A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures

Fly and bottom ashes are the main by-products arising from the combustion of solid biomass. Since the production of energy from this source is increasing, the processing and disposal of the resulting ashes has become an environmental and economic issue. Such ashes are of interest as a construction material because they are composed of very fine particles similar to fillers normally employed in bituminous and cementitious mixtures. This research investigates the potential use of ash from biomass as filler in bituminous mixtures. The morphological, physical and chemical characteristics of 21 different ashes and two traditional fillers (calcium carbonate and “recovered” plant filler) were evaluated and discussed. Leaching tests, performed in order to quantify the release of pollutants, revealed that five ashes do not comply with the Italian environmental re-use limits. Experimental results show a wide range of values for almost all the investigated properties and a low correlation with biomass type in terms of origin and chemical composition. Furthermore, sieving and milling processes were found to improve the properties of the raw material in terms of grading and sample porosity. The effectiveness of these treatments and the low content of organic matter and harmful fines suggest that most of the biomass ashes investigated may be regarded as potential replacements for natural filler in bituminous mixtures.     

Long-term depletion of calcium and other nutrients in eastern US forests

Both harvest removal and leaching losses can deplete nutrient capital in forests, but their combined long-term effects have not been assessed previously. We estimated changes in total soil and biomass N, Ca, K, Mg, and P over 120 years from published data for a spruce-fir site in Maine, two northern hardwood sites in New Hampshire, central hardwood sites in Connecticut and Tennessee, and a loblolly pine site in Tennessee. For N, atmospheric inputs counterbalance the outputs, and there is little long-term change on most sites. For K, Mg, and P, the total pool may decrease by 2%–10% in 120 years depending on site and harvest intensity. For Ca, net leaching loss is 4–16 kg/ha/yr in mature forests, and whole-tree harvest removes 200–1100 kg/ha. Such leaching loss and harvest removal could reduce total soil and biomass Ca by 20%–60% in only 120 years. We estimated unmeasured Ca inputs from rock breakdown, root-zone deepening, and dry deposition; these should not be expected to make up the Ca deficit. Acid precipitation may be the cause of current high leaching of Ca. Although Ca deficiency does not generally occur now in acid forest soils, it seems likely if anthropogenic leaching and intensive harvest removal continue.     

National policies for biosphere greenhouse gas management: issues and opportunities

Biosphere greenhouse gas (GHG) management consists of preserving and enhancing terrestrial carbon pools and producing biomass as a fossil fuel substitute. The discussion of this topic has focused primarily on carbon-accounting and project-level issues, particularly relating to carbon sequestration as a source of emissions credits under the Kyoto Protocol. While international consensus on these matters is needed, this paper argues that an important domestic policy agenda also deserves attention. National policies for biosphere GHG management are necessary to bring about large-scale changes in land-use, forestry, and agricultural practices and can address some of the technical and policy issues that have proven to be particularly problematic from carbon-accounting and project-level perspectives. These policies should minimize land-use and resource-management conflicts, account for collateral benefits, and ensure institutional compatibility with existing resource-management regimes. Issues relating to project permanence, leakage, and transaction costs should also be addressed. A range of policy instruments should be used and biosphere GHG management should be one component of an integrated approach to environmental and resource management. Countries promoting biosphere GHG management as an important element of their climate change strategies should be developing these domestic policies to complement international negotiations and to demonstrate that carbon sequestration and biomass production can make an effective contribution to the stabilization of atmospheric GHG concentrations.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

Health and safety implications of alternative energy technologies. I. Geothermal and biomass

An evaluation of potential occupational and public health aspects of geopressure, hydrothermal, hot dry rock, silviculture, crop and animal residues, fermentable plant products, municipal waste, and plantation energy technologies has been performed. Future development of these energy options in the United States will contain hazards that could easily be eliminated by safer equipment design and common-sense attention to operation and maintenance. Occupational exposure to hydrogen sulfide gas occurs near all geothermal sites and wherever organic matter decomposes anaerobically. Respiratory damage has occurred to laborers in geothermal fields, while farm workers have been fatally overcome when employed near agitating liquid manure systems. However, the most frequent and severe of reported injuries to geothermal workers is dermal exposure to caustic sludges produced by H₂S abatement systems.Principal health and safety considerations of biomass pathways are directly related to the diffuse nature of solar energy fixation by photosynthesis and subsequent transfer to animal food chains. Since the potential fuel is in an unconcentrated form, cultivation, harvest, and transport are necessarily laborintensive. Thus, a significant potential for occupational injuries and fatalities exists. Of all biomass systems evaluated, direct burning of solid fuels presents the greatest public health risk. Data are presented to characterize the population at risk and the frequency and severity of injuries.Operated by Union Carbide Corporation under contract W-7405-eng-26 with the U.S. Department of Energy.     

