Contrasting responses of seed yield to elevated carbon dioxide under field conditions within Phaseolus vulgaris

The rising concentration of carbon dioxide [CO₂] in the atmosphere represents an increase in a growth-limiting resource for C₃ crop species. Identification of lines or characteristics of lines which have superior yield at elevated [CO₂] could aid in adaptation to this global change. While intraspecific variation in responses to elevated [CO₂] has been found in several species, intraspecific differences in crop yield responses to elevated [CO₂] under field conditions have seldom been documented. In this 4-year study, the responses of photosynthesis, growth, pod number, seed number and size, and seed yield to the elevation of [CO₂] to 180 μmol mol⁻¹ above the current ambient concentration were examined in four varieties of Phaseolus vulgaris in the field, using open-top chambers. There was a significant variety by [CO₂] interaction for seed yield, with seed yield at elevated [CO₂] ranging from 0.89 to 1.39 times that at ambient [CO₂] (mean 1.17×) in the different varieties, when averaged over 4 years. The highest yielding variety at elevated [CO₂] was not the highest yielding variety at ambient [CO₂]. The varieties with the largest and smallest yield responses both had an indeterminate growth habit. Down-regulation of photosynthesis at elevated [CO₂] only occurred in the two indeterminate varieties, and there was no significant correlation between the response of single leaf photosynthetic rate and the response of seed yield to elevated [CO₂] among varieties, nor between the responses of stem mass and seed yield. The change in the number of pods at elevated [CO₂] was the primary determinant of the response of seed yield. These results indicate that significant variation in the response of seed yield to elevated [CO₂] under field conditions does exist among varieties of P. vulgaris, and that variation in the response of pod and seed number may be more important than variation in photosynthetic response.     

丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯的合成与螯合性能研究

用2,3-二羟基苯甲酸经羟基保护、酰胺化、酯化和去保护4步反应,生成一种新型的四齿丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体.采用傅里叶变换红外光谱(FT-IR)、紫外-可见光谱(UV-Vis)、核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)和质谱(MS)对其结构进行了表征.在中性pH值条件下,研究了这种配体对铀酰离子的络合能力.结果表明,丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体与铀酰离子的螯合常数为23.2.     

NaOH溶液吸收CO2的试验研究

为了满足国际海事组织对船舶CO2排放的要求,建立了一种针对船舶尾气CO2的循环吸收系统,利用NaOH溶液吸收CO2.NaOH溶液完成第一步吸收反应后在第二步反应中被还原,从而可以循环利用.分析了初始反应温度、NaOH浓度及溶液中的Na2CO3对CO2吸收率的影响,并计算了循环反应中NaOH的再生率和CaO的过量系数.结果表明,CaO过量系数为1.2时对CO2固化效果最佳,此时NaOH溶液再生率达79.31％.研究表明,NaOH溶液吸收船舶尾气中CO2的循环系统效率高、成本低.     

The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.     

玉米叶吸附剂对水溶液中Pb2+的吸附性能研究

研究了玉米叶对水溶液中Pb2+的吸附性能,借助正交和单因素试验探讨各因素对吸附率的影响,利用红外光谱研究吸附机理,并采用Langmuir、Freundlich和Temkin模型对吸附数据进行拟合.结果表明:金属初始质量浓度和体系pH值是影响吸附的重要因素;玉米叶吸附铅离子的最佳pH值为5.0,金属质量浓度和吸附剂投加量最佳比值为80 mg/L:0.170 g,在25℃时玉米叶对铅离子的吸附较快,180min后达到吸附平衡;吸附数据更加符合Freundlich和Temkin等温吸附模型,由Langmuir等温吸附模型可知玉米叶最大吸附量为103.266mg/g,吉布斯自由能△Ge为负值,该过程吸热且自发进行.红外光谱分析表明,参与作用的官能团为羟基、羧基、酰胺或脂肪族C-x(x代表Cl、Br、I).     

Investigation of Nanoparticle Additives to Biodiesel for Improvement of the Performance and Exhaust Emissions in a Compression Ignition Engine

Worldwide energy demand has been growing steadily during the past five decades and most experts believe that this trend will continue to rise. The amount of emitted harmful emission gases increases in parallel with increasing energy consumption. This increase has forced many countries to take various precautions, and various restrictions on emitted emissions have been carried. In this study, effects of addition of oxygen containing nanoparticle additives to biodiesel on fuel properties and effects on diesel engine performance and exhaust emissions were investigated. Two different nanoparticle additives, namely MgO and SiO₂, were added to biodiesel at the addition dosage of 25 and 50 ppm. Fuel properties, engine performance, and exhaust emission characteristics of obtained modified fuels were examined. As a result of this study, engine emission values NO_x and CO were decreased and engine performance values slightly increased with the addition of nanoparticle additives.     

