主、次裂隙对岩石变形破坏机制的影响研究

为研究主、次裂隙在近似T型分布下对岩石变形破坏机制的影响,基于含主、次裂隙类岩石试件的单轴压缩试验及线弹性断裂力学理论,研究了轴向压缩下由夹角变化引起裂隙岩石中主、次裂隙应力场的变化规律,并进一步探究了其对岩石强度与变形特征的影响。研究结果表明:次裂隙的存在对单一裂隙试件的强度特征有明显影响,含次裂隙试件强度降至单一裂隙试件的30.2%~47.5%;裂隙夹角由30°增加至60°时引起主裂隙相交节点两侧剪应力方向由同向转变为异向,由应力的叠加转变为应力的抵消,对裂隙岩石的破坏过程产生抑制作用,从而增强岩石的峰值强度;相较于裂隙间应力场的相互影响,新增裂隙数量所增加的能量消耗引起的强度特征变化更为显著。     

区域物质流规模结构分析评价方法及应用研究

生态经济体系中环境的引导和调控作用是经济系统物质代谢的重要组成部分.为了更为完善地分析评价经济发展和环境压力的关系,在输入端、输出端物质流规模和结构分析中侧重于物质隐藏流的综合计算,并以广州市南沙区为例进行实证研究.研究结果表明:南沙区域出口与出口物质隐藏流呈逐步上升趋势;南沙区的区内生产过程排放呈现"先降后增、总体递增"的趋势,今后南沙区应加强对工业生产过程中工业固废和二氧化硫排放的监控.     

基于地域性的三种污泥干化工艺的经济性比较

随着城市污水排放量的增多和成分的复杂化,污泥处理已成为污水处理厂面临的最大难题。脱水污泥含水率高,不利于后续的处理与再利用。污泥热干化可将污泥含水率降至10%~40%,但该过程耗能大,会大幅增加污泥处理成本,不利于污泥处理技术的推广应用。以拉萨、上海、重庆为例,分别对带式干化、热泵-太阳能干化、热泵-太阳能-蓄热干化3种污泥干化工艺的经济性进行分析,阐明了不同干化方式的适用特点,为相变蓄热技术在污泥干化中的推广应用提供了技术参考。     

微电解技术处理难降解工业废水的研究进展

介绍了铁碳微电解技术处理工业废水的作用机理。综述了铁碳微电解技术的研究进展。针对该技术在处理不同工业废水时普遍存在的堵塞、短路、死角、铁屑结块等问题,介绍了研发的新型纳米铁碳微电解复合材料及新工艺,并对铁碳微电解技术今后的研究方向进行了展望。     

Thermal runaway reaction for highly exothermic material in safe storage temperature

Highly exothermic materials have caused many serious accidents involving storage and transportation, due to being thermally reactive. The safe storage and management of these materials is still a critical problem in many countries. Our aim was to study the thermal hazard of thermal reactive materials, such as a propellant, by employing differential scanning calorimetry (DSC) non-isothermal tests and isothermal tests, and then comparing the kinetic parameters by isothermal and non-isothermal of kinetics. The chosen approach was to obtain reliable thermal decomposition by a safe and effective method, which acquired the kinetic and safety parameters of storage conditions that could be applied as highly exothermic materials' reduction of loss prevention and energy potential for safer design during storage transport and processing operations.     

电极材料对电动修复尾矿周边铅污染土壤的影响研究

影响土壤电动修复效率的因素很多,包括土壤类型、污染物性质、电压和电流大小、洗脱液组成和性质、电极材料和结构等.但很少有文献报道不同电极材料对电动修复土壤重金属污染的效率影响,文章采用不同电极材料(石墨、不锈钢和钛板)对尾矿附近的土壤进行电动修复,研究了修复效率及土壤pH随时间的变化情况.当电场强度为1 V/cm,采用石墨电板电动修复48 h总铅的去除效率为77％,不锈钢电极和钛电极的修复效率分别为64％和54％.石墨电极去除效率的提高归因于相比于不锈钢电极和钛电极,石墨电极提供更多的电子传递所需的活性界面.     

基于低碳发展的企业资源损失定量分析及其应用

低碳经济是企业发展中面临的选择,但目前的研究却缺少企业产品生产过程中的资源消耗与环境影响问题之间的定量分析.另有研究发现,企业处于积极环境行为的第一个层次,即只要企业污染治理水平停留在企业污染治理边际成本和企业污染治理边际收益相等处,企业治理环境就是可以获得收益的,因而,企业有进行降低环境影响的强烈需求.本文运用物质流成本会计(MFCA),从数量与价值角度使企业资源损失定量化,使其损失结构清晰化,因此有利于企业找到损失改善点,促使企业减少资源的初始投入量、提高资源使用率,并降低环境影响.以一个案例进行具体运用,在此基础上,引入外部损害成本原理,通过"资源流内部损失-废弃物外部损害"双重维度分析,使企业资源损失从经济性和环境性方面得到全面体现.本文从微观层面为企业低碳经济发展提供了一个新的研究视角.     

考虑期权采购的应急物资多种供应方式协调优化模型

突发事件的不确定性为灾后应急物资供应带来巨大挑战，而灾前政府难以控制相关应急物资的储备量及成本。实物储备、期权采购和市场化采购3种应急物资供应方式在灾前灾后应急物资保障具备各自的优势和弊端。仅靠单种物资供应方式难以权衡当前应急物资保障对经济性和时效性的要求，因此，需要将3种物资供应方式进行协调优化。对比3种供应方式在成本与效率方面的差异，利用期权采购弥补其他方式在成本和时效方面的不足，将3种物资采购方式协调整合。以政府和供应商双方签订期权契约为前提建立多种采购方式协调优化模型，通过优化算法求解模型。最后通过算例分析验证得出结论。研究结果表明:存在基于期权采购的多种采购方式并存的应急物资保障机制，可使应急物资供应的成本和效率得以权衡。     

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.     

Reduction of water usage in industry by using the MINLP coordinates technique

Natural resources are limited, so we need to handle them carefully. Wastewater also belongs as a significant natural resource. The re-usage of wastewater is to save fresh water and for the preparation of raw materials or/and utilities. The wastewater re-usage distribution can be optimised using mixed-integer nonlinear programming (MINLP), as a tool in combinations using the coordinates technique. The main goal of this MINLP coordinates technique was: i) wastewater and condensate, as produced during different industrial processes, could be collected for: utilities for steam-generation, and the preparations of raw materials; ii) wastewater and condensate could be collected within the main reservoir; iii) distributions from the main reservoir could be used with including different alternatives, which can reduce pollution, based on the re-usage of wastewater. Alternatives included in the optimization model represent potential solutions, which need to be evaluated on appropriate way.The MINLP coordinates technique for wastewater re-usage distribution was tested on existing formalin and methanol industrial processes, thus allowing the saving of water and generated by 280 kEUR/a profit.