The effects of climate warming on microbe-mediated mechanisms of sediment carbon emission

Due to significant differences in biotic and abiotic properties of soils compared to those of sediments, the predicted underlying microbe-mediated mechanisms of soil carbon emissions in response to warming may not be applicable for estimating similar emissions from inland water sediments. We addressed this issue by incubating different types of sediments, (including lake, small river, and pond sediments) collected from 36 sites across the Yangtze River basin, under short-term experimental warming to explore the effects of climate warming on sediment carbon emission and the underlying microbe-mediated mechanisms. Our results indicated that under climate warming CO₂ emissions were affected more than CH₄ emissions, and that pond sediments may yield a greater relative contribution of CO₂ to total carbon emissions than lake and river sediments. Warming-induced CO₂ and CH₄ increases involve different microbe-mediated mechanisms; Warming-induced sediment CO₂ emissions were predicted to be directly positively driven by microbial community network modularity, which was significantly negatively affected by the quality and quantity of organic carbon and warming-induced variations in dissolved oxygen, Conversely, warming-induced sediment CH₄ emissions were predicted to be directly positively driven by microbial community network complexity, which was significantly negatively affected by warming-induced variations in pH. Our findings suggest that biotic and abiotic drivers for sediment CO₂ and CH₄ emissions in response to climate warming should be considered separately when predicting sediment organic carbon decomposition dynamics resulting from climate change.     

Modeling carbon sequestration under zero-tillage at the regional scale. II. The influence of crop rotation and soil type

For policy decisions with respect to CO₂-mitigation measures in the agricultural sector, national and regional estimations of the efficiency of such measures are required. The conversion of ploughed cropland to zero-tillage is discussed as an option to reduce CO₂ emissions and promises at the same time effective soil and water conservation. Based on the upscaling of simulation results with the soil and land resources information system SLISYS-BW, estimations of CO₂-mitigation rates in relation to crop rotations and soil type have been made for the state of Baden-Württemberg (Germany). The results indicate considerable differences in the CO₂-mitigation rates between crop rotations ranging from 0.48 to 0.03 Mg C ha⁻¹ a⁻¹ for winter cereals–spring cereals–rape rotations and winter cereals–spring cereals–corn silage rotations, respectively. The efficiency of the crop rotations is strongly related to the total carbon input and in particular the amount of crop residues. Among the considered soil types, highest CO₂-mitigation rates are associated with Cumulic Anthrosols (0.62 Mg C ha⁻¹ a⁻¹) and the lowest with Gleysols (−0.01 Mg C ha⁻¹ a⁻¹). An agricultural extensification scenario with conventional plowing but conversion of the presently applied intensive crop rotations to a clover–clover–winter cereals rotation indicated a CO₂-mitigation potential of 466 Gg C a⁻¹. However, the present high market prices for cereals and increasing demand for energy production from biomass encourages an intensification of the agricultural production and an excessive removal of biomass which in future will seriously reduce the potential for carbon sequestration on cropland.     

Experimental study on the suppression of gas explosion using the gas–solid suppressant of CO2/ABC powder

Gas explosion is the leading accident in underground coal mining in China. Using the self-improved 20 L spherical experimental system, the impacts of 8% CO₂, ABC powder at various concentrations and mixture of them on the suppression of mine gas explosion were investigated. The results indicate that cooperative synergism exists between ABC powder and CO₂. Their combination has a better effect than each of the two components acting alone, especially for the gas of larger concentration. When 0.25 g/L ABC powder was mixed with 8% CO₂, the explosion limits were reduced by about 55%, the time to reach the peak explosion pressure was prolonged 3.56 times on average. Meanwhile, the maximum explosion pressure declined on an average of 59.4% and the maximum explosion overpressure rising rate decreased on an average of 91.1%. A combination of 0.20 g/L ABC powder and 8% CO₂ completely suppressed 11% gas explosion. The explosion suppression mechanism of CO₂ and ABC powder were probed theoretically. CO₂ plays a key part in the whole explosion processes, and it can effectively suppress the forward reaction between gas and oxygen. While it is during the middle-later period of explosion processes that ABC powder plays a critical role. The particles decomposed from heated ABC powder such as nitrogen and phosphor will react with free radicals rapidly. Besides, atoms as N, P are capable of participating in chain reaction and reacting with active groups, significantly suppressing the gas explosion.     

Power system planning with emission constraints: Effects of CCS retrofitting

Today, the world's energy needs are still supplied mainly from fossil fuel based resources. This is true for electricity generation as well, thus making the power sector responsible for 45% of greenhouse gas emissions. The present climate crisis has made it necessary to minimise emissions in power generation, with low-carbon energy sources taking on greater significance in recent years. However, most low-carbon sources have inherent problems, like intermittency and high capital expenditure. A suitable alternative is carbon capture and storage (CCS) technology which allows continued fossil fuel-based electricity generation at much lower rates of emission. Two approaches are possible in the deployment of CCS technology. The first is to introduce new power plants equipped for carbon dioxide (CO₂) capture, while systematically shutting down existing coal power plants. Another is to retrofit existing power plants for CO₂ capture. These approaches are compared in this work. The study shows that allowing CCS retrofitting of existing power plants can reduce the overall cost requirement significantly. In addition, a sensitivity analysis is also done to study the effect of nuclear energy on the overall energy mix.     

