Distribution and Fractionation of Phosphorus,Cadmium, Nickel,and Lead in Calcareous Soils Amended with Composts

Abstract

Composts improve organic carbon content and nutrients of calcareous soils but the accumulation and distribution of phosphorus and heavy metals among various fractions in soil may vary under the south Florida conditions. The accumulation of P, Cd, Ni, and Pb with depth and the distribution of water soluble, exchangeable, carbonate, Fe–Mn oxides, organic and residual forms of each element were investigated in soils amended with municipal solid waste (MSW) compost, co-compost and biosolids compost and inorganic fertilizer (as control). Total concentrations of P, Cd, Ni, and Pb were higher in the 0–22 cm soil layers and decreased considerably in the rock layers. These elements were in the decreasing order of P ? Pb > Ni > Cd. Amounts of water soluble and exchangeable forms of P, Cd, Ni and Pb were negligible at 0–22 cm soil depths except for Cd in the 10–22 cm depth. Amending calcareous soil with either organic or inorganic amendments rendered phosphorus, nickle and lead in the residual form followed by Fe–Mn oxides form in the 0–10 and 10–22 cm soil layers. Cadmium was predominantly in the Fe–Mn oxides fraction followed by the residual and carbonate forms in both soil layers. A significant positive correlation was found between various organic carbon fractions and organic forms of P, Cd and Pb in the surface soil layer. Soil amended with MSW compost had higher concentration of Cd in the organic fraction whereas, co-compost and MSW compost amended soil had higher concentrations of organic Ni fraction in the 0–10 cm soil layer.     

Technological options for the management of biosolids

BACKGROUND, AIM, AND SCOPE: Large quantities of biosolids (sewage sludge), which are produced from municipal wastewater treatment, are ever-increasing because of the commissioning of new treatment plants and continuous upgrades of the existing facilities. A large proportion of biosolids are currently landfilled. With increasing pressure from regulators and the general public, landfilling of biosolids is being phased out in many countries because of potential secondary pollution caused by leachate and the emission of methane, a potent greenhouse gas. Biosolids contain nutrients and energy that can be used beneficially. Significant efforts have been made recently to develop new technologies to manage biosolids and make useful products from them. In this paper, we provide a review of the technologies in biosolids management. MATERIALS AND METHODS: A survey of literature was conducted. RESULTS: At present, the most common beneficial use of biosolids is agricultural land application because of inherent fertilizer values found in biosolids. Expansion of land application, however, may be limited in the future because of more stringent regulatory requirements and public concern about food chain contamination in some countries. Perceived as a green energy source, the combustion of biosolids has received renewed interest. Anaerobic digestion is generally a more effective method than incineration for energy recovery, and digested biosolids are suitable for further beneficial use through land application. Although conventional incineration systems for biosolid management generally consume more energy than they produce because of the high moisture content in the biosolids, it is expected that more combustion systems, either monocombustion or cocombustion, will be built to cope with the increasing quantity of biosolids. DISCUSSION: Under the increasingly popular low-carbon economy policy, biosolids may be recognized as a renewable fuel and be eligible for 'carbon credits'. Because ash can be used to manufacture construction materials, combustion can provide a complete management for biosolids. A number of advanced thermal conversion technologies (e.g., supercritical water oxidation process and pyrolysis) are under development for biosolids management with a goal to generate useful products, such as higher quality fuels and recovery of phosphorus. With an ever-increasing demand for renewable energy, growing bioenergy crops and forests using biosolids as a fertilizer and soil amendment can not only contribute to the low-carbon economy but also maximize the nutrient and carbon value of the biosolids. CONCLUSIONS: Land application of biosolids achieves a complete reuse of its nutrients and organic carbon at a relatively low cost. Therefore, land application should become a preferred management option where there is available land, the quality of biosolids meet regulatory requirements, and it is socially acceptable. Intensive energy cropping and forest production using biosolids can help us meet the ever-increasing demand for renewable energy, which can eliminate the contamination potential for food sources, a common social concern about land application of biosolids. In recent years, increasing numbers of national and local governments have adopted more stringent regulations toward biosolid management. Under such a political climate, biosolids producers will have to develop multireuse strategies for biosolids to avoid being caught because a single route management practice might be under pressure at a short notice. Conventional incineration systems for biosolids management generally consume more energy than they produce and, although by-products may be used in manufacturing, this process cannot be regarded as a beneficial use of biosolids. However, biosolids are likely to become a source of renewable energy and produce 'carbon credits' under the increasingly popular, low-carbon economy policy. RECOMMENDATIONS AND PERSPECTIVES: To manage biosolids in a sustainable manner, there is a need for further research in the following areas: achieving a higher degree of public understanding and acceptance for the beneficial use of biosolids, developing cost-efficient and effective thermal conversions for direct energy recovery from biosolids, advancing technology for phosphorus recovery, and selecting or breeding crops for efficient biofuel production.     

