STREAM DEPLETION BY WELLS IN THE SOUTH PLATTE BASIN-COLORADO1

The agricultural production from the Lower South Platte Basin in Colorado represents a significant portion of the state economy. Until the early 1950's the production had developed almost exclusively by use of river water. Drought conditions combined with improved well technology resulted in an inordinate amount of well development in the valley during the period 1952-56. These wells were used for supplemental supply in many cases, but the application of sprinkler irrigation brought many acres of here-to-fore dry land into irrigated production. As a result of the vast amounts of groundwater withdrawal by the newly developed wells, senior surface appropriators found a decreasing amount of water available for use in the streams. The legislature, observing the doctrine of prior appropriation, ruled that all surface and ground water in a tributary would be treated and administered as one resource. This, of course, spelled doom for the well-oriented segment of the economy. Analysis of a segment of the river on an inflow-outflow basis was made with careful determination of all inflow-outflow in the study reach to include correlations required to determine ungaged side-channel in-flow and unmetered irrigation wells. Results indicate that wells have intercepted normal return flows to the river resulting in a decreased amount of surface water during the irrigation season. Stream depletion appears to equal the expected consumptive use of well water which ranged between 40% to 50% of the groundwater extraction.     

TiO2/SiO2催化剂光催化降解罗丹明B的表观动力学

采用多孔硅胶为载体的TiO₂/SiO₂光催化剂,建立了三相内循环流化床光催化氧化体系,并以罗丹明B染料为典型污染物,研究其降解规律.通过对罗丹明B降解过程的表观动力学研究,发现在该体系中罗丹明B的降解并不符合Langmuir-Hinshelwood反应动力学模型.实验表明,其降解反应动力学符合双曲型模式,即降解率的倒数1/X和时间的倒数1/t成线性关系.反应速率常数与反应物初始浓度无关,与光源强度和相对体积能量吸收速率成正比.将不同实验条件下的罗丹明B的降解率实测值与模型计算值相比较,二者能很好吻合,平均相对偏差仅为3.25%.     

A stochastic-advective transport model for NAPL dissolution and degradation in non-uniform flows in porous media

Remediation schemes for contaminated sites are often evaluated to assess their potential for source zone reduction of mass, or treatment of the contaminant between the source and a control plane (CP) to achieve regulatory limits. In this study, we utilize a stochastic stream tube model to explain the behavior of breakthrough curves (BTCs) across a CP. At the local scale, mass dissolution at the source is combined with an advection model with first-order decay for the dissolved plume. Field-scale averaging is then employed to account for spatial variation in mass within the source zone, and variation in the velocity field. Under the assumption of instantaneous mass transfer from the source to the moving liquid, semi-analytical expressions for the BTC and temporal moments are developed, followed by derivation of expressions for effective velocity, dispersion, and degradation coefficients using the method of moments. It is found that degradation strongly influences the behavior of moments and the effective parameters. While increased heterogeneity in the velocity field results in increased dispersion, degradation causes the center of mass of the plume to shift to earlier times, and reduces the dispersion of the BTC by lowering the concentrations in the tail. Modified definitions of effective parameters are presented for degrading solutes to account for the normalization constant (zeroth moment) that keeps changing with time or distance to the CP. It is shown that anomalous dispersion can result for high degradation rates combined with wide variation in velocity fluctuations. Implications of model results on estimating cleanup times and fulfillment of regulatory limits are discussed. Relating mass removal at the source to flux reductions past a control plane is confounded by many factors. Increased heterogeneity in velocity fields causes mass fluxes past a control plane to persist, however, aggressive remediation between the source and CP can reduce these fluxes.     

