红壤区耕地有机物质的利用现状与开发策略

应用大量的调查和试验数据,论述了红壤区耕地有机物质资源的种类、数量及分布状况;分析了目前有机物质利用的现状及存在问题;探讨了开发有机肥料资源的对策。     

网箱养殖N、P物质平衡研究--以广东省哑铃湾网箱养殖研究为例

通过借鉴封闭系统水产养殖物质平衡的观测思路,把网箱当作黑箱,对广东省哑铃湾一个典型鱼排网箱养殖的物质平衡进行了观测和计算,建立了网箱养殖N、P物质平衡方程.结果表明,网箱养殖N、P物质的利用率比基塘、虾池等封闭系统要低得多,而且网箱养殖N、P的输入主要是投饵造成的,而输入的N、P物质,在水环境中发生一系列的迁移、转化,除了10%左右被利用收获外,其余的大部分被水动力带走,污染临近水域,还有一部分则沉积在底泥中,形成内源污染.     

城市物质代谢及其调控

对比研究了城市系统与自然生态系统物质代谢的主要差别。从现代控制论原理出发,对城市物质代谢涉及的主要因素及其相互关系进行了结构性分类研究,建立了城市物质代谢的控制论理论模型。      

化学吸收法采集固定污染源氨气的影响因素探究

固定污染源氨气的手工监测,干扰因素较多,其中采样环节尤为关键。实验通过催化氧化-化学发光法考察不同采样管线材质对氨气的吸附效果,离子色谱法考察化学吸收法采集氨气的吸收瓶类型、采样流量、吸收液种类、吸收液浓度及体积等采样条件对氨气吸收效率的影响。实验表明,316 L不锈钢与聚四氟乙烯对氨气的吸附较小,氨气的采样流量不宜超过1.0 L/min,棕色气泡式吸收瓶更适用于氨气样品的采集,磷酸溶液作吸收液对氨气的吸收效率较好,对于低浓度的氨气样品,应采用低流量长时间采集。     

湖北省应急物资保障体系探析

为深入贯彻落实习近平总书记关于健全统一的应急物资保障体系,把应急物资保障作为国家应急管理体系建设重要内容的重要讲话精神,总结分析湖北省应急物资保障体系现状,针对湖北省自然灾害和事故灾难救援救灾任务的情况,分析目前湖北省应急物资保障体系存在的问题及对策措施,为"十四五"提升应急物资保障能力提供参考.     

基于物质流分析的可持续发展方法探讨——以珠江三角洲为例

文章以珠江三角洲为例,选取区域物质总需求、区域过程总排放、区域总排放等指标,对珠江三角洲社会经济系统的物质流进行核算,结果表明:(1)珠江三角洲区域物质总需求、区域总排放年均递减率在7%以上,资源使用密度、单位GDP物质排放年均分别减少10.3%、11.4%。说明珠江三角洲产业结构开始升级,环境朝着利好方向发展。(2)隐藏流在各类相关指标中占有比例较高,占区域总排放的比例年均高达98%。说明推行减量化生产,提高物质利用率,进一步推动循环经济发展已迫在眉睫。(3)物质排放强度地域差异明显,惠州、肇庆、中山、江门历年均低于珠江三角洲平均水平,深圳、东莞远高于平均水平;IPAT分析显示,A呈上升趋势,T值呈逐年下降的趋势。总体来看,珠江三角洲发展循环经济具有极大的潜力,也具有极强的现实意义。     

Lead adsorption capacities of different components in natural surface coatings

Pb adsorption capacities of Fe oxide, Mn oxide and organic materials in natural surface coatings (biofilms and associated minerals) collected in three lakes, two ponds and a river in Jilin Province, China and Cayuga Lake in US were studied. A novel extraction technique was employed to remove one or more component(s) from the surface coatings. Pb adsorption to surface coatings before and after extraction was performed to determine the adsorptive properties of the extracted component(s). The statistical analysis of observed Pb adsorption was carried out using nonlinear least squares fitting (NLSF) to estimate the Pb adsorption capacity of each component of surface coatings. For each body of water, the estimated Pb adsorption capacity of Mn oxide( mol Pb/mol Mn) was significantly higher than that of Fe oxide( mol Pb/ mol Fe). The value of estimated adsorption capacities of organic materials with the unit mol Pb per kg COD was similar to or less than that of Fe oxides with the unit mol Pb per mol Fe. Comparison of components of surface coatings in different waters showed that the estimated Pb adsorption capacities of components in surface coatings developed in different natural waters were different,especially for Mn oxides.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

京津冀地区城市三生空间碳代谢效率特征及演进模式

探究城市三生空间系统的碳代谢效率有助于实现区域要素整合和空间优化.基于城市代谢视角,采用物质流分析法构建了京津冀地区三生空间碳代谢效率评估框架,并运用超效率DEA模型和Malmquist指数分析了2000~2020年三生空间碳代谢效率的时空分布、动态变化及演进模式.结果表明：①2000~2020年,京津冀地区三生空间碳代谢效率呈波动增长趋势,各城市碳代谢效率空间分异明显,碳代谢效率水平整体偏低,呈中部高、南北低的分布格局.②京津冀地区碳代谢效率全要素生产率呈增加趋势,技术进步变化和纯技术效率贡献作用不显著.超过50%的城市全要素生产率呈改善趋势,仅有38.46%的城市在碳代谢效率改善过程中存在技术进步现象,超过1/2地区的纯技术效率呈下降趋势,大部分城市的技术效率和规模效率变化指数大于1.③各城市碳代谢效率呈现不同的类型特征,按照其发展路径划为稳定式、反复式、渐进式和突变式这4种演进模式.各城市应据此采取差异化措施,合理配置三生空间资源,提高技术水平和规模效率,以期提高城市碳代谢效率水平.     

生物炭复合材料在土壤重金属污染修复领域的研究进展

当前,土壤重金属污染问题已成为了备受国内外关注的环境问题之一.相比于传统单一生物炭,生物炭复合材料具有循环利用性能更佳、吸附能力更强、修复选择性更广等优点,是一种稳定的、应用前景广的土壤重金属污染修复材料.系统性地综述了目前国内外生物炭改性优化方法以及吸附重金属相关机理,讨论了生物炭应用于土壤污染修复领域存在的潜在环境...