Non-equilibrium phenomena in carbon dioxide expansion

Release of liquid and supercritical carbon dioxide is a fundamental research topic in CCS. Traditional approach is largely based on HEM and, in general, assumes equilibrium from the outlet to the Mach disc. Experimental results have shown that this approach is not always effective in describing the expansion phenomenon; therefore a significant lack of knowledge exists about CO₂ properties at the under-expanded jet zone boundary, which is a main focus in process safety. Here, solid formation, vapour quality, sonic velocity and final temperature are generally calculated according to equilibrium saturation condition, and this is generally incorrect. This article deals with non-equilibrium thermodynamics of liquid and supercritical CO₂ expansion, illustrating relaxation dynamics through the HRM models, and discussing the very specific singularities of CO₂ phase transitions, vapour to liquid and liquid to solid, that result away from the equilibrium condition, due to the rapid phase changes and to the specific properties of CO₂ multi phase thermodynamics, including nucleation and particle growth. Statistical rate theory has been applied with the aim at identifying the phase transition energy barrier, resulting in a significant entropy increase. A case study based on HEM conservation equations integrated with the statistical rate approach has been presented, which covers the gap of the equilibrium hypothesis. The objective of the article is to provide a more accurate method to predict the properties of carbon dioxide following an expansion.     

A risk assessment methodology for high pressure CO2 pipelines using integral consequence modelling

This paper presents a risk assessment methodology for high pressure CO₂ pipelines developed at the Health and Safety Laboratory (HSL) as part of the EU FP7 CO2Pipehaz project. Until recently, risk assessment of dense phase and supercritical CO₂ pipelines has been problematic because of the lack of suitable source term and integral consequence models that handle the complex behaviour of CO₂ appropriately. The risk assessment presented uses Phast, a commercially available source term and dispersion model that has been recently updated to handle the effects of solid CO₂. A test case pipeline was input to Phast and dispersion footprints to different levels of harm (dangerous toxic load and probit values) were obtained for a set of pipeline specific scenarios. HSL's risk assessment tool QuickRisk was then used to calculate the individual and societal risk surrounding the pipeline. Knowledge gaps that were encountered such as: harm criteria, failure rates and release scenarios were identified and are discussed.     

蒸汽吞吐生产过程中CO产出超标原因分析 ——以红山油田为例

针对红山油田蒸汽吞吐生产过程中一氧化碳产出浓度超标的问题,开展了实验研 究,分析了反应温度、水油质量比、反应时间、储层矿物等因素对于一氧化碳产出浓度 的影响。结果表明:反应温度的升高、水油比的减少、反应时间的减少均会使一氧化碳 产出浓度上升,但造成红山油田生产过程中一氧化碳产出浓度超标的主要原因是红山油 田地层岩石矿物对水气转换反应的催化能力不足,加入对水气转换反应具有催化能力的 药剂可以降低一氧化碳产出浓度。     

紧急避险设施内一氧化碳气体吸附性能研究

紧急避险设施作为灾变情况下为井下人员提供安全避险的密闭空间,要求能够对空间内部的有毒有害气体进行及时处理。针对井下密闭空间内部一氧化碳气体的吸附处理问题,采用北京科技大学避险技术研究中心的地面模拟救生舱作为实验平台,以实验为基本手段,对两种药剂A、B在不同药剂量、风量的情况下进行去除效率的对比实验,并测定环境湿度对药剂性能的影响,确定一氧化碳药剂的最佳吸附条件,以达到提高去除效率的目的。最终得出药剂A以全风量条件下4kg时吸附效果为最佳,药剂B以全风量条件下8kg时吸附效果为最佳,湿度对一氧化碳药剂的吸附效率有显著影响,需配合干燥剂使用。     

Inter-annual variability of ecosystem production in boreal jack pine forests (1975-2004) estimated from tree-ring data using CBM-CFS3

We describe and apply a method of using tree-ring data and an ecosystem model to reconstruct past annual rates of ecosystem production. Annual data on merchantable wood volume increment and mortality obtained by dendrochronological stand reconstruction were used as input to the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3) to estimate net ecosystem production (NEP), net primary production (NPP), and heterotrophic respiration (Rh) annually from 1975 to 2004 at 10 boreal jack pine (Pinus banksiana Lamb.) stands in Saskatchewan and Manitoba, Canada. From 1975 (when sites aged 41-60 years) to 2004 (when they aged 70-89 years), all sites were moderate C sinks except during some warmer than average years where estimated Rh increased. Across all sites and years, estimated annual NEP averaged 57 g Cm⁻² yr⁻¹ (range −31 to 176 g Cm⁻² yr⁻¹), NPP 244 g Cm⁻² yr⁻¹ (147-376 g Cm⁻² yr⁻¹), and Rh 187 g Cm⁻² yr⁻¹ (124-270 g Cm⁻² yr⁻¹). Across all sites, NPP was related to stand age and density, which are proxies for successional changes in leaf area. Regionally, warm spring temperature increased NPP and defoliation by jack pine budworm 1 year previously reduced NPP. Our estimates of NPP, Rh, and NEP were plausible when compared to regional eddy covariance and carbon stock measurements. Inter-annual variability in ecosystem productivity contributes uncertainty to inventory-based assessments of regional forest C budgets that use yield curves predicting averaged growth over time. Our method could expand the spatial and temporal coverage of annual forest productivity estimates, providing additional data for the development of empirical models accounting for factors not presently considered by these models.