有机污染土壤异位直接热脱附装置节能降耗方案

以异位直接热脱附技术的原理、适用范围、工艺流程、优缺点等为基础,建立了输入、输出能量平衡关系式并进行了热平衡计算;针对该工艺能耗过高的问题,分析了系统各部分能耗,提出了节能降耗方案。通过烟气热回用装置,将二燃室后高温烟气余热能量经循环管道输送给土壤预干燥装置,将有机污染土壤含水率降低,从而减少系统总能耗。结果表明：经过热力计算,土壤水分预干燥量越大,系统节能效果越好;烟气余热足够用于土壤预干燥减少17%左右土壤水分的要求。通过土壤预干燥装置将土壤水分从20%降低到15%,可使直接热脱附装置降低能耗20%以上。     

蒸发塔技术用于脱硫废水的处理

脱硫废水水质复杂、含有重金属,处理难度很大,为此开发了一种新型的脱硫废水处理技术——蒸发塔技术,可以实现脱硫废水的零排放。在实验室搭建了小型蒸发塔实验台,对脱硫废水的蒸发特性、热量衡算进行了研究。研究表明：导流板角度一定的情况下,脱硫废水主蒸发区在塔体中心位置,随着脱硫废水处理量的增加,主蒸发区域向塔壁和塔体下部偏移;导流板角度减小,高温区下移;雾矩受给液量和雾化器转速的双重影响,给液量越大,雾矩越大,转速越大,雾矩越小;塔径一定的条件下,适当调节进风量和导流板角度可增加脱硫废水的处理量;模拟计算表明,蒸发系统抽取热烟气量较少,不会对电厂热系统产生明显影响。     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

基于复式记账的土地资源资产核算与报表编制研究

借鉴会计学复式记账核算的优点,在国际资源核算体系的基础上,根据我国自然资源资产核算需求,提出土地资源资产核算的复式记账体系和报表编制框架。研究认为,基于复式记账的土地资源资产核算和报表编制要以“摸清家底、反映自然资源负债、提供土地资源审计和绩效考核信息”为目标,明确区、县级自然资源局为土地资源资产受托管理和进行土地资源资产核算与报表编制的核算单位。在界定土地资源资产、负债和权益相关概念的基础上,提出土地资源资产属性变化的核算内容和每次土地资源资产实物量变化必须遵循占补平衡的基本原则,进行过程核算。以YC县土地资源资产变化为例,对土地资源资产变化进行了基于复式记账的土地资源资产核算与报表编制实证研究,确定核算的事项类型和特征及其借贷核算流程,编制出土地资源资产负债表,并同时进行实物量核算和价值量核算的报表编制,结果表明:YC县土地资源资产实物量1485 km^2,2018年末价值量5639874.22万元、经济权益5271874.22万元、生态权益367991.6万元,土地资源负债8.40万元,通过土地资源资产用途调整,土地资源资产价值量增加21319.42万元,但在调整过程中,形成了土地资源负债0.07 km^2(8.4万元),在以后土地整治中需要增加园地。     

中国自然资源资产负债表编制及运用的关键问题

完善的自然资源资产负债表编制体系,能为国家和各级政府摸清“家底”,进行宏观经济管理、资源配置等工作提供重要的数据信息。党的十八届三中全会提出探索编制自然资源资产负债表之后,与此相关的理论研究迅速增加,但针对自然资源资产负债表编制和运用的理论与实践仍存在一些模糊认识;诸如自然资源负债等难以确定的问题。着眼于此,本文对我国自然资源资产负债表的编制现状进行了认真的思考,总结出自然资源资产负债表编制和运用的六个关键问题,即对国际规范SEEA2012和SNA2008的认识问题,对以县级单位为起点的编制主体的认识问题,对单式和复式表格根本区别的认识问题,对实物量和价值量转换难点的认识问题,对自然资源资产负债表信息渠道与平台建设的认识问题,对自然资源资产负债表编制中各部门权责关系的认识问题。以此为基础,本文从国际做法和国内实践两个角度进行了分析,并提出了本文观点:编制和运用自然资源资产负债表,应全面理解、充分借鉴SEEA2012和SNA2008的国际规范;确立以县级及以下政府层级为起点的编制主体;转变为“从单式到复式”的编表思路,坚持使用复式表格;迈出实物量向价值量转化的重要一步,重视价值量核算;建设自然资源数据收集的信息渠道与平台;处理好自然资源资产负债表编制中各部门间的权责关系。本文研究有利于推进自然资源资产负债表编制与运用工作,发挥自然资源资产负债表在我国的生态文明建设中的重要作用。     

Radon, helium and CO2 measurements in soils overlying a former exploited oilfield, Pechelbronn district, Bas-Rhin, France

