Residence and place image

Data are presented for a particular population on its perception of English and Welsh local authority areas in terms of desirability for residence. The method employed permits a distinction between positive and negative judgements as well as a measure of the differing degree to which areas figure in the mind at all. It is established that the areas are seen in terms of a sharply differentiated hierarchy of preference and that there is considerable variation in the extent to which areas are “visible”. In aggregate negative judgements predominate and the most frequently expressed attitude is strong dislike. Places in the south‐west are popular as are some places in the north. London Boroughs are unpopular although in varying degrees. The most favoured place is Cornwall and the least favoured is Wolverhampton. It is argued that perceptions studied in the “direct” way used here are important to complement those employing an “oblique” method in which criteria of choice are assumed or established by social survey and then used to create a profile of preference against which places can be measured and ranked.     

Small towns in the united states: a perspective

Small towns are an important part of the rural settlement fabric in the United States, but there is very little substantive research into their capacity to survive or their intrinsic importance. However, recently there has been increasing interest shown by social scientists in these problems. This paper looks at features of this research from the point of view of the population and economic structure of small towns. It concludes by arguing that the problems of small towns are not indigenous to the towns, and calls for a comprehensive national urban policy.     

Software tools to support incident reporting in safety-critical systems

Incident reporting systems are playing an increasingly important role in the development and maintenance of safety-critical applications. The perceived success of the FAA's Aviation Safety Reporting System (ASRS) and the FDA's MedWatch has led to the establishment of similar national and international schemes. These enable individuals and groups to report their safety concerns in a confidential or anonymous manner. Unfortunately, many of these systems are becoming victims of their own success. The ASRS and MedWatch have both now received over 500,000 submissions. In consequence, the administrators of incident reporting systems increasingly rely upon software tools to support the administration of their systems. In the past, these systems have relied upon ad hoc applications of conventional database technology. However, there are several reasons why this technology is inadequate for many large-scale reporting schemes. In particular, the problems of query formation often result in poor precision and recall. This, in turn, has profound implications for safety-critical applications. Users may fail to identify similar incidents within national or international collections. These ad hoc approaches also neglect the opportunities provided by recent developments in computer assisted interviewing and in the monitoring of retrieval activities to build models of user behavior. These techniques offer a number of potential benefits. For instance, it is possible to automatically detect potential biases in the way that investigators analyze particular incidents.     

Sensitivity of Ozone Production to the Nmhc Composition, Aerosol Back-Scattering and High Chimney Emission

In this paper, three sensitivity studies are designed to analyze the effect of the NMHC (Non-Methane HydroCarbon) composition, the aerosol back-scattering and the high chimney NO_x emission to the photochemical prodution of ozone by using a one-dimensional photochemistry-diffusion model under a favourable meteorological condition. Measurements of the NMHC composition in Taipei indicated that the percentage of iso-butene, cis-2-butene, trans-2-butene and benzene in a unit volume was much higher than of those observed in other major cities. the high ratio of benzene was directly linked to its high percentage in gasoline. As to the unusually high amount of iso-butene, cis-2-butene and trans-2-butene, more researches are needed to identify their source. Concerns are raised as to how productive is NMHC composition is to the photochemical production of the surface ozone. A rough estimate shows that the total reactivity of the Taipei NMHC composition is about 1.21 × 10^-9 cm³ s^-1 which is 1.6 times that of the Los Angeles (LA) NMHC composition, while the simulated noon peak will be different by 28 ppbv, i.e. 18% more than that simulated with a LA composition.

Meanwhile, high aerosol loading is a serious problem in Taipei. the attenuation of the UV radiation by aerosols cannot be ignored. A numerical simulation shows that the noon ozone level will decrease from 178 to 141ppbv, i. e. about 21% reduction, with deterioration of the visual range from 85 to 5 km.