Multi-objective optimization of waste and resource management in industrial networks – Part II: Model application to the treatment of sewage sludge

In the present article, the thermal treatment of digested sewage sludge generated in the Swiss region of Zürich is modeled and optimized from an environmental perspective. The optimization problem is solved using a multi-objective mixed-integer linear program that combines material flow analysis, process models, life cycle assessment (LCA), and mathematical optimization techniques. The treatment options include co-incineration in municipal solid waste incineration, co-processing in cement production, and mono-incineration with the prospect of phosphorus recovery. The model is optimized according to six environmental objectives. Five of the six single-objective optimal solutions involve splits over the treatment options. The results reflect the available treatment capacities and other constraints, aspects rarely considered in conventional LCA studies. Co-processing in cement production is used to the maximum extent possible when minimizing impacts on climate change, human toxicity, fossil resource depletion, and fully aggregated impacts (ReCiPe H/A), whereas mono-incineration with phosphorus recovery receives the bulk of the sludge when optimizing for ecotoxicity and mineral resource depletion. Four of the single-objective optimal solutions (minimization of fossil energy resource depletion and contribution to climate change, human toxicity, and fully aggregated impacts) outperform the reference case over the six impact categories considered, showing that the current situation can be improved in some environmental categories without compromising others. The results of the sensitivity analysis indicate that assumptions regarding the product systems displaced by recovered by-products are critical for the outcome of the optimization. Our approach identifies in all of the cases solutions in which significant environmental improvements can be attained.     

Enhanced biological phosphorus removal using thermal alkaline hydrolyzed municipal wastewater biosolids

This study reports the feasibility of using municipal wastewater biosolids as an alternative carbon source for biological phosphorus removal. The biosolids were treated by a lowtemperature, thermal alkaline hydrolysis process patented by Lystek International Inc.(Cambridge, ON, Canada) to produce short-chain volatile fatty acids and other readily biodegradable organics. Two sequencing batch reactors(SBRs) were operated with synthetic volatile fatty acids(Syn VFA) and readily biodegradable organics produced from the alkaline hydrolysis of municipal wastewater biosolids(Lystek) as the carbon source, respectively.Municipal wastewaters with different strengths and COD:N:P ratios were tested in the study. The reactors' performances were compared with respect to nitrogen and phosphorus removal. It was observed that phosphorus removal efficiencies were between 98%–99% and 90%–97% and nitrogen removal efficiencies were 78%–81%, and 67% for the Syn VFA and Lystek, respectively. However, the kinetics for phosphorus release and uptake during the anaerobic and aerobic stages with Lystek were observed to be significantly lower than Syn VFA due to the presence of higher order VFAs(C4 and above) and other fermentable organics in the Lystek.     

The potential to increase soil carbon stocks through reduced tillage or organic material additions in England and Wales: A case study

Results from the UK were reviewed to quantify the impact on climate change mitigation of soil organic carbon (SOC) stocks as a result of (1) a change from conventional to less intensive tillage and (2) addition of organic materials including farm manures, digested biosolids, cereal straw, green manure and paper crumble. The average annual increase in SOC deriving from reduced tillage was 310 kg C ± 180 kg C ha⁻¹ yr⁻¹. Even this accumulation of C is unlikely to be achieved in the UK and northwest Europe because farmers practice rotational tillage. N₂O emissions may increase under reduced tillage, counteracting increases in SOC. Addition of biosolids increased SOC (in kg C ha⁻¹ yr⁻¹ t⁻¹ dry solids added) by on average 60 ± 20 (farm manures), 180 ± 24 (digested biosolids), 50 ± 15 (cereal straw), 60 ± 10 (green compost) and an estimated 60 (paper crumble). SOC accumulation declines in long-term experiments (>50 yr) with farm manure applications as a new equilibrium is approached. Biosolids are typically already applied to soil, so increases in SOC cannot be regarded as mitigation. Large increases in SOC were deduced for paper crumble (>6 t C ha⁻¹ yr⁻¹) but outweighed by N₂O emissions deriving from additional fertiliser. Compost offers genuine potential for mitigation because application replaces disposal to landfill; it also decreases N₂O emission.     

