Applications of resilience engineering principles in different fields with a focus on industrial systems: A literature review

This paper reviews literature that addresses applications of resilience engineering principles to various fields. Recently the concept has attracted great attention from a technical and industrial perspective. The primary focus of this paper is to review the resilience engineering applications to industrial systems with the purpose of applying them to the chemical industry. A systematic review is performed to classify peer-reviewed journal papers that are associated with resilience engineering applications into three categories: industrial systems, ecological systems, and interlinked systems. The literature in the category of industrial systems is further divided based on the type of approaches such as field studies, case studies, methodologies, and mathematical modeling. After thoroughly analyzing the literature, four key research areas are identified: Considering socio-technical factors for resilience assessment efficiently; Inculcating the possibility of multiple disasters in resilience assessment; Design optimization for resilience enhancement; Efficient restoration strategies. All these research areas have not been explored exclusively for chemical facilities to a great extent. It is concluded that if these research areas are addressed appropriately, it would help in triggering the research pertaining to the application of resilience engineering principles in chemical facilities.     

Identification of chemical hazards for terrestrial plants in the regulatory context: Comparison of OECD and ISO guidelines

Standardized test protocols are used in the regulatory context for identifying the hazardous properties of chemicals, wastes, and contaminated materials. This paper compares the relevance of two guidelines measuring effects on terrestrial plants, the OECD TG 208 and the ISO TG 22030 and presents the scientific basis for a recent decision of the European Chemicals Agency (ECHA) under the European chemicals regulation REACH. If there are no specific phytotoxicity alerts, both guidelines are considered suitable for assessing long-term hazards, providing that a sufficient number of species is included in the OECD protocol, the recommended minimum number is six, which offer a reasonably broad selection of species to account for interspecies sensitivity. The proposed methodology, based on a combination of probabilistic assessments using Monte Carlo analysis, can be adapted for supporting similar decisions under specific regulatory processes; for example, for assessing contaminated soils or pesticides’ applications.     

Spatial distribution of lindane in topsoil of Northern France

Lindane is a persistent organochlorine insecticide and the use of this insecticide in agriculture was banned in France in 1998. In this study we investigated the concentrations of lindane in topsoil in Northern France and used robust geostatistics to map the geographical distribution of lindane. The study was based on a 16 km × 16 km grid covering an area of ca 25 000 km². Lindane was found in all soils, even those from non-agricultural-application areas. Very low ratios of α-/γ-HCH and δ-/γ-HCH suggested that a long time had passed since technical HCH was used in the studied area, or that emission sources of lindane were still present. A strong gradient in lindane concentration was observed, with the highest lindane concentrations in an area located in the northern region. Results suggested that some of the lindane observed in the high concentration area may have come from volatilization of old lindane applied to intensively cultivated areas, which was then transported by prevailing winds coming from the south-west and deposited in a densely inhabited depression.     

Estimation of terrestrial chemical spill risk factors using a modified Delphi approach

The large number of chemical spills each year in the United States presents a potentially significant risk to human health and the environment. In an effort to manage this risk, the authors are developing a screening tool to assess the immediate threat to human and environmental receptors from land-based chemical spills. As part of this development effort, a modified Delphi survey was employed to determine the most important factors governing this risk and the relative importance of these factors. Results of the survey indicate that accounting for the attributes of the spilled chemical as well as the characteristics of the surrounding environment is imperative in making informed decisions regarding spill planning and mitigation. Survey results further indicate the greatest concern during spill events to be the risk to human health, which must be considered directly as well as factored into decisions concerning the protection of environmental receptors.     

Heavy haze pollution during the COVID-19 lockdown in the Beijing-Tianjin-Hebei region, China

To investigate the characteristics of particulate matter with an aerodynamic diameter less than 2.5 μm (PM_2.5) and its chemical compositions in the Beijing-Tianjin-Hebei (BTH) region of China during the novel coronavirus disease (COVID-19) lockdown, the ground-based data of PM_2.5, trace gases, water-soluble inorganic ions, and organic and elemental carbon were analyzed in three typical cities (Beijing, Tianjin, and Baoding) in the BTH region of China from 5-15 February 2020. The PM_2.5 source apportionment was established by combining the weather research and forecasting model and comprehensive air quality model with extensions (WRF-CAMx). The results showed that the maximum daily PM_2.5 concentration reached the heavy pollution level (>150 μg/m³) in the above three cities. The sum concentration of SO₄²⁻, NO₃⁻ and NH₄⁺ played a dominant position in PM_2.5 chemical compositions of Beijing, Tianjin, and Baoding; secondary transformation of gaseous pollutants contributed significantly to PM_2.5 generation, and the secondary transformation was enhanced as the increased PM_2.5 concentrations. The results of WRF-CAMx showed obviously inter-transport of PM_2.5 in the BTH region; the contribution of transportation source decreased significantly than previous reports in Beijing, Tianjin, and Baoding during the COVID-19 lockdown; but the contribution of industrial and residential emission sources increased significantly with the increase of PM_2.5 concentration, and industry emission sources contributed the most to PM_2.5 concentrations. Therefore, control policies should be devoted to reducing industrial emissions and regional joint control strategies to mitigate haze pollution.     

