Reducing the risk level for pipelines transporting carbon dioxide and hydrogen by means of optimal safety valves spacing

In many countries where electricity generation is based on their natural resources of fossil fuels a need arises to implement new power engineering technologies that allow carbon dioxide capture. Simultaneously, efforts are made to find new energy carriers which, if fired, do not involve carbon dioxide emissions. Hydrogen is one of such fuels with this future potential which is now becoming increasingly popular. Obviously, this means that the two gases mentioned above – carbon dioxide and hydrogen – will be produced in large quantities in future, which in many cases will necessitate their transport over considerable distances. If a pipeline failure occurs, the transport of the gases may pose a serious hazard to people in the immediate vicinity of the leakage site. This paper presents an analysis of the possibility of reducing the level of risk related to pipelines transporting CO₂ and H₂ by means of safety valves. It is shown that for a 50 km long and a 0.4 m diameter pipeline transporting gas with the pressure of 15 MPa the individual risk level can be reduced from 1·10⁻⁴ to 6.5·10⁻⁷ for CO₂ and from 1·10⁻⁶ to 6·10⁻¹⁰ for H₂. The social risk can be diminished in similar proportions.     

Enhanced U(VI) bioreduction by alginate-immobilized uranium-reducing bacteria in the presence of carbon nanotubes and anthraquinone-2,6-disulfonate

Uranium-reducing bacteria were immobilized with sodium alginate, anthraquinone-2, 6-disulfonate (AQDS), and carbon nanotubes (CNTs). The effects of different AQDS-CNTs contents, U(IV) concentrations, and metal ions on U(IV) reduction by immobilized beads were examined. Over 97.5% U(VI) (20 mg/L) was removed in 8 hr when the beads were added to 0.7% AQDS-CNTs, which was higher than that without AQDS-CNTs. This result may be attributed to the enhanced electron transfer by AQDS and CNTs. The reduction of U(VI) occurred at initial U(VI) concentrations of 10 to 100 mg/L and increased with increasing AQDS-CNT content from 0.1% to 1%. The presence of Fe(III), Cu(II) and Mn(II) slightly increased U(VI) reduction, whereas Cr(VI), Ni(II), Pb(II), and Zn(II) significantly inhibited U(VI) reduction. After eight successive incubation-washing cycles or 8 hr of retention time (HRT) for 48 hr of continuous operation, the removal efficiency of uranium was above 90% and 92%, respectively. The results indicate that the AQDS-CNT/AL/cell beads are suitable for the treatment of uranium-containing wastewaters.     

Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), elemental(CHN) analysis, Fourier transform infrared(FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO_2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO_2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO_2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO_2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO_2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

基于变更平衡表的土地利用演化信息提取与预测方法研究——以苏州市为例

变更平衡表为国土资源管理部门历年实地调查、汇总所得,精度高,目前的研究中对其深入的应用较少,基于变更平衡表的应用方法研究可为区域土地利用演变信息提取与预测提供帮助。推导了由连续年份的年度变更平衡表求多年周期的平衡表的方法,提出了基于土地利用综合动态度分析土地利用有序程度的思路,探讨了利用连续年份的变更平衡表预测任意年份土地利用结构的方法,并基于传统方法进行了改进,提出了利用矩阵开方法求预测概率矩阵。应用苏州市一定时期的连续年份的年度变更平衡表对上述方法进行了验证,结果表明:提出的信息提取方法有效,预测结果可信;在分析期内(1998~2008年),苏州市耕地大量减少的去向是各类建设用地增加的来源,区域土地利用有序程度较高;预测显示至2020年土地利用结构变化仍将维持农用地、耕地不断减少和建设用地总量不断增加的趋势,但转化的速率将有所放缓;对变更平衡表的深入应用有一定的借鉴意义。     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

