微曝气Fenton氧化法处理模拟双酚A废水的效果及其生物验证

研究了微曝气Fenton氧化法关键工艺参数对模拟双酚A（BPA）废水处理效果的影响,并从活性污泥性质和污染物去除率两方面,采用膜生物反应器(membrane bioreactor, MBR)对微曝气Fenton氧化法的处理效果进行了实验验证,为实现BPA废水的生物处理奠定基础。结果表明,初始pH值、反应时间、H₂O₂/COD(质量浓度比)、H₂O₂/Fe²⁺ (摩尔浓度比)、反应温度及曝气量均对预处理效果有较大影响,在最佳条件下,COD去除率可达70%,BOD/COD值则由原废水的0.02提高到0.50以上。MBR处理上述出水的结果表明,经微曝气Fenton氧化处理BPA的废水,可较好地适应后续的生化处理。     

太阳光Fenton法处理垃圾渗滤液中有机污染物

研究利用太阳光Fenton法处理垃圾渗滤液。根据太阳光辐射强度随时间的变化规律,选择重庆7、8月份的晴天,在中午12：00到下午14：00时进行试验,研究太阳光辐射时间、pH值、Fenton试剂用量对垃圾渗滤液COD去除率的影响。研究结果表明：太阳光Fenton法对垃圾渗滤液的COD有较好的去除效果,COD去除率达86.2%。太阳光Fenton法处理垃圾渗滤液的优化条件是：日光辐射时间为120 min,pH值为2.5,Fe²⁺浓度为5 mmol/L,H₂O₂浓度为570 mmol/L。同时,论文还对太阳光Fenton法处理垃圾渗滤液的动力学进行分析。研究结果显示：太阳光Fenton法处理垃圾渗滤液,其表观动力学方程为-dC/dt=2.6×10^-8×P^1.92×F^1.79×E^1.67。     

活性炭在焦化废水深度处理中的应用研究

采用活性炭对焦化废水生化处理系统的外排水进行深度处理,实验研究了不同因素对废水COD的去除情况.结果表明,不需其他工艺辅助,仅在1 g/L的活性炭吸附20 min后即可将废水COD降到110 mg/L,出水无色澄清,符合排放要求.     

湿地植物根际微生物处理生活污水的模型规模研究

在人工湿地模型中,研究了人为增加湿地植物根际微生物对生活污水中COD的降解效果:将2株从湿地分离的根际微生物扩增培养(分别用于模型1与模型2),与一定比例的生活污水混合后注入到湿地模型中,在停留12,24,36,48 h时分别测定污水中COD的去除率.结果表明,加菌模型对COD的去除率显著高于空白模型(P<0.05),且随着时间的延长,二者的差异性越大,至48 h时,空白模型和2个加菌模型(模型1和模型2)对自然污水COD的去除率分别为50.6%,73.0%,75.3%,对灭菌污水COD的去除率分别为52.2%,76.3%,80.1%.说明向人工湿地中添加植物根际微生物将大大提高湿地对生活污水中COD的去除率,具有进一步开发的价值.     

浅谈TOC与CODCr的关系

介绍了TOC和CODCr的含义,比较了TOC与CODCr测定方法、使用仪器的不同和各自的优缺点,并从理论上和实际水样测定中论述了TOC和CODCr的相关性。对于不同的废水,TOC 与CODCr的相关性不一样,必须先实验求出二者之间的关系。     

Impact of Bioaugmentation with a Consortium of Bacteria on the Remediation of Wastewater-Containing Hydrocarbons (5 pp)

