Carbon accounting of material substitution with biomass: Case studies for Austria investigated with IPCC default and alternative approaches

There is evidence that the replacement of carbon-intensive products with bio-based substitutes (‘material substitution with biomass’) can be highly efficient in reducing greenhouse gas (GHG) emissions. Based on two case studies (CS1/2) for Austria, potential benefits of material substitution in comparison to fuel substitution are analysed. GHG savings are calculated according to default IPCC approaches (Tier 2 method assuming first-order decay) and with more realistic approaches based on distribution functions. In CS1, high savings are achieved by using wood residues for the production of insulating boards instead of energy. The superiority of material substitution is due to the establishment of a long-term carbon storage, the high emission factor of wood in comparison to natural gas and higher efficiencies of gas-fired facilities.The biomass feedstock in CS2 is lignocellulosic ethanol being used for bio-ethylene production (material substitution) or replacing gasoline (fuel substitution). GHG savings are mainly due to lower production emissions of bio-ethylene in comparison to conventional ethylene and significantly lower than in CS1 (per unit of biomass consumed). While CS1 is highly robust to parameter variation, the long-term projections in CS2 are quite speculative.To create adequate incentives for including material substitution in national climate strategies, shortcomings of current default accounting methods must be addressed. Under current methods the GHG savings in both case studies would not (fully) materialize in the national GHG inventory. The main reason is that accounting of wood products is confined to the proportion derived from domestic harvest, whereas imported biomass used for energy is treated as carbon-neutral. Further inadequacies of IPCC default accounting methods include the assumption of exponential decay and the disregard of advanced bio-based products.     

Management of agricultural biomass wastes: Preliminary study on characterization and valorisation in clay matrix bricks

In this work the feasibility of using woody agricultural biomass wastes as grapes and cherries seeds, sawdust, as pore forming agent, and sugar cane ash, as silica precursor, in bricks, were reported.Sawdust and grapes and cherries seeds, thanks to their organic substances content, during their combustion, bring an energetic support in the bricks firing phase and act as pore forming agent. Usually the addition of this kind of waste is limited to 10 wt.% in order to reach an equilibrium between positive (weight and shrinkage decrease and porosity increase) and negative (increase of water absorption and mechanical resistance decrease) effects. The results show that grapes and cherries seeds, added in a percentage of 5 wt.% to a brick formulation, have better influence with respect to the sawdust, maintaining the mechanical properties of the fired brick (950 °C), showing modulus of rupture around 21–23 MPa with a weight reduction of 3–10% (respect to the standard one). Regarding the sugar cane ash, the addition of 5 wt.% improves the mechanical properties (modulus of rupture around 27 MPa) and no weight decrease is observed. These results confirmed the role played by this kind of agricultural waste, which thanks to its high silica content (61 wt.%) is capable to demonstrate a filler and plasticity reducing effect on the brick bodies. Tests carried out highlighted that the addition of these by-products (5 wt.%) do not change negatively the main technological properties measured (water absorption, linear shrinkage, flexural resistance, etc.) and permit to hypothesize their use to obtain bricks with both insulating and higher mechanical properties using a pore agent forming or silica carrier alternative raw materials, respectively.     

Biomass as the Renewable Energy Sources in Malaysia: An Overview

Past and current economic growths of Malaysia have been primarily energized by fossil fuels. Malaysia has very substantial potential for biomass energy utilization given its equatorial climate that is ideal for dense tropical forest growth and agricultural vegetation. There are five major sectors contributing wastes to biomass energy in Malaysia: forestry (wood products), rubber cultivation, cocoa cultivation, sugar cane cultivation and oil palm cultivation. Biomass in Malaysia contributes about 14% of the approximately 340 million barrel of oil equivalent (boe) of energy used every year. This paper provides an overview on the types of biomass being used, the research works on biomass conversion into energy and the present biomass energy projects in Malaysia.     

Turkish Sugar Production Potential and Use of Waste of Sugar Beet as Energy Source

Abstract

Biomass energy is the most renewable energy resource in the world. Biomass energy is derived from plant and animal material, such as wood from forests, residues from agricultural and forestry processes, and industrial, human or animal wastes. The production of biofuels such as ethanol and biodiesel has the potential to replace significant quantities of fossil fuels in many transport applications, electricity, generate heat and steam, etc. In this study, Turkish sugar sector and sugar capacity, residue quantitiy and its possibility of utilization is examined.     

