Analysing countries’ contribution to climate change: scientific and policy-related choices

This paper evaluates the influence of different policy-related and scientific choices on the calculated regional contributions to global climate change (the “Brazilian Proposal”). Policy-related choices include the time period of emissions, the mix of greenhouse gases and different indicators of climate change impacts. The scientific choices include historical emissions and model representations of the climate system. We generated and compared results of several simple climate models. We find that the relative contributions of different nations to global climate change—from emissions of greenhouse gases alone—are quite robust, despite the varying model complexity and differences in calculated absolute changes. For the default calculations, the average calculated contributions to the global mean surface temperature increase in 2000 are about 40% from OECD, 14% from Eastern Europe and Former Soviet Union, 24% from Asia and 22% from Africa and Latin America. Policy-related choices, such as time period of emissions, climate change indicator and gas mix generally have larger influence on the results than scientific choices. More specifically, choosing a later attribution start date (1990 instead of 1890) for historical emissions, decreases the contributions of regions that started emitting early, such as the OECD countries by 6 percentage points, whereas it increases the contribution of late emitters such as Asia by 8 percentage points. However, only including the fossil CO₂ emissions instead of the emissions of all Kyoto gases (fossil and land use change), increases the OECD contributions by 21 percentage points and decreases the contribution of Asia by 14 percentage points.     

Chemical composition of rivers and streams in the forest and savanna zones of Nigeria

The aim of this study is to investigate the differences in the chemical conditions of lotic waterbodies in the two major ecosystems in Nigeria, the forest and savanna zones. The forest waters were slightly acidic (mean±SD pH = 6.72±0.58) while the savanna waters were slightly alkaline (pH = 7.11±0.33). The cationic order of dominance in the forest waters was Na⁺ > Ca²⁺ > Mg²⁺ > K⁺ in contrast to Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ in savanna waters. The forest waters were chlorided (typical of coastal and/or marine waters) whereas the savanna waters were carbonated in nature, typical of the worldwide freshwater. Organic carbon was significantly higher in forest waters than in the savanna waters (p < 0.05) while nutrient compounds were significantly higher in savanna waters than in forest waters. The seasonal variation of the chemical parameters was generally more evident in savanna than in forest waters. The differences in water quality between the two major vegetation zones reflect the differences in the biogeochemical processes and nutrient cycling that characterise forest and savanna ecosystems.     

Mapping Invasive Aquatic Vegetation in the Sacramento-San Joaquin Delta using Hyperspectral Imagery

The ecological and economic impacts associated with invasive species are of critical concern to land managers. The ability to map the extent and severity of invasions would be a valuable contribution to management decisions relating to control and monitoring efforts. We investigated the use of hyperspectral imagery for mapping invasive aquatic plant species in the Sacramento-San Joaquin Delta in the Central Valley of California, at two spatial scales. Sixty-four flightlines of HyMap hyperspectral imagery were acquired over the study region covering an area of 2,139 km² and field work was conducted to acquire GPS locations of target invasive species. We used spectral mixture analysis to classify two target invasive species; Brazilian waterweed (Egeria densa), a submerged invasive, and water hyacinth (Eichhornia crassipes), a floating emergent invasive. At the relatively fine spatial scale for five sites within the Delta (average size 51 ha) average classification accuracies were 93% for Brazilian waterweed and 73% for water hyacinth. However, at the coarser, Delta-wide scale (177,000 ha) these accuracy results were 29% for Brazilian waterweed and 65% for water hyacinth. The difference in accuracy is likely accounted for by the broad range in water turbidity and tide heights encountered across the Delta. These findings illustrate that hyperspectral imagery is a promising tool for discriminating target invasive species within the Sacramento-San Joaquin Delta waterways although more work is needed to develop classification tools that function under changing environmental conditions.     

Soil N balance as affected by soybean maturity class in the Guinea savanna of Nigeria

Legume–cereal rotation may reduce the fertilizer requirement of the cereal crop and we hypothesize that the benefit depends on the maturity class of the soybean. Field trials were therefore conducted in 1995 in four Guinea savanna sites to monitor the effect of soybean (Glycine max (L.) Merrill) cultivation on the N balance of the soil. In trial 1, an early (TGx1485-1D) and a late (TGx1670-1F) soybean were grown to maturity along with a maize (Zea mays L.) reference plot. In trial 2, six varieties of soybean (early: TGx1485-1D, TGx1805-2E and TGx1681-3F; medium: TGx1809-12E and TGx923-2E; late: TGx1670-1F) were grown to maturity along with a reference maize plot. The total nitrogen (N) content, aboveground N₂ fixed, and N remaining in the stover were higher in the medium and the late varieties than in early varieties. Also, the early varieties had higher nitrogen harvest indices (81–84%) than medium and late varieties (74–79%). From the N balance calculation, it was found that medium and late maturing soybean resulted in an addition of 4.2 kg N ha⁻¹ to the soil, whereas the early maturing varieties resulted in depletion of the soil N reserve by 5.6 kg N ha⁻¹ (P<0.05). On average, among the medium and late varieties, late maturing TGx923-2E resulted in an addition of 9.5 kg N ha⁻¹ to the soil. When the stover was not returned to the field, early soybean resulted in more negative N balance than the medium and late soybean (P<0.05). Therefore, planting an early variety of soybean for one season resulted in net depletion of soil N, even when the soybean residues were returned to the soil and N₂ fixed in the roots and N in the fallen leaf litter were included in the N balance calculations. Contrary to this, planting medium and late soybean for one season resulted in an addition of N to the soil. Therefore, medium and late soybean should be used as a preceding crop in legume–cereal rotation, if possible, to minimize or avoid depletion of soil N by early varieties of soybean.     