矿用救生舱内二氧化碳净化特性研究

煤矿救生舱是在矿井下发生事故后保护被困矿工生存、等待救援的密闭舱室设备。在救援过程中,二氧化碳的处理是舱内空气净化系统的一项主要功能。本文对救生舱内二氧化碳净化装置的功率、吸收效率、药剂床层厚度等因素进行了一系列试验,确定了救生舱二氧化碳的最优净化方式,并通过救生舱内真人生存试验对其进行了验证。最终得出救生舱内处理二氧化碳最佳反应条件为:药剂量20kg,最佳功率为100W;间歇式工作的运行时间与停机时间比例为2:3;在救生舱内8人生存模拟实验中,得出8kg药剂可供8人使用6.1h,平均吸收速率为1.34L/min。     

一种高效节能的生物三相流化床技术

将竖流式生物三相流化床改为封闭卧式生物三相流化床后 ,不但保留了竖流式生物三相流化床原有的优点 ,消除了竖流式生物三相流化床存在的一些缺陷 ,而且又新增了功能 ,特别是电耗下降近 4 0 %。并着重介绍封闭卧式生物三相流化床在地下车库或其它对高度有限制场所的应用实例。该设备在处理餐饮业废水和一些中、小型工业有机废水中有较高的推广价值。     

The use of nanovermiculite catalyst in the study of removal of the organic load and degradation of atrazine via ozone process in RPB reactor

Abstract

The main objective of this study is the degradation of a synthetic solution of atrazine by a modified vermiculite catalyzed ozonation, in a rotating packed bed (RPB) reactor. A 0.5?L RPB reactor was used to perform the experiments, using a Central Composite Design (CCD) response surface to construct the quadratic model based on the factors: pH, catalyst concentration and reactor rotation frequency. The response variable was the removal of the organic load measured in terms of Chemical Oxygen Demand (COD). After the complete quadratic model was constructed through the response surface, the COD degradation process had an optimal removal of 41% under the following conditions: pH 8.0, rotation of 1150?rpm and catalyst concentration 0.66?g L^?1.     

复极性固定床电解槽内电极电位的分布

本文通过设计独特的测量和检验实验装置，对复极性固定床电解槽内的电极电位进行了测试。发现了槽内反应的动力就是槽内粒子与溶液的电位之差，可通过调节它的变化来控制反应的进行。     

三相内循环流化床光催化反应器及其性能

依据流态化原理,设计出一种三相内循环流化床光催化反应器,对反应器的水力特性做了推算,确定了反应器的操作影响因素.对罗丹明B的降解实验结果显示出优越的性能,依据催化剂投加量及初始光强的不同,反应半衰期在4-10.5min之间.     

ESTIMATING THE Q100 IN BRITISH COLUMBIA: A PRACTICAL PROBLEM IN FOREST HYDROLOGY1

ABSTRACT. Estimates of peak flows, with specified return periods, are needed in practice for the design of works that affect streams in forested areas. In the province of British Columbia (B.C.), Canada, the new Forest Practices Code specifies the 100-year instantaneous peak flow (Q100) for the design of bridges and culverts for stream crossings under forest roads; and many practitioners are engaged in making such estimates. The state of the art is still quite primitive, very similar to the state of urban hydrology 30 years ago, when popular estimating techniques were used with little consideration given to their applicability. Urban hydrology then evolved on a much more scientific basis, such that within about a 10-year period, standard approaches to design were developed. Forest hydrology should follow the same pattern, at least as far as estimating design flows is concerned. Popular present day design procedures include the rational method and other empirical approaches based on rainfall data, as use of the standard flood frequency approach is limited by the paucity of relevant flow data. Estimating procedures based on peak streamflow measurements and statistics are likely to evolve, and these will include distinctions for rain, snowmelt, and rain on snow floods. Guidelines will also be developed for selecting and applying appropriate procedures for particular areas.     

活性炭固定床操作参数的优化

研究了操作参数对活性炭固定床处理有机废气的影响。温度升高，吸附容量下降。湿度的存在会减少活性炭对有机物的吸附容量。适当的操作气速为0.1-0.5m/s，在此范围内，气速与压降在对数坐标上呈线性关系。