The Pechelbronn oilfield (Rhine Graben, France), where mining activity ended in the 1960s, has been used for waste disposal for twenty years. Since the wastes are varied, work is underway to identify the discharged materials and their derivatives, as well as to locate and quantify potential discharge sites. Two major goals were assigned to the present work. The first was to identify or refine the location of hidden structures that could facilitate gas emanation up to the surface, by studying soil gas concentrations (mainly ²²²Rn, CO₂, CH₄ and helium) and carbon isotope ratios in the CO₂ phase. The second was devoted to examining, from a health and safety viewpoint, if the use of the oilfield as a waste disposal site might have led to enhanced or modified gas emanation throughout the area.It appeared that CO₂ and ²²²Rn evolution in the whole area were similar, except near some of the faults and fractures that are known through surface mapping and underground observations. These ²²²Rn and CO₂ anomalies made it possible to highlight more emissive zones that are either related to main faults or to secondary fractures acting as migration pathways. In that sense, the CO₂ phase can be used to evaluate ²²²Rn activities distant from tectonic structures but can lead to erroneous evaluations near to gas migration pathways. Dumping of wastes, as well as oil residues, did not appear to have a strong influence on soil gaseous species and emanation. Similarly, enhanced gas migration due to underground galleries and exploitation wells has not been established. Carbon isotope ratios suggested a balance of biological phenomena, despite the high CO₂ contents reached. Other monitored gaseous species (N₂, Ar, H₂ and alkanes), when detected, always showed amounts close to those found subsurface and/or in atmospheric gases.     

The impact of natural and anthropogenic hydrocarbons on the tropospheric budget of carbon monoxide

A method to quantify the relative contributions of surface sources and photochemical production of atmospheric carbon monoxide has been implemented in a three-dimensional chemical-transport model. The impact of biogenic and anthropogenic hydrocarbons has been calculated. The oxidation of isoprene contributes to about 10% of the global tropospheric burden of carbon monoxide, with a maximum contribution over southern America and Africa. Oxidation of methane and terpenes contribute to 28 and 2%, respectively, of the tropospheric burden of CO. The oxidation of the other hydrocarbons, which include ethane, propane, ethylene, propylene and the surrogate hydrocarbon representing other hydrocarbons results in 12% of the CO tropospheric burden, among which 69% results from the oxidation of hydrocarbons of biologic origin. The overall global CO yield from the oxidation of isoprene is estimated to be 23% on a carbon basis. Comparisons between model results and the few available observations of isoprene, terpenes and their oxidation products show that there is no evidence that the current global isoprene emissions proposed in the IGAC/GEIA emissions data base are substantially overestimated, as suggested by previous studies.     

Biospheric influence on carbon dioxide measurements in Italy

The study concerning carbon dioxide measurements taken during the 1997, 1998 and 1999 summer campaigns at two different altitude stations and biospheric conditions are presented. The higher station (Mt. Cimone, 2165 m a.s.l.) is characterised by 360° free horizon and is located on a rocky mountain while the lower (Ninfa lake, 1550 m a.s.l.) is located inside the red spruce and beech forest. The different behaviour of CO₂ at the two mountain stations has been registered. It shows the strong effect of nighttime soil emission and vegetation respiration on CO₂ mixing ratio increases and of diurnal vegetative activity on CO₂ concentration decreases at the lower measurement site. The baseline character of the higher measurement site has been confirmed by comparison of CO₂ diurnal amplitudes recorded at the two stations.     

曝气策略对膜面剪切力的影响机制及其优化

曝气冲刷是浸没式MBR工艺不同于常规活性污泥法工艺的关键特征,然而现行规范的曝气系统设计与运行比较粗放,缺乏气泡尺寸模拟优化方法。以可直接观测的工程规模 (500 m³·d⁻¹) 膜生物反应器为研究对象,对穿孔管角度进行了优化研究,并用群体平衡模型(Population Balance Model,PBM)模型模拟污泥混合液不同粘度下的内部气泡分布情况。结果表明：穿孔管角度垂直向下、60°、45°、30°、垂直向上在膜面产生的平均剪切力分别为1.74、1.46、1.19、1.38、1.67 Pa,这表明曝气角度最优为垂直向下。0.3%、0.5%和0.8%浓度的羧甲基纤维素钠(Carboxymethyl cellulose, CMC)下产生的平均剪切力分别是1.51、1.92、2.24 Pa,气泡直径逐渐增大。且气泡尺寸越大、流速越大,分布越均匀。基于0.3%、0.5% CMC的速度实验结果与 PBM模拟结果基本吻合。该研究结果可为MBR技术的工艺优化和系统控制方法提升提供参考。     

Compostability of Poly(lactide): Degradation in an Inert Solid Medium

Commercial poly(lactide) degradation was studied in an inert solid medium simulating compost conditions, with the aim to achieve a complete carbon balance of the polymer degradation. The mineralisation rate at the end of the test was compared to those obtained for poly(lactide) degradation in compost. It was shown that the mineralisation rate after 45 days of degradation was quite lower in inert solid medium than in compost but the standard deviation of data was enhanced. A protocol for both extraction and quantification of the carbon included in the different degradation by-products was proposed and the carbon balance of the polymer degradation was followed during the test with a satisfactory accuracy. The non-degraded PLA material was recovered during the test, hence the evolution of the glass transition temperature and the molecular weight was followed. A two-step degradation mechanism was highlighted in inert solid medium, showing the fundamental role of abiotic reactions for PLA degradation in compost.