劈裂拉伸条件下大红山铜矿矿岩变形特性的试验研究

对大红山铜矿的3种岩石的试样进行了劈裂拉伸(巴西法)试验和单轴压缩试验,研究了岩石的变形特性。劈裂试验中在试样中部相互垂直的方向上粘贴了电阻应变计测量试样的变形。结果表明,在劈裂试验条件下,两种岩石均出现垂直于加载轴线方向所获得的拉伸弹模小于平行于加载轴线方向所获得的压缩弹模的现象。与单轴压缩下试样出现破裂、扩容的破坏特征相比,劈裂拉伸下试样的变形特征为接近峰值时变形曲线斜率会逐渐降低,达到峰值应力后则很快出现数值很大的拉伸变形,直至试样破坏。劈裂拉伸循环加卸载试验发现,大多数试样的拉伸卸载变形大于加载变形,致使残余变形的数值为负值,称之为反向残余变形。此现象与连续介质变形行为的预期不符,至今未见类似报道。反向残余变形是否具有普遍性及其影响,应该开展更多研究。     

Ensuring the service quality at a university construction technology laboratory in Brazil

Service quality in a construction technology laboratory can result in an improvement in construction companies’ competitiveness. This research aims to evaluate the service quality provided by a construction technology laboratory, specifically in the segment of performing testing through the rupturing of concrete samples. For this research, a survey was conducted using a structured questionnaire that was created based on a literature review regarding the surveying of laboratory customers at a university in the south of Brazil. Our research was both exploratory and quantitative, and the data were analyzed by applying multivariate data analysis. The conclusions of this study show that the dimensions of quality services are: communication, reliability, responsiveness, credibility, and tangibility. These five dimensions together provide a high explained variance standard of 79.75%. Having a suitable number of attendants available to serve customers and presenting agility in the construction laboratory is one of the managerial research contributions. Moreover, through information availability, this research generates greater traceability that can be used both by customers and by institutional management. Constantly and thoroughly monitoring the customer service cycle is another relevant factor that can improve the quality of the services provided.     

Energy efficiency and reduction of Co2 emissions through 2015: The Brazilian cement industry

The cement industry is characterisedby intensive energy consumption throughout itsproduction stages which, together with the calcinationof its raw materials, accounts for significant amountsof greenhouse gases (GHG) emissions. In 1996, theBrazilian cement industry consumed 4.3% of the energyrequired by the industrial sector, contributing over22 Tg (Teragrams) of CO₂. The prospects forgrowth in this sector in Brazil indicate risingdemands for fossil fuels, with a consequent upsurge inemissions. This article aims to present the prospectsfor energy conservation in the Brazilian cementindustry through to 2015, taking into account: theintroduction of new production technologies in thissector, the use of waste and low-grade fuels,cogeneration, the use of cementitious materials, andother measures, based on a technical and economicenergy demand simulation model. In all scenarios, wefound that is possible to significantly reduce energyconsumption and CO₂ emissions for BrazilianCement Industry. Under the market potential scenarios,energy savings vary between 1562.0 to 1900.6 PJ(PetaJoules), with use of cementitious materialsaccounting for around 31% of this total. Fortechnical potential scenarios, use of cementitiousmaterials could represent 51% to 52% of totalachieved energy savings, between 2374.6 to 2803.4 PJ.     

Rice mill waste as organic manure on a degraded Alfisol

In much of sub-Saharan Africa (SSA), the lack of organic soil amendments constitutes one of the principal causes for declining soil fertility in intensifying farming systems. The challenge, therefore, remains to increase the availability of organic inputs and to develop recommendations for their combination with inorganic fertilizers. An on-farm experiment was conducted in the northern Guinea savanna of Nigeria to evaluate the fertilizer effect of rice (Oryza sativa L.) mill waste (RMW) on a degraded Alfisol. The decomposition and nutrient (N and P) release patterns of RMW were studied using the litterbag technique, and the effect on maize yield and soil properties was determined. The RMW was applied at rates of 0, 5, 10, and 15 Mg DM ha⁻¹ and was applied either unburnt or burnt (farmers’ practice). In both years, compound fertilizer was broadcast during land preparation on all plots at rates of 40 kg N ha⁻¹, 17 kg P ha⁻¹, and 33 kg K ha⁻¹.Results obtained in the litterbag study showed that, at maize harvest, more than 90% of the P had been released from the decomposing RMW. However, around 60% of the organic C and 45% of the N still remained. Compared to the control treatment (0 Mg ha⁻¹ RMW), which yielded 0.55 Mg ha⁻¹, maize (Zea mays L.) grain yields were increased by 95% when 10 Mg ha⁻¹ of unburnt RMW was applied, and by 147% with 15 Mg ha⁻¹ (mean of 2 years). In contrast, burnt RMW did not result in significant yield increases. The cumulative application of 30 Mg ha⁻¹ of unburnt RMW significantly increased the soil organic carbon in the surface soil from 0.7% (0 Mg ha⁻¹ RMW) to 1.3%.The results of this investigation indicate that RMW constitutes a valuable organic input in the Guinea savanna if applied unburnt at rates of 10–15 Mg ha⁻¹ in combination with inorganic fertilizer. The repeated application of unburnt RMW may contribute to the rehabilitation of degraded soils through the buildup of soil organic matter.