氨三乙酸酐改性纤维素对Cd~(2+)的吸附性能

本实验采用氨三乙酸酐改性玉米秸秆纤维素和苎麻纤维素,制备了两种改性纤维素吸附剂NTAA-CS及NTAA-RF,并研究了这两种吸附剂对水中Cd2+的吸附性能.通过元素分析、FTIR及SEM分析发现,纤维材料表面成功引入了氨三乙酸分子中的酯键和氨基基团.在改性纤维素吸附剂投加量为2 g·L-1,Cd2+的初始浓度为200 mg·L-1,p H值为4.0时,NTAA-CS和NTAA-RF对Cd2+的去除率分别为82.6%和90.2%.吸附实验结果表明:改性纤维素吸附剂对Cd2+的吸附是一个快速过程,吸附的最佳p H范围为4.0~7.0.吸附等温线用Langmuir方程的拟合效果优于Freundlich方程.经过5次吸附再生,吸附剂仍可以保持较大的吸附容量.这些结果表明,NTAA-CS和NTAA-RF在去除重金属废水中有较大的应用前景.     

基于LCA的北京市公交车节能及温室气体减排潜力分析

新能源公交车是未来城市公交行业节能及温室气体减排的重点发展方向.新能源公交车在行驶阶段具有良好的节能及温室气体减排效果,而汽车制造、能源生产等相关生命周期阶段的能耗及温室气体排放常被忽视,且目前新能源公交车的乘客运载功能相对较弱,可能对节能及温室气体减排的潜力造成较为显著的影响.因此,本文基于北京市公交车的运营特征,采用生命周期评价(LCA)方法,选择客运周转量作为功能单位,核算了天然气公交车、混合动力公交车和纯电动公交车等新能源公交车相对于柴油公交车的节能及温室气体减排效益.结果表明:发展新能源公交车对促进北京市公交行业及城市节能低碳发展具有积极的作用,但相对于基于运营里程的核算结果,本研究新能源公交车节能及温室气体减排潜力均较低,主要原因是新能源公交车的实际载客量相对较低;混合动力公交车和纯电动公交车在空调开启时的节能潜力与温室气体减排潜力均远低于天然气公交车;通过发展情景分析,建议北京市现阶段应优先发展天然气公交车,适当发展纯电动公交车和混合动力公交车,以减少北京市公交车的总体能耗,同时降低温室气体排放强度.     

BiOCl/TiO_2复合材料的可见光活性及机理研究

采用水热法和溶胶凝胶法制备新型BiOCl/TiO2复合材料并明确了最优的掺杂比例(2%).随后利用X射线衍射(XRD)、紫外可见漫反射(DRS)、透射电镜(TEM)和X射线光电子能谱(XPS)对该材料进行表征.由于禁带宽度较大,纯BiOCl和TiO2的可见光催化性能极差,然而二者复合后,同条件下的苯降解率却大幅提升,可以达到40%以上.经证实,催化剂制备过程中,Bi的状态发生变化,在TiO2导、价带之间插入新的能级,使其禁带宽度变窄,电子可以实现可见光跃迁.     

基于BP神经网络优化制备Cu-Ce/TiO_2及其光催化活性研究

采用Cu和Ce对TiO2进行改性,基于正交实验设计和BP神经网络研究了Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数、Cu-Ce/TiO2中CuCe摩尔比及Cu-Ce/TiO2烧结温度对Cu-Ce/TiO2光催化降解甲醛溶液性能的影响.同时,对Cu-Ce/TiO2制备方案进行了优化,并运用X射线衍射仪、扫描电子显微镜和紫外-可见分光光度计对最佳条件下制备的Cu-Ce/TiO2进行表征.结果表明,优化的制备条件为Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数为2.88%,Cu-Ce/TiO2中Cu-Ce的摩尔比为1∶1,Cu-Ce/TiO2的烧结温度为570℃.共掺杂Cu离子和Ce离子能有效避免掺杂TiO2晶格内部表层和近表层产生较多的位错,从而抑制晶格畸变增大;诱导TiO2中锐钛矿型晶体向金红石型晶体转变的能力增强,有效抑制电子-空穴对的复合,产生介电局域效应.