基于活性微生物特征的供水管壁生物膜生长特性

管网生物膜由各种活性微生物、微生物残体及有机无机杂质组成,管网生物膜的生长会导致机会致病菌寄居、管道腐蚀以及水质恶化等系列饮用水卫生问题.为研究供水管壁生物膜形成过程和附着生长活性微生物的分布特征,采用异养菌平板计数(HPC)、流式细胞术(FCM)和16S rRNA高通量测序对3种典型室内供水管材:聚氯乙烯(PVC)、无规共聚聚丙烯(PPR)、不锈钢(STS)内壁活性微生物的生长特性和群落多样性进行了分析.结果表明,PVC管壁生物量在第73 d最先达到峰值,3种管材内壁单位面积最大生物量、生物膜成熟时期生物量均呈现PVC PPR STS的规律. 3种管材表面活性细菌群落结构组成上,PVC管表面主要以硝化螺旋菌门为主,PPR和STS管以疣微菌门为主,其中STS管壁上生物膜物种丰富度最低、多样性最小,群落结构最简单. PVC和PPR管内壁表面相较STS管存在更多的蓝藻细菌和放线菌,在饮用水输配过程中更易引发饮用水嗅味问题.管材介质对管壁生物膜上微生物群落结构存在一定影响.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

高可视性服装标准ISO 20471：2013简介及应对策略

高可视服装国际标准ISO 20471：2013正式生效,该标准规定了警示服的设计和材料的性能要求,以保证使用者在高风险环境中的日间夜间条件下的可视性。该标准相对于曾经执行的标准EN 471：2003＋A1：2007进行了多处修改和调整,了解这些标准中的变化对于出口欧盟等国家的成衣制造商应对服装的设计和材料的要求将有非常好的借鉴意义。     

Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 10⁵ particles/cm³ for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.     

Aspects of Tests and Assessment of Filtering Materials Used for Respiratory Protection Against Bioaerosols. Part I: Type of Active Substance,Contact Time,Microorganism Species

This paper presents the results of a study on antimicrobial activity of polymer filter nonwovens produced by needle-punching or melt-blowing with an addition of disinfecting agents. The first part of the paper discusses how the biocidal activity of nonwovens is a function of the active agent added to the nonwovens, the duration of the contact of microorganisms with nonwovens and the type of microorganisms. The types of fibres and disinfecting agents had a considerable effect on the biocidal activity of nonwovens. The biocidal effect of nonwovens increased with the duration of their contact with microorganisms. Fibre activity differed considerably depending on the species of the microorganism. The microorganisms most sensitive to biocidal activity of the active filter nonwoven were S. aureus, M. flavus and E. coli. There were no biocidal effects on spore-forming bacterium B. subtilis.     

新型高沸点灭火剂与弹性密封材料的相容性研究*

为研究灭火剂与弹性密封材料的相容性问题,开展2种新型高沸点灭火剂2-溴-3,3,3三氟丙烯（2-BTP）、全氟己酮（Novec 1230）与飞机固定式灭火系统中3种常用密封橡胶材料硅橡胶（SI）、氟橡胶（FKM）和氟硅橡胶（FVQM）的全浸泡和反复浸泡实验,并对实验后橡胶基础物理参数与表面微观形貌进行测试与分析。结果表明:在全浸泡实验中,SI,FVQM与2-BTP相容性较好,SI,FKM,FVQM与Novec 1230相容性较好,可作为静态密封材料使用;在反复浸泡实验后,SI,FVQM在Novec 1230中性能变化较小,可作为其动态密封材料使用;SI,FKM,FVQM在2-BTP中力学性能大幅下降,不建议作为2-BTP灭火系统的动态密封材料使用。     

阴极材料对三相三维电极反应器电解处理酸性橙7的影响研究

采用具有不同阴极材料的三相三维电极反应器,对300 mg/L酸性橙7(AO7)模拟废水进行处理研究,重点考察阴极材料对脱色率和反应体系矿化能力的影响,同时利用HPLC、UV-Vis、GC-MS等分析方法对·OH、H2O2以及降解产物进行测定,探讨了3种电极对AO7的降解行为.结果表明,在电压20 V条件下电解60 min后,活性炭纤维(ACF)、石墨和不锈钢等3种阴极体系对于AO7的脱色率均高于96%,三者之间没有明显差别.但是ACF体系对TOC的去除率可达到57.4%,高于其它两者.3种阴极体系中均有高活性的·OH和H2O2生成,但是ACF阴极体系中产生的浓度较高,从而决定了其具有较高的矿化能力.几种不同电极体系电解AO7过程中都遵循了相同的产生酮类和萘酚类物质的过程.     

大气污染对石灰质文物的风化影响及防护新材料

综述了大气污染对石灰质文物风化影响的研究进展,涉及大气中气体污染物、大气中酸性降水、大气中的气溶胶。文章介绍了目前开发的防护新材料,主要包括有机氟聚合物材料、纳米材料和仿生材料,并指出开发未来新型防护材料的方向是寻找安全生物钙化菌和开发与石灰质文物相匹配的新型保护材料。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

3种人工湿地填料对磷的动态吸附特征

以河沙、页岩、石灰石等3种重庆常见基质为人工湿地填料,探讨了磷负荷和有机负荷对基质动态除磷效果的影响。结果表明,在同等磷负荷和有机负荷情况下,3种填料的去除效果依次为石灰岩（河沙（页岩;有机负荷对各填料除磷有重要的影响,随着有机负荷的增加,填料除磷率均有不同程度的降低。有机负荷对石灰岩除磷的影响较大,对河沙除磷的影响相对较小。