In the southern Taiwan, industry parks are mixed with the populated Kaohsiung city, hence the large emission of NO_x from high chimneys cannot be ignored. in this study, NO_x is assumed to be emitted in the layer between 235-460 m high with an emission rate of 0.05 or 0.145 ppbv/sec. the results show that the NO_x emitted from the elevated stack lead to a considerable reduction of surface ozone. Such conclusion is obtained due to the fact that a one-dimensional model is used in this paper. Whereas, if a three-dimensional regional model was used, then a higher productivity of ozone downstream would be simulated.     

Evaluation of leachate composition by multivariate data analysis (MVDA)

Landfills generate emissions in the form of gas and leachate. The emissions are often measured within monitoring programmes. It is likely that the requirements of such monitoring programmes can be extended in the future, particularly in light of the increased interest in specific organic substances. Multivariate data analyses (MVDA) have been used to evaluate the possibility of predicting the content of specific organic substances from more common analyses. The results indicate that this is possible for a specific leachate. MVDA can also be used to reduce the number of analyses performed within existing monitoring programmes while retaining information about all the variables formerly included in the programmes.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

HYDROLOGIC EFFECTS FROM CHANGES IN GROUND WATER PUMPAGE1

ABSTRACT: Simulation of a large stream-aquifer system in Nebraska has been accomplished for the period from 1975 to 2020 to determine effects of controls on ground water pumpage. Three scenarios tested consisted of average annual withdrawals of 15.2 ac-in/ac (FUTURE 1), 14.8 ac-in/ac (FUTURE 2), and 9.8 ac-in/ac (FUTURE 3). The highest quantity represents the historical tendency; while the 14.8 in. figure represents a slight reduction and also represents an equalization of irrigation application efficiencies throughout the area. The lowest figure represents a substantial increase in application efficiency. Comparisons between simulated ground water elevations indicate maximum savings of FUTURE 2 over FUTURE 1 of less than 8 ft. FUTURE 3 ft. FUTURE 3 levels are projected to be a maximum of approximately 13 ft. higher than FUTURE 1's. The relatively small savings from reductions in pumpage result primarily from recirculation effects. Differences between ground water contributions to stream flow are small for all scenarios. These contributions decrease with time and increasing pumpage amounts. Base flow rates at the end of the simulation are approximately 25 percent of those at the beginning.     

DESK TOP METHODOLOGY FOR MODELING BIOCHEMICAL OXYGEN DEMAND IN STREAMS1

: The modeling of dissolved oxygen in streams is a widely used technique, upon which a great deal of money has been spent. This paper concludes that the standard methods of DO modeling by computer are unnecessarily complex, and that for some purposes, they can be replaced without loss of accuracy by desk top BOD models. Taking as an example, a set of data used in DO modeling, it is shown (a) that the data are grossly inconsistent, (b) that simultaneous gathering of data introduces errors in streams of long travel time, (c) that much more data as to pollutant concentrations should have been obtained, and (d) that 24-hour DO data could have been dispensed with.     

Migration and natural fate of a coal tar creosote plume: 1. Overview and plume development

A volume of sand containing coal tar creosote was emplaced below the water table at CFB Borden to investigate natural attenuation processes for complex biodegradable mixtures. Coal tar creosote is a mixture of more than 200 polycyclic aromatic hydrocarbons, heterocyclic compounds and phenolic compounds. A representative group of seven compounds was selected for detailed study: phenol, m-xylene, naphthalene, phenanthrene, 1-methylnaphthalene, dibenzofuran and carbazole. Movement of groundwater through the source led to the development of a dissolved organic plume, which was studied over a 4-year period. Qualitative plume observations and mass balance calculations indicated two key conclusions: (1) compounds from the same source can display distinctly different patterns of plume development and (2) mass transformation was a major influence on plume behaviour for all observed compounds.     

Twenty-five years of HAZOPs

The HAZOP or hazard and operability study was developed by ICI over 25 years ago and is in wide use today throughout the world. The technique is intended to review, in a formalized manner, the design of a system such as a chemical process production plant to detect potential problems in the operation of the system. The system has been extended for use on all types of production, storage and distribution units. Experience in the use of hazard studies has lead to the development of a phased approach with three distinct design phases.