Determining cadmium bioavailability in sediment profiles using diffusive gradients in thin films

Cadmium(Cd) uptake by plants or benthic organisms largely depends on its bioavailability in sediments,so it is necessary to understand Cd bio availability for determining its ecological risks in riverine sediments.Pore water is easily disturbed during sample collection,indicating that there was a shortage of traditional methods for investigating Cd bio availability.Here,sediment cores were collected from rivers,after which sequential extraction and diffusive gradients in thin films(DGT) method were employed to determine Cd potential bio availability in the sediments and pore water.We found that Cd concentrations measured by DGT were lower than that in pore water profiles,and Cd distribution in various fractions changed remarkably.Pearson correlation analysis showed significant positive correlations between Cd concentrations measured by DGT and total Cd concentrations(r~2=0.76),exchangeable and weak acid soluble fraction(r~2=0.68),ferromanganese fraction(r~2=0.72) and bound organic matter or oxidizable fraction(r~2=0.54).However,the correlation was relatively low between Cd concentrations measured by DGT and that in pore water profiles(r~2=0.26).These results demonstrated that DGT method could provide more accurate information of Cd bio availability in sediment profiles than traditional methods.     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake, Lake Taihu, China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 >DGT_0.78 >DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

薄膜干燥法再生聚苯乙烯树脂的研究

利用溶剂溶解回收的聚苯乙烯塑料,将其涂布于不锈钢传送带上,以水蒸气为加热介质,经薄膜干燥法获得再生聚苯乙烯树脂.再生的聚苯乙烯树脂性能优异,溶剂回收率达97%以上.     

GIS支持下的上海市工业源SO2污染研究

以MapInfo地理信息系统软件为平台,集成空气污染扩散模式,对上海城市工业源的分布、SO2排放及其污染扩散影响进行了多方案的计算分析,比较了污染源集中的工业区和不同类型的污染源对环境空气质量的贡献。根据对年日浓度的计算分析,发现大型高架源的污染排放决定了城市SO2浓度场的基本分布,空间上工业分布集聚的一些老工业区是城市建成区中多个高浓度中心的主要贡献者。     

漂珠为载体TiO_2/SiO_2膜的制备及性能研究

以漂珠为载体,探索采用液相沉积法制备TiO2/SiO2膜最佳条件。在自制的光催化反应器中,在相同的条件下,以酸性嫩黄和难处理的焦化废水为目标降解物,做了TiO2/SiO2和TiO2两种膜的光催化氧化对比试验。结果表明,与单一TiO2膜比较,以漂珠为载体,采用液相沉积法制备的TiO2/SiO2改性膜具有较高的光催化氧化性能。     

Photocatalytic degradation of organochlorine compounds using TiO2 supported on fiberglass cloth

The feasibility of photocatalytic degradation of organochlorine compounds using TiO₂ supported on fiberglass cloth as a photocatalyst was studied. The results showed that 2.0×10^-4 mol/dm³ of dichloroethylene, trichloroethylene and tetrachloroethylene can be completely photocatalytically degraded within a short time under illumination with a 375W medium pressure mercury lamp. The effects of parameters such as illumination time, initial concentration of organochlorine compounds, amount of air flow and concentration of H₂O₂ on the photocatalytic degradation were investigated. The TiO₂ supported on the fiberglass was not easily detached and after 500h illumination there was no significant loss of photocatalytic activity of TiO₂. The passible mechanisms of photocatalytic degradation were discussed.     

Photocatalytic degradation of organochlorine compounds using TiO2 supported on fiberglass cloth

１ＩｎｔｒｏｄｕｃｔｉｏｎＯｒｇａｎｏｃｈｌｏｒｉｎｅｃｏｍｐｏｕｎｄｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｖａｒｉｏｕｓｉｎｄｕｓｔｒｉｅｓ，ａｎｄｈａｖｅｂｅｎｒｅｐｏｒｔｅｄｔｏｃｏｎｔａｍｉｎａｔｅｒｕｎｎｉｎｇｗａｔｅｒ，ｒｉｖｅｒｓ，ｌａｋｅｓ...     

薄壁圆筒工件抛物面型缩口成形的力学分析

应用适用于板料轴对称成形过程的应力平衡方程对薄壁圆筒工件抛物面型缩口成形中的应力进行了分析 ,得出了薄壁圆筒工件抛物面型缩口成形时的经向应力与各种参数之间的关系及缩口力的计算公式 ,从而为工艺设计人员制定此类缩口工艺提供了方便     

空心玻璃微球附载TiO2清除水面漂浮的油层

以空心玻璃微球为载体，采用浸涂法制备出ＴｉＯ２／ｂｅａｄｓ光催化剂．研究了利用ＴｉＯ２／ｂｅａｄｓ光催化剂降解水面漂浮的正十二烷及甲苯的可行性．结果表明，３７５Ｗ中压汞灯照射１２０ｍｉｎ，正十二烷的光催化去除率达９３．５％，光照８０ｍｉｎ时甲苯被完全光催化去除；通入空气有利于正二十烷及甲苯的光催化去除，外加微量的Ｈ２Ｏ２（５．０ｍｍｏｌ／Ｌ）可大大提高光催化去除率，向反应液中加入少量Ｎａ＋对正十二烷及甲苯的光催化去除率无明显的影响．     

用胶片生产中的含铝废渣生产高效净水剂聚合氯化铝的研究

介绍了利用胶片生产中含铝废渣生产高效净水剂聚合氯化铝的工艺技术路线。结果表明 ,该产品技术指标符合国家标准 ,且生产过程具有工艺简单、投资少 ,不产生二次污染等特点。