How the Toxics Use Reduction Act continues to promote clean production Internationally

The Massachusetts’ Toxics Use Reduction Act (TURA) of 1989 set an important milestone in the roadmap to Clean Production. The Act’s focus on a clear definition, methodology, and mandatory planning requirements have proved successful in getting companies in Massachusetts to reduce their use of toxic chemicals in manufacturing processes. Such results are inspirational for government officials and advocacy groups attempting to reduce toxic emissions in their communities and set progressive chemicals use policies. This paper will summarize three initiatives where TURA was a catalyst and continues to impact international chemicals policy: the Sewer Use By-law in Toronto, Canada; the European Union’s REACH chemicals legislation and the international campaign by Greenpeace in Asia and Latin America to achieve zero discharge of hazardous substances into rivers. The example of Toronto and REACH show how one or more essential aspects of TURA were incorporated into legislation. In the case of REACH TURA’s requirement of mandatory planning became an important example and NGO demand during the formation of Europe’s new chemicals regulation and resulted in the first substitution assessment planning requirement in EU wide legislation. Work is now ongoing to promote TURA type legislation in Latin America and Asia. However the ability to transfer the TURA framework to regions with inadequate government oversight and cheap disposal costs is seriously hampered. Although NGO campaigns in Asian and Latin America advocate zero discharge of hazardous emissions through toxics use reduction and elimination, much training and accountability will be needed within government and companies to understand the benefits of toxics use reduction and actually implement all or parts of the TURA framework. The Toxics Use Reduction Act came into force in 1989 with high environmental awareness, an engaged citizenry and a responsive government entity. Perhaps these are the same conditions that must exist for its successful transference to industrializing countries.     

Characterization of Fe-humic complexes in an Fe-enriched biosolid by-product of water treatment

The fertilizing potential of Fe-enriched biosolids has been attributed to Fe associations with humic substances contained therein. In this study, alkaline and near-neutral aqueous extractions of humic substances from an Fe-enriched biosolid were followed by gel chromatographic fractionation and characterization (CHNS elemental analysis; UV/visible and FTIR spectroscopy; FAAS analysis). The alkaline bulk humic extract had a strong fulvic character and Fe was predominantly associated with the higher molecular weight (50 000 Da) molecules, possibly including organic-coated Fe oxides from which Fe may be released more slowly. Under both near-neutral and alkaline conditions, associations with lower molecular weight humic molecules were also observed, indicative of the presence of Fe in more readily available forms. Thus the biosolid appears to have good short- and long-term fertilizing potential, particularly for alkaline, Fe-deficient soils.     

Easy and fast extraction methods to determine organochlorine pesticides in sewage sludge,soil, and water samples based at low temperature

Organochlorine pesticides present in sewage sludge can contaminate soil and water when they are used as either fertilizer or agricultural soil conditioner. In this study, the technique solid–liquid extraction with low temperature purification was optimized and validated for determination of ten organochlorine pesticides in sewage sludge and soil samples. Liquid–liquid extraction with low temperature purification was also validated for the same compounds in water. Analyses were performed by gas chromatography-mass spectrometry operating in the selective ion monitoring mode. After optimization, the methods showed recoveries between 70% and 115% with relative standard deviation lower than 13% for all target analytes in the three matrices. The linearity was demonstrated in the range of 20 to 70 µg L^?1, 0.5 to 60 µg L^?1, and 3 to 13 µg L^?1, for sludge, soil, and acetonitrile, respectively. The limit of quantification ranged between 2 and 40 µg kg^?1, 1 and 6 µg kg^?1, and 0.5 µg L^?1 for sludge, soil, and water, respectively. The methods were used in the study of pesticide lixiviation carried out in a poly vinyl chlorine column filled with soil, which had its surface layer mixed with sludge. The results showed that pesticides are not leached into soil, part of them is adsorbed by the sewage sludge (4–40%), and most pesticides are lost by volatilization.     

Effects of phytoextraction on heavy metal concentrations and pH of pore-water of biosolids determined using an in situ sampling technique

Heavy metal concentrations and pH of pore-water in contaminated substrates are important factors in controlling metal uptake by plants. We investigated the effects of phytoextraction on these properties in the solution phase of biosolids and diluted biosolids in a 12-month phytoextraction column experiment. Phytoextraction using Salix and Populus spp. temporarily decreased pore-water pH of the substrates over the experimental period followed by a return to initial pH conditions. Salix × reichardtii and Populus balsamifera effectively extracted Ni, Zn and Cd and actively mobilized these metals from the solid to the solution phase. S. × reichardtii had the stronger effect on mobilization of metals due to its larger root system. Phytoextraction did not affect Cu in the solution phase of the biosolids. Heavy metals were leached down to lower depths of the columns during the phytoextraction process.