Significant contribution of secondary particulate matter to recurrent air pollution: Evidence from in situ observation in the most polluted city of Fen-Wei Plain of China

Particulate matter (PM) pollution in high emission regions will affect air quality, human health and climate change on both local and regional scales, and thus attract worldwide attention. In this study, a comprehensive study on PM_2.5 and its chemical composition were performed in Yuncheng (the most polluted city of Fen-Wei Plain of China) from November 28, 2020 to January 24, 2021. The average concentration of PM_2.5 was 87.8 ± 52.0 μg/m³, which were apparently lower than those observed during the same periods of past five years, attributable to the clean air action plan implemented in this region. NO₃⁻ and organic carbon (OC) were the dominant particulate components, which on average contributed 22.6% and 16.5% to PM_2.5, respectively. The fractions of NO₃⁻, NH₄⁺, OC and trace metals increased while those of crustal materials and elemental carbon decreased with the degradation of PM_2.5 pollution. Six types of PM_2.5 sources were identified by the PMF model, including secondary inorganic aerosol (35.3%), coal combustion (28.7%), vehicular emission (20.7%), electroplating industry (8.6%), smelt industry (3.9%) and dust (2.8%). Locations of each identified source were pinpointed based on conditional probability function, potential source contribution function and concentration weighted trajectory, which showed that the geographical distribution of the sources of PM_2.5 roughly agreed with the areas of high emission. Overall, this study provides valuable information on atmospheric pollution and deems beneficial for policymakers to take informed action to sustainably improve air quality in highly polluted region.     

Communities of Wood-Attacking Fungi in the Region of Oil and Gas Production

The communities of xylotrophic fungi were studied in the northern and middle taiga subzones of western Siberia, in forests growing in the region of oil and gas production and exposed to various anthropogenic factors (emissions of petroleum gas flares, oil pollution, spills of mineralized oil-field water, etc.). Structural and functional rearrangements in these communities were revealed, and the prevalence of rot in the tree stand was assessed.     

Removal of veterinary antibiotics from anaerobically digested swine wastewater using an intermittently aerated sequencing batch reactor

A lab-scale intermittently aerated sequencing batch reactor(IASBR)was applied to treat anaerobically digested swine wastewater(ADSW)to explore the removal characteristics of veterinary antibiotics.The removal rates of 11 veterinary antibiotics in the reactor were investigated under different chemical organic demand(COD)volumetric loadings,solid retention times(SRT)and ratios of COD to total nitrogen(TN)or COD/TN.Both sludge sorption and biodegradation were found to be the major contributors to the removal of veterinary antibiotics.Mass balance analysis revealed that greater than 60%of antibiotics in the influent were biodegraded in the IASBR,whereas averagely 24%were adsorbed by sludge under the condition that sludge sorption gradually reached its equilibrium.Results showed that the removal of antibiotics was greatly influenced by chemical oxygen demand(COD)volumetric loadings,which could achieve up to 85.1%±1.4%at 0.17±0.041 kg COD/m-3/day,while dropped to 75.9%±1.3%and 49.3%±12.1%when COD volumetric loading increased to 0.65±0.032 and1.07±0.073 kg COD/m-3/day,respectively.Tetracyclines,the dominant antibiotics in ADSW,were removed by 87.9%in total at the lowest COD loading,of which 30.4%were contributed by sludge sorption and 57.5%by biodegradation,respectively.In contrast,sulfonamides were removed about 96.2%,almost by biodegradation.Long SRT seemed to have little obvious impact on antibiotics removal,while a shorter SRT of 30–40 day could reduce the accumulated amount of antibiotics and the balanced antibiotics sorption capacity of sludge.Influent COD/TN ratio was found not a key impact factor for veterinary antibiotics removal in this work.     

Characteristics and formation mechanism of regional haze episodes in the Pearl River Delta of China

To investigate the characteristics and the specific mechanism of continuous haze,comprehensive measurements were conducted from 15 October to 19 November in the Atmospheric Environment Monitoring Super-Station in Heshan of Guangdong province.Five haze episodes occurred in October and November 2014 in the Pearl River Delta(PRD)region. The meteorological parameters, gas data, chemical compositions, and optical parameters of the aerosols were obtained. Among these events, the second haze episode,with the highest concentration of PM2.5 of 187.51 μg/m~3, was the most severe. NO~3-was always higher than SO_4~(2-), which indicated that motor vehicles played an important role in the haze, even though the oxidation rate from SO_2 to SO_4~(2-)was faster than that of NOXto NO_3~-. The difference between the hourly averages of Na+and K+during the haze episode and clean days was small, implying that straw combustion and sea salt had no significant effect on the occurrence of haze, and the backward trajectories of the air masses also conformed with this result. The air pollutants were difficult to disperse because of the significant decrease in the planetary boundary layer(PBL) height. Relative humidity played a crucial role in the formation of haze by leading to hygroscopic growth of the diameter of aerosols.