon footprint in supply chain management is necessary, but has seen little research in the automobile industry.