光电化学法处理水体中腐殖酸的初步研究

结合９０年代欧美学者提出了高级化学氧化过程（Ａｄｖａｎｃｅｄｃｈｅｍｉｃａｌｏｘｉｄａｔｉｏｎｐｒｏｃｅｓｓ，ＡＯＰ）原理，提出了并建立了一套光电化学联用的新用于处理难以生物降解的腐殖酸废水，实验表明，在通电１ｈ加光条件下（Ｉ＝０．２Ａ）总有碳（ＴＯＣ）去除率达到９０％，色度去除率达到９５％。     

航空装备腐蚀维护维修新材料研究进展

针对海洋环境下服役航空装备极易发生腐蚀的问题,介绍了清洗剂、去腐蚀产物膏、缓蚀剂等腐蚀维护维修新材料的研究进展,包括功能、分类、技术指标等。清洗剂用于航空装备的日常清洗、维护以及维修,去除油污等污染物,防止腐蚀;去腐蚀产物膏用于外场航空装备腐蚀产物的原位去除;缓蚀剂用于在不能对现役航空装备的防护体系进行大幅改动的情况下,针对海洋环境下航空装备的防腐蚀需求,对航空装备进行附加防护或临时防护。综合运用腐蚀维护维修新材料进行航空装备的腐蚀防护,可以预防和减少腐蚀的发生,及时对腐蚀部位进行修复,保障航空装备的使用性能和战斗力。     

Decomplexation of Cu-1-hydroxyethylidene-1,1-diphosphonic acid by a three-dimensional electrolysis system with activated biochar as particle electrodes

The feasibility of decomplexation removal of typical contaminants in electroplating wastewater, complexed Cu(II) with 1-hydroxyethylidene-1,1-diphosphonic acid (Cu-HEDP), was first performed by a three-dimensional electric reactor with activated biochar as particle electrodes. For the case of 50 mg/L Cu-HEDP, Cu(II) removal (90.7%) and PO initial pH 7, acid-treated almond shell biochar (AASB) addition 20 g/L, and reaction time 180 min, with second-order rate constants of 1.10 × 10⁻³ and 1.94 × 10⁻⁵ min⁻¹respectively. The growing chelating effect between Cu(II) and HEDP and the comprehensive actions of adsorptive accumulation, direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP, even though the mineralization of HEDP was mainly dependent on anode oxidation. The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction, especially acidic carboxylic groups and quinones on particle electrodes, which decreased from 446.74 to 291.48 µmol/g, and 377.55 to 247.71 µmol/g, respectively. Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H₂O₂ and reactive oxygen species (e.g., •OH), a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.     

宜万铁路某隧道溶腔段帷幕注浆施工技术

应用帷幕注浆施工方法处理宜万铁路某隧道溶腔,根据现场地质条件提出了具体的施工方案、工艺要点及施工方法,并对注浆参数、注浆工艺流程、注浆材料、注浆设备、注浆施工过程和注浆控制标准等     

过滤式碳纤维电极消毒效果比较与机理研究

过滤式电极消毒作为一种安全、高效的新型消毒技术备受关注,然而目前使用的电极材料比较单一,且稳定性和高效性难以兼备,制约了该技术的设备化发展.本文采用过滤式消毒方式,考察了几种高孔隙率的导电碳纤维毡的消毒效果.结果表明,碳纤维毡电极具有优异的消毒能力,活性碳纤维电极可在几伏的电压下使细菌死亡,与传统电化学消毒相比,电压降低了1~2个数量级.其中A-PCF(聚丙烯腈基活性碳纤维)电极在外接电压2 V,水力停留时间2 s时即可对大肠杆菌菌液实现6.5log的去除.当外接电压≤2 V时,流出物中未检测到氯,pH保持不变,排除了电化学产物的影响.A-PCF可作为过滤式电极消毒的优选电极材料.     

Enzyme-electrolytic degradation of dichloromethane: Efficiency, kinetics and mechanism

Enzymatic electrolysis cell(EEC) has advantages over microbial electrolysis cell(MEC) due to the needless of microbe inoculation and high-efficiency of enzymatic reaction. In this study, an EEC was first applied to achieve the effective degradation of halogenated organic pollutants and dichloromethane(CH_2Cl_2) was utilized as a model pollutant. The results indicate that the degradation efficiency of CH_2Cl_2 after 2 hr reaction in the EEC was almost100%, which was significantly higher than that with enzyme(51.1%) or current(19.0%). The current induced the continuous regeneration of reduced glutathione(GSH), thus CH_2Cl_2 was degraded under the catalysis of GSH-dependent dehalogenase through stepwise dechlorination, and successively formed monochloromethane(CH_3Cl) and methane(CH_4). The kinetic result shows that with a current of 15 mA, the maximum specific degradation rate of CH_2Cl_2(3.77 × 10~(-3) hr~(-1)) was increased by 5.7 times. The optimum condition for CH_2Cl_2 dechlorination was also obtained with pH, current and temperature of 7.0, 15 mA and 35°C,respectively. Importantly, this study helps to understand the behavior of enzymes and the fate of halogenated organic pollutants with EEC, providing a possible treatment technology for halogenated organic pollutants.     

长寿命BOD微生物传感器的研究

本研究将从淀粉厂活性污泥中分离筛选出的一种性能优良的腊状芽孢杆菌(Bacillus Cereus)用高分子等材料包埋制成薄膜,与氧电极组合成BOD传感器。经对其技术性能进行测试表明,间断使用寿命已达16个月以上;对BOD标准物质线性响应范围5—60mg/L;响应时间不大于8min;测定环境标样平均误差1％,变异系数5.1;与BOD_5经典法同步测定废水样品结果相关性良好。     

水泥行业二氧化碳排放统计——以贵阳市为例

本文从水泥行业二氧化碳的排放统计出发,研究二氧化碳排放的重要影响因素、二氧化碳排放的指标体系,从而得出一套水泥行业二氧化碳排放统计的核算方法.以贵阳市为例,从三种不同活动水平的统计数据对水泥行业生产工艺过程中产生的CO2排放量进行估算比较,验证统计核算方法的有效性,为贵阳市乃至全国水泥行业CO2的减排提供一个可行的科学依据.     

高浓度制药废水处理技术的研发及应用

制药废水组成复杂,污染物浓度高,污水CODcr浓度达10000mg/l,含有大量有毒、有害物质。本中采用催化氧化预处理+水解酸化+UASB+接触氧化+炭滤吸附的工艺流程,通过改善细部参数及改良配套设备设计,提高了各单元去除效率,降低了能耗及处理成本,出水CODcr浓度达到污水综合排放标准.     

电絮凝去除废水中多种重金属影响因素研究

目的以铁作为电极,研究电絮凝法处理含多种重金属废水的影响因素及效果。方法通过控制pH、停留时间、电流密度、电导率、废水初始浓度等因素至不同水平,考察处理效果、能耗及极板消耗的变化。结果随着停留时间、pH值及电流密度的升高,处理效果越好,但升高至一定程度后,处理效果提升并不明显;电导率对处理效果影响并不显著,但过低的电导率会增加能耗;废水初始浓度越高,要达到处理目标所需的能耗及极板消耗均越高。结论当pH为8.5~9.0、进水电导率为1500~2000μs/cm、停留时间为3~4 min、废水初始质量浓度20 mg/L、电流密度为13.2~19.8 A/m2时,处理效果最理想,对总铜、总镍、总铅、总锌、总镉及总铬的去除率达到99%以上,且能耗与极板消耗均为最低,电絮凝法更适合于重金属废水的深度处理。