Effect of ozone injection on the long-term performance and microbial community structure of a VOCs biofilter

For biofilters treating waste gases containing volatile organic compounds(VOCs), biomass accumulation is a common problem which will induce bed clogging and significant decrease in VOCs removal efficiency during long-term operation. In this study, ozone injection was developed as a biomass control strategy, and its effects on the biofilter performance and the microbial community structure were investigated in long-term operation. Two biofilters,identified as BF1 and BF2, were operated continuously for 160 days treating gaseous toluene under the same conditions, except that 200 mg/m3 ozone was continuously injected into BF1 during days 45–160. During the operation period, ozone injection did not change the toluene removal efficiency, while the pressure drop of BF1 with ozone injection was significantly lowered compared with BF2. The wet biomass accumulation rate of BF1 was 11 g/m~3/hr, which was only46% of that in BF2. According to the carbon balance result, ozone injection also increased the toluene mineralization rate from 83% to 91%, which could be an important reason for the low biomass accumulation. The PMA-q PCR result indicated that ozone injection increased the microbial viability of the biofilm. The high-throughput sequencing result also revealed that the dominant phyla and genera were not changed significantly by ozone injection, but some ozonetolerant genera such as Rhodanobacter, Dokdonella and Rhodococcus were enhanced by ozone exposure. All the results verified that ozone injection is capable of sustaining the long-term performance of biofilters by lowering the biomass accumulation, increasing the microbial viability and changing the microbial community structure.     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

Mg2+ improves biomass production from soybean wastewater using purple non-sulfur bacteria

Soybean wastewater was used to generate biomass resource by use of purple non-sulfur bacteria (PNSB). This study investigated the enhancement of PNSB cell accumulation in wastewater by Mg²⁺ under the light-anaerobic condition. Results showed that with the optimal Mg²⁺ dosage of 10 mg/L, biomass production was improved by 70% to 3630 mg/L, and biomass yield also was improved by 60%. Chemical Oxygen Demand (COD) removal reached above 86% and hydraulic retention time was shortened from 96 to 72 hr. The mechanism analysis indicated that Mg²⁺ could promote the content of bacteriochlorophyll in photosynthesis because Mg²⁺ is the bacteriochlorophyll active center, and thus improved adenosine triphosphate (ATP) production. An increase of ATP production enhanced the conversion of organic matter in wastewater into PNSB cell materials (biomass yield) and COD removal, leading to more biomass production. With 10 mg/L Mg²⁺, bacteriochlorophyll content and ATP production were improved by 60% and 33% respectively.     

The Influence of Varying Algal Biomass On Contaminant Exposure in Benthic-Planktonic Mesocosms: Copper (Ii)

A series of mesocosms was exposed to a suite of light treatments and nutrient enrichment in order to generate algal communities of varying biomass. the influence of this biomass on the speciation of copper (II) was studied. Distribution coefficients (_Kd,Lkg-1) were relatively high (log_Kd = 5 to 7), indicative of robust trace metal sequestration, and were likely controlled by the particulate organic carbon content (foc). Differences in _Kd over time and among treatments were significant, as was the relationship between _Kd and foc. Fluorescence quenching was used to determine binding capacities (_Lt, M) and their associated binding constants (_Kcond,M^-1) in order to model the solid phase copper speciation. the _Kcond ranged between 2.1 and 5.2 × 10¹²M^-1, indicating a very strong copper-ligand complex, and was higher in mesocosms that received more light. the light _Lt increased over time, dramatically after the nutrient enrichment, but did not vary systematically among light treatments. _Lt ranged from 7.2 × 10- 7 to 4.9 × 10- 5 M. the large magnitudes of _Kd, _Kcond and _Lt ensured that greater than 97% of total copper in the mesocosms was complexed by organic matter. the total copper concentration ([Cu]_T, M) needed to reach a target dissolved copper concentration of 10^-12.5 M (pCu = 12.5) was determined for each mesocosm over time. [Cu]_T was between 8.02 × 10^-5 and 3.41 × 10^-2 M, and increased over time. the [Cu]_T normalized to the target pCu (Effective Dose Ratio, EDR) increased directly with increases in algal biomass, indicating a direct link between system productivity and copper exposure. Approximately 45% of the variance in EDR was explained by variance in total biomass, while the residual variance in EDR was due likely to differences in the strengths of particle associations and magnitude of binding capacities.     

Climatic and genetic controls of yields of switchgrass, a model bioenergy species

The U.S. Renewable Fuel Standard calls for 136 billion liters of renewable fuels production by 2022. Switchgrass (Panicum virgatum L.) has emerged as a leading candidate to be developed as a bioenergy feedstock. To reach biofuel production goals in a sustainable manner, more information is needed to characterize potential production rates of switchgrass. We used switchgrass yield data and general additive models (GAMs) to model lowland and upland switchgrass yield as nonlinear functions of climate and environmental variables. We used the GAMs and a 39-year climate dataset to assess the spatio-temporal variability in switchgrass yield due to climate variables alone. Variables associated with fertilizer application, genetics, precipitation, and management practices were the most important for explaining variability in switchgrass yield. The relationship of switchgrass yield with climate variables was different for upland than lowland cultivars. The spatio-temporal analysis showed that considerable variability in switchgrass yields can occur due to climate variables alone. The highest switchgrass yields with the lowest variability occurred primarily in the Corn Belt region, suggesting that prime cropland regions are the best suited for a constant and high switchgrass biomass yield. Given that much lignocellulosic feedstock production will likely occur in regions with less suitable climates for agriculture, interannual variability in yields should be expected and incorporated into operational planning.