Goals, Scope and Background It has been observed that hydrocarbon treated wastewaters still contain high COD and a number of intermediates. This suggests that the required catabolic gene pool for further degradation might be absent in the system or, that its titer value is not significant enough. By providing the desired catabolic potential, the overall efficiency of the treatment system can be improved. This study aims to demonstrate this concept by bioaugmentation of a lab-scale reactor treating refinery wastewater with a consortium having the capacity to complement the alkB genotype to the available microbial population. Methods Two reactors were set up using activated biomass collected from a refinery treatment plant and operated at a continuous mode for a period of 8 weeks. The feed to both reactors was kept constant. Crude oil was spiked regularly. One reactor was bioaugmented with a consortium previously described for crude oil spill remediation. The efficiency of the bioaugmented reactor was demonstrated by reduced COD. The changes in the microbial population over a period of time were analyzed by RAPD. Catabolic activity of the biomass in both reactors was monitored by PCR. The presence of the catabolic loci was confirmed by Southern Hybridization. Results and Discussion 52.2% removal of COD was observed in the bioaugmented reactor while only 15.1% reduction of COD was observed in the reactor without bioaugmentation. The change in microbial population can be seen from the 4th week, which also corresponds to improved catabolic activity. The presence of the bedA locus was seen in all samples, which indicates the presence of aromatic degraders, but the appearance of the alkB locus, from the 6th week onwards, which was observed only in the samples from the bioaugmented reactor. The results suggest that the gene pool of the bioaugmented reactor has catabolic loci that can degrade accumulated intermediates, thus improving the efficiency of the system. Conclusions In this study, improvement of efficiency of bioremediation was demonstrated by addition of catabolic loci that are responsible for degradation. Bioaugmentation was carried out in biomass that was collected from an ETP (effluent treatment plant) treating hydrocarbon containing wastewater to study the strategies for improvement of the treatment system. Biostimulation, only marginally improved the efficiency, when compared to bioaugmentation. The improved efficiency was demonstrated by COD removal. The presence of the alkB locus suggests the importance of a catabolic gene pool that acts on accumulated intermediates. It is well documented that straight chain aliphatics and intermediates of aromatic compounds after ring cleavage, accumulate in refinery wastewater systems, thereby hindering further degradation of the wastewater. Supplementation of a catabolic gene pool that treats the lower pathway compounds and alkanes will improve the overall efficiency. In this study, results suggest that the alkB locus can also be used to monitor the degradative mode of the activated biomass. Recommendations and Perspective . Pollution from petroleum and petroleum products around the globe are known to have grave consequences on the environment. Bioremediation, using activated sludge, is one option for the treatment of such wastes. Effluent treatment plants are usually unable to completely degrade the wastewater being treated in the biological unit (the aerator chambers). The efficiency of degradation can be improved by biostimulation and bioaugmentation. This study demonstrates the improved efficiency of a treatment system for wastewater containing hydrocarbons by bioaugmentation of a consortium that supports degradation. Further experiments on a pilot scale are recommended to assess the use of bioaugmentation on a large scale. The use of molecular tools, like DNA probes for alkB, to monitor the system also needs to be explored.     

天然硅藻土作为吸附材料处理渗滤液的效果研究

利用天然硅藻土在静态条件下对垃圾渗滤液中的氨氮和COD的吸附效果进行了研究。结果表明：天然硅藻土对于氨氮的去除效率只有14．1％;但对COD的去除效率可以达到70．1％;天然硅藻土对于COD的饱和吸附量和吸附速度明显高于其对氨氮的饱和吸附量及吸附速度;在平衡浓度相当高的情况下,每克硅藻土具有吸附65．31mg COD的极限潜力。     

pH值、硫酸根和温度对钢管管垢中铬释放的影响

以市政供水管网钢管管垢为研究对象,将垢层由外向内分为表层、硬壳层和疏松多孔层.利用SEM、BET、XRD、XPS和分形态提取等技术对预吸附Cr(Ⅵ)前后的各层管垢进行表征和分析,并探究了pH值、SO₄^2-浓度和温度对各层管垢中Cr释放的影响.结果显示,钢管各层管垢的主要成分均为α-FeOOH,吸附性能排序为表层>疏松多孔层>硬壳层,管垢中铁元素大多以三价和二价形式存在,具有一定还原性.Cr(Ⅵ)通过物理和化学吸附富集于管垢,主要以铁锰氧化物结合态存在,表层管垢富集量最大.酸性环境、SO₄^2-浓度和温度的升高均会促进Cr的释放.强酸性条件下表层Cr释放浓度为中性条件下的2.76倍;SO₄^2-浓度增加使各层管垢的Cr释放量增加0.1～0.4倍;温度升高20℃,表层管垢的Cr释放量增加26.74%.     

高氯低COD值水样的无汞快速测定法

以硝酸银和硫酸铬钾代替硫酸汞来消除 COD 测定中的氯离子干扰,同时将重铬酸钾溶液的浓度降低为0.100 mol／L,并用硫磷混酸代替硫酸,该方法经过对标准样品和实际样品的测定,表现出对于测定氯离子含量低于25000 mg／L的高氯低 COD 值水样具有较好的准确度和精密度,同时可以实现银盐的回收再利用。     

模拟阳光下Ag／I-TiO2光催化预处理山核桃加工废水

研究了在模拟太阳光下,采用银修饰的碘掺杂二氧化钛光催化剂（Ag／I—TiO2）对某食品厂山核桃加工废水进行光催化预处理的效果。结合x射线衍射（XRD）、比表面积分析（BET）、紫外-可见漫反射光谱（uV—Vis）的表征结果,来分析催化剂结构对于废水处理效果的影响。探讨了Ag含量、废水初始pH（pHi）和光照时间等因素对化学需氧量（COD）去除及水质可生化性（B／C）提高的影响。并得出适宜的反应参数为：3％Ag含量;pHi为6;光照时间为240min。在最佳条件下,COD去除率45％,废水B／C比由0．17上升到0．31。光催化氧化法能够有效降低山核桃加工废水的COD含量,并达到显著提高废水可生化性的目的。