Potential Environmental Benefits from Increased Use of Bioenergy in China

Because of its large population and rapidly growing economy, China is confronting a serious energy shortage and daunting environmental problems. An increased use of fuels derived from biomass could relieve some demand for nonrenewable sources of energy while providing environmental benefits in terms of cleaner air and reduced emissions of greenhouse gases. In 2003, China generated about 25.9 × 10⁸ metric tons of industrial waste (liquid + solid), 14.7 × 10⁸ metric tons/year (t/y) of manure (livestock + human), 7.1 × 10⁸ t/y of crop residues and food-processing byproducts, 2 × 10⁸ t/y of fuelwood and wood manufacturing residues, and 1.5 × 10⁸ t/y of municipal waste. Biofuels derived from these materials could potentially displace the use of about 4.12 × 10⁸ t/y of coal and 3.75 × 10⁶ t/y of petroleum. An increased bioenergy use of this magnitude would help to reduce the emissions of key air pollutants: SO₂ by 11.6 × 10⁶ t/y, NO_X by 1.48 × 10⁶ t/y, CO₂ by 1.07 × 10⁹ t/y, and CH₄ by 50 × 10⁶ t/y. The reduced SO₂ emissions would be equivalent to 54% of the national emissions in 2003, whereas those for CO₂ are 30%. It is important to recognize, however, that large increases in the use of biomass fuels also could result in socioeconomic and environmental problems such as less production of food and damage caused to natural habitats.     

Validation of a multispecies forest dynamics model using 50-year growth from Eucalyptus forests in eastern Australia

One of the key problems confronting ecological forecasting is the validation of computer models. Here we report successful validation of a forest dynamics model Ecosystem Dynamics Simulator (EDS), adapted from the JABOWA-II forest succession model. This model and many variants derived from it have successfully simulated growth dynamics of uneven-aged mixed forests under changing environment with a moderate amount of input data. But rarely are adequate time-series data available for quantitative model validation. This study tested the performance of EDS in projecting the tree density, tree diameter at breast height (dbh), tree height, basal area and aboveground biomass of uneven-aged, mixed species sclerophyll forests in St. Mary state forests of eastern Australia. The test data were collected between 1951 and 2005. Every tree was uniquely numbered, tagged and measured in consecutive re-measurements. Projected growth attributes were compared with those observed in an independent validation dataset. The model produced satisfactory projections of tree density (91.7%), dbh (92.3%), total tree height (82.8%), basal area (89.3%) and aboveground biomass (87.6%) compared to the observed attributes. These results suggest that the EDS model can provide reasonable capability in projecting growth dynamics of uneven-aged, mixed species sclerophyll forests.     

Reaction mechanism and pathway for the hydrothermal electrolysis of organic compounds

In this study, hydrothermal electrolysis experiments using glucose (a biorelated substance) as a starting material were carried out using a specially designed autoclave at 250°C. We could understand the fundamental reaction behavior of glucose under these conditions through various kinds of experiments and product analyses. Another series of experiments using pressurized CO₂ as an electrolyte was conducted to discover whether it is possible to use CO₂ as an alternative electrolyte to the conventional KCl electrolyte, with a view to lowering the environmental impact of the process. It was found that pressurized CO₂ was useful as an environmentally friendly electrolyte, although there were still some problems in terms of the reaction efficiency.     

生物质燃烧过程颗粒模型现状分析

生物质颗粒燃烧过程计算是生物质能利用、火灾过程分析及城市固体垃圾焚烧技术开发的基础。其计算结果的准确度取决于对所研究物理问题的数学模型是否正确。总结了生物质颗粒燃烧涉及的模型。对比了反应区域模型中面反应模型和体积反应模型,指出面反应模型适合计算传输控制过程,而体积反应模型适合计算动力控制或动力传输共同控制的过程。总结了干燥、热解、炭氧化等物理化学变化以及动量、热量和质量传递主要方程及方程中涉及的参数。结果表明,这些方程和参数差异显著,仍需实验研究辅助模型选取。     

Assessment of biomass residue availability and bioenergy yields in Ghana

Biomass is an important renewable energy source that holds large potential as feedstock for the production of different energy carriers in a context of sustainable development, peak oil and climate change. In developing countries, biomass already supplies the bulk of energy services and future use is expected to increase with more efficient applications, such as the production of biogas and liquid biofuels for cooking, transportation and the generation of power. The aim of this study is to establish the amount of Ghana's energy demand that can be satisfied by using the country's crop residues, animal manure, logging residues and municipal waste. The study finds that the technical potential of bioenergy from these sources is 96 PJ in 2700 Mm³ of biogas or 52 PJ in 2300 ML of cellulosic ethanol. The biogas potential is sufficient to replace more than a quarter of Ghana's present woodfuel use. If instead converted to cellulosic ethanol, the estimated potential is seven times the estimated 336 ML of biofuels needed to achieve the projected 10% biofuels blends at the national level in 2020. Utilizing the calculated potentials involves a large challenge in terms of infrastructure requirements, quantified to hundreds of thousands of small-scale plants.     

Instantaneous char reaction of biomass particles in a hot gas flow with fluctuating temperature

Char reaction is an important stage of the combustion processes of biomass particles. It dominates the burnout of biomass particles. The instantaneous char reaction processes of biomass particles in a hot gas with temperature fluctuation are studied. Two types of biomass fuels, i.e. pine and thistle, are chosen for the present investigation. The instantaneous mass variations of biomass particles with initial diameters of 100, 200, and 300 μm are calculated under different conditions. The gas temperature fluctuation leads to faster mass loss for both pine and thistle particles. The char reaction of biomass particles is further enhanced by increase in the fluctuation amplitude of gas temperature.