关于焦化行业CO2排放核算方法的探讨

本文分析了适用于焦化行业通用CO₂排放核算方法,在此基础上结合我国焦化行业工艺和原料的特征,采用排放因子法和物料衡算法等两种方法对10家典型焦化企业CO₂排放进行核算。结果表明:物料衡算法能很好地反映不同类型焦化企业的排放特征;排放因子法对我国独立焦化企业存在碳排放量系统性高估的可能。为此,建议我国焦化企业可借鉴德国焦化企业的碳核算经验,采用碳平衡法对不同类型的焦化企业(单元)的碳排放量进行核算,并完善相关的统计和监测技术。     

Vegetation and carbon sequestration and their relation to water resources in an inland river basin of Northwest China

In the Heihe River Basin in the arid inland area of northwest China, the distribution of water resources in vegetation landscape zones controls the ecosystems. The carbon sequestration capacity of vegetation is analyzed in relation to water resources and vegetation growing conditions. During the last 20 years, the vegetation ecosystems have degenerated in the Heihe River Basin. Simulation using the C-FIX model indicates that, at present, the total amount of NPP of vegetation accounts for about 18.16 TgC, and the average value is 106 gC/m(2)/yr over the whole basin. NPP has generally the highest value in the upperstream mountain area, middlestream artificial oases area, downstream river bank area, alluvial fan and the terminal lake depression where vegetation grows relatively well. The lowest value is found in the vast downstream desert and Gobi area. Protection of vegetation ecosystems and enhancement of carbon sequestration require such inland river basins as the Heihe River Basin to be brought under management in a comprehensive way, taking water as a key, to carry out a rational and efficient allocation and utilization of water resources.     

Removal of Se(IV) from aqueous solution using sulphuric acid-treated peanut shell

A carbonaceous sorbent was prepared from peanut shell via sulphuric acid treatment. Se(IV) removal from aqueous solution on the sorbent was studied varying time, pH, Se(IV) concentration, temperature and sorbent status (wet and dry). Se(IV) removal was faster using the wet sorbent than the dry sorbent following a pseudo-first-order model. Se(IV) removal increases at low pH values, and decreases as pH increases until pH 7. Sorption was found to fit the Langmuir equation and sorption capacity for the wet sorbent was higher than that for the dry one. Both sorbents showed an increased selenium sorption by rising the temperature. Redox processes between Se(IV) and the carbon sorbent are involved. Analysis by scanning electron microscope and X-ray powder diffraction for the sorbent after the reaction with acidified Se(IV) confirmed the availability of elemental selenium as particles on the sorbent surface as a result of Se(IV) reduction. Physicochemical tests showed an increase in sorbent acidity, cation exchange capacity (CEC) and surface functionality after the reaction with acidified Se(IV), indicating the oxidation processes occurring on the sorbent surface. Due to its reduction properties, the sorbent seems efficient for Se(IV) removal from aqueous solution.     

Wood carbon content of tree species in Eastern China: interspecific variability and the importance of the volatile fraction

Data on the mass density and carbon content of tree organs, and in particular stem wood, are essential for accurate assessments of forest carbon sequestration. However most available data, including that for East Asia, has neglected the volatile C fraction. Wood samples were collected and assayed for C content from 14 native tree species in Jilin Province, NE China. C content showed statistically significant variation among species, ranging from 48.4% to 51.0%. The volatile C fraction was non-negligible, averaging 2.2%, and showed high variation among species. As found in prior studies, wood C content was appreciably higher in conifer than hardwood (angiosperm) species (50.8+/-0.1% vs. 49.5+/-0.2%, respectively). Wood carbon density (gC/cm(3)) showed very high inter-specific variation, due mainly to differences in wood specific gravity. Our analyses, in conjunction with recently published data from North America, indicate a global mean value of 47.5+/-0.5% wood C content exclusive of volatile C; the widely used 50% figure corresponds more closely to total wood C inclusive of the volatile fraction. Failure to include volatile C or to use species- or higher-taxon-specific C content values in forest C assessments is likely to introduce biases on the order approximately 4-6%. In addition, the stocks and flows of the volatile C fraction in wood are in themselves an important and sorely neglected aspect of forest C processes likely to be strongly impacted by harvests and other management practices.