沈阳市2000年环保工作目标及主要任务

在明确沈阳市 2 0 0 0年环保工作的指导思想后 ,着重就确保 2 0 0 0年“一控双达标”和“九五”计划目标的实现所确定的环保工作目标和为实现这一目标应完成的 10项工作任务作了较详尽地阐述。     

第三代移动通信技术在消防中的运用

移动通信网络技术、语音业务、宽带数据业务、规划与优化、管理与维护和新业务开放等方面技术日益成熟,功能日趋完善.本文通过对TD-SCDMA、WCDMA、CDMA2000三种不同的3G移动通信标准原理、终端、组网、业务、优化与规划等方面的比较,提出在消防通信领域运用第三代移动通信技术的具体方案.     

Mapping opportunities and challenges for rewilding in Europe

Farmland abandonment takes place across the world due to socio‐economic and ecological drivers. In Europe agricultural and environmental policies aim to prevent abandonment and halt ecological succession. Ecological rewilding has been recently proposed as an alternative strategy. We developed a framework to assess opportunities for rewilding across different dimensions of wilderness in Europe. We mapped artificial light, human accessibility based on transport infrastructure, proportion of harvested primary productivity (i.e., ecosystem productivity appropriated by humans through agriculture or forestry), and deviation from potential natural vegetation in areas projected to be abandoned by 2040. At the continental level, the levels of artificial light were low and the deviation from potential natural vegetation was high in areas of abandonment. The relative importance of wilderness metrics differed regionally and was strongly connected to local environmental and socio‐economic contexts. Large areas of projected abandonment were often located in or around Natura 2000 sites. Based on these results, we argue that management should be tailored to restore the aspects of wilderness that are lacking in each region. There are many remaining challenges regarding biodiversity in Europe, but megafauna species are already recovering. To further potentiate large‐scale rewilding, Natura 2000 management would need to incorporate rewilding approaches. Our framework can be applied to assessing rewilding opportunities and challenges in other world regions, and our results could guide redirection of subsidies to manage social‐ecological systems.     

AUSTAL2000在恶臭污染环境影响评估中的应用研究

运用德国AUSTAL2000模型对某化工项目周边400 km2的矩形区域和36个环境敏感点NH3、H2 S浓度和恶臭发生频率进行了模拟计算,分析了该项目恶臭污染的影响程度和范围,并对各排放源的计算结果进行了对比分析.结果表明,预测范围内NH3、H2 S只有小时浓度最大值超标,占标率分别为139%和120%,超标面积分别为0.16 km2和0.13 km2,但恶臭发生频率超标较严重,最大值达到了86.7%,超标面积达40.8 km2;环境敏感点NH3、H2 S浓度均未超标,恶臭发生频率也仅有两个点位的最大值略高于标准限值;与面源的无组织排放相比,采取排气筒的排放方式可以明显降低周边区域污染物浓度和恶臭发生频率,减少恶臭污染面积.     

超级爆炸喷涂镍基钴基涂层高温氧化及摩擦磨损性能

目的针对装备向高温高速发展的需求,开展NiCr-Cr_3C_2、CoMoCr及NiCr Al Y涂层的高温摩擦磨损性能对比研究。方法针对上述三种涂层,通过超级爆炸喷涂工艺进行涂层制备,并测试涂层孔隙率、显微硬度、结合强度等基本性能,开展650℃/260 h的抗氧化试验和400、650℃的销盘式摩擦磨损试验,对比涂层的各项性能和在高温条件下的氧化质量增量、摩擦系数、磨损质量损失。结果抗氧化试验后,NiCr-Cr_3C_2、CoMoCrSi及NiCrAlY涂层氧化增重0.18、0.1、0.005 mg/(cm~2·h)。650℃时,摩擦系数分别为0.5、1.0、0.6。结论超级爆炸喷涂工艺制备的涂层组织、结合强度均优于等离子喷涂等常规喷涂工艺。高温下的氧化产物Co_3O_4与Cr_2O_3对高温摩擦系数有不同的影响。NiCr-75Cr_3C_2和NiCrAlY涂层在400、650℃可作为与SG37A材料的对磨副材料。