细菌在近海污染监测及评价中的应用研究

通过对天津渤海湾的三个河流入海口(青静黄排水河、独流减河和海河),不同季节实地采集的水样中微生物数量及理化因子如温度、盐度、溶解氧(DO)、化学需氧量(COD)、无机氮等的研究,发现细菌指标与理化指标对污染指示结果有一定的相似性,都指示青静黄排水河河口污染较严重.利用SPSS软件的相关性分析方法对实验结果进行分析,发现水环境中细菌指标与理化因子具有一定的相关性.其中异养菌数与COD呈显著正相关性(P<0.05),与DO呈负相关性(P=0.051);大肠菌群数与理化因子DO呈极显著负相关关系(P<0.01),与COD呈正相关关系(P=0.061),与NO3-N,盐度呈负相关性(P>0.05).其他细菌指标与各理化因子也存在一定的相关性,但不明显.     

Extension of the EUROS Integrated Air Quality Model to Fine Particulate Matter by Coupling to CACM/MADRID 2

The European Operational Smog (EUROS) integrated air quality modelling system has been extended to model fine particulate matter (PM). From an extended literature study, the Caltech Atmospheric Chemistry Mechanism and the Model of Aerosol Dynamics, Reaction, Ionisation and Dissolution were selected and recently coupled to EUROS. Currently, modelling of mass and chemical composition of aerosols in two size fractions (PM_2.5 and PM_10–2.5) is possible. The chemical composition is expressed in terms of seven components: ammonium, nitrate, sulphate, elementary carbon, primary inorganic compounds, primary organic compounds and secondary organic compounds. Calculated PM₁₀ concentrations and chemical composition are presented for two summer months of the year 2003 (1 July to 31 August).     

Chemical fluxes in time through forest ecosystems in the UK - Soil response to pollution recovery

Long term trend analysis of bulk precipitation, throughfall and soil solution elemental fluxes from 12 years monitoring at 10 ICP Level II forest sites in the UK reveal coherent national chemical trends indicating recovery from sulphur deposition and acidification. Soil solution pH increased and sulphate and aluminium decreased at most sites. Trends in nitrogen were variable and dependant on its form. Dissolved organic nitrogen increased in bulk precipitation, throughfall and soil solution at most sites. Nitrate in soil solution declined at sites receiving high nitrogen deposition. Increase in soil dissolved organic carbon was detected - a response to pollution recovery, changes in soil temperature and/or increased microbial activity. An increase of sodium and chloride was evident - a possible result of more frequent storm events at exposed sites. The intensive and integrated nature of monitoring enables the relationships between climate/pollutant exposure and chemical/biological response in forestry to be explored.     

Stock market responses to chemical accidents in Japan: An event study

Despite recent major chemical process accidents in Japan, the top management teams of firms still avoid taking costly risk reduction measures because of their low perceived impact on firm performance. The disclosure of information on accident risks might motivate managers to enhance workplace safety because of the subsequent evaluation of firms by investors in stock markets. If the disclosed risk information is newly available for investors, firms with a high risk of accidents would receive a poor evaluation by stock markets and thus managers would take risk reduction measures to prevent stock prices from declining. In this study, we conduct an event study analysis to examine whether accident risk information is already reflected in stock prices, using data on the Japanese chemical industry. The results of our event study show that the estimated cumulative average abnormal returns of firms' stocks are significantly negative after severe accidents actually occurred. This finding implies that risk information is not already reflected in the stock prices of Japanese chemical firms and that the disclosure of accident risk information has the potential to motivate the top management teams of firms to reduce their firms’ accident risk.     

A comparative study of risk perception in small and large communities where chemical industries are present

Opinion polls were conducted to assess the level of risk perceived by the citizens in communities of different sizes where chemical industries were present. The aim of the study was to relate the risk perceived to variables such as the nature of risks, the specific information received regarding the industrial activity and the economic impact of this activity in the community.     

NETWORK AND SUBWATERSHED PARAMETERS EXTRACTED FROM DIGITAL ELEVATION MODELS: THE BILLS CREEK EXPERIENCE1

ABSTRACT: An automated extraction of channel network and sub-watershed characteristics from digital elevation models (DEM) is performed by model DEDNM. This model can process DEM data of limited vertical resolution representing low relief terrain. Such representations often include ill-defined drainage boundaries and indeterminate flow paths. The application watershed is an 84 km² low relief watershed in southwestern Oklahoma. The standard for validation is the network and subwatershed parameters defined by the blue line method on USGS 7.5–minute topographic maps. Evaluation of the generated and validation networks by visual comparisons shows a high degree of correlation. Comparison of selected network parameters (channel length, slope, drainage density, etc.) and of drainage network composition (bifurcation, length, slope, and area ratios) shows that, on the average, the generated parameters are within 5 percent of those derived from the validation network. The largest discrepancies were found for the channel slope values. The results of this application demonstrate that DEDNM effectively addresses network definition problems often encountered in low relief terrain and that it can generate accurate network and subwatershed parameters under those conditions.     

公路运输化学事故应急救援体系研究

以动态源的定义为基础 ,结合危化品公路运输特殊性 ,阐述了危化品在公路运输过程中发生化学事故后应急救援的原则、工作特点与基本要求 ;提出化学事故应急救援中的基本任务是控制危险源 ,抢救受害人员 ,指导并组织群众疏散、自救和做好事故现场清理洗消工作 ,消除危害后果 ;提出公路运输化学事故应急救援预案系统建设的总体目标是 ,在应用ITS智能交通系统对动态源精确定位的基础上 ,建立公路运输化学事故应急救援预案动态库及应急救援组织保障系统和应急救援技术支持系统 ,一旦事故发生 ,能够做到尽快有效处理 ,最大限度地减小或消除事故损失。     

Using Multimedia Modeling to Expedite Site Characterization

GOAL, SCOPE AND BACKGROUND: This paper uses two case studies of U.S. Department of Energy nuclear weapons complex installations to illustrate the integration of expedited site characterization (ESC) and multimedia modeling in the remedial action decision making process. CONCEPTUAL SITE MODELS, MULTIMEDIA MODELS, AND EXPEDITED SITE CHARACTERIZATION: Conceptual site models outline assumptions about contaminates and the spatial/temporal distribution of potential receptors. Multimedia models simulate contaminant transport and fate through multiple environmental media, estimate potential human exposure via specific exposure pathways, and estimate the risk of cancer and non-cancer health outcomes. ESC relies on using monitoring data to quantify the key components of an initial conceptual site model that is modified iteratively using the multimedia model. CASE STUDIES: Two case studies are presented that used the ESC approach: Los Alamos National Laboratory (LANL) and Pantex. LANL released radionuclides, metals, and organic compounds, into canyons surrounding the facility. The Pantex Plant has past waste management operations which included burning chemical wastes in unlined pits, burying wastes in unlined landfills, and discharging plant wastewaters into on-site surface waters. CONCLUSIONS: The case studies indicate that using multimedia models with the ESC approach can inform assessors about what, where, and how much site characterization data needs to be collected to reduce the uncertainty associated with risk assessment. Lowering the degree of uncertainty reduces the time and cost associated with assessing potential risk and increases the confidence that decision makers have in the assessments performed.     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.