资源循环复杂物质流系统的Petri网建模方法研究

物质流分析是研究循环经济的重要方法,本文面向资源循环的流程制造企业,对不同复杂度的物质流系统进行了建模方法研究。首先对国内外在物质流领域的建模理论研究进行了综述,然后对物质流的特点和循环物质流的建模方法进行了分析,对基于投入产出表格的物质流分析方法、理论层面基于图论的物质流分析方法以及物质流分析软件进行了综述,最后重点探讨了Petri网建模与仿真工具在循环物质流分析中的建模方法,研究了不同类型Petri网在解决不同复杂度的物质流系统问题中的适用性,为物质流建模与仿真提供理论支撑。     

用温湿度仪测定复合材料包装容器透湿度

介绍了采用温湿度仪连续监测的方法测定复合材料包装容器的透湿度,对缩短试验时间,减小测试误差具有参考意义。提出对于复合材料包装容器部分为金属材料的情况,透湿面积的计算方式。     

类氧化硅气凝胶吸附材料的制备及其吸附性能

以有机硅高沸物和Na₂SiO₃·9H₂O为原料,采用溶胶-凝胶法制备出疏水性的类氧化硅气凝胶吸附材料。采用透射电子显微镜、傅里叶变换红外分析仪和比表面与空隙度分析仪对该吸附材料的结构进行表征。表征结果显示,该吸附材料呈海绵状多孔结构,比表面积为294.48 m²/g,孔径分布较宽（为2 ~140 nm）,平均孔径为8.95 nm。实验结果表明：采用该吸附材料常温下静态吸附处理质量浓度为10 mg/L的罗丹明B（RhB）溶液,在类氧化硅气凝胶吸附材料加入量50 g/L、静态吸附时间5 h的最佳静态吸附工艺条件下,RhB去除率为98.8%,吸附后RhB质量浓度为0.124 mg/L;采用该吸附材料常温下动态吸附处理质量浓度为15 mg/L的RhB溶液,吸附4 h后开始穿透,吸附7 h后完全穿透。穿透时间较长,表明该吸附材料具有较大的吸附容量。     

S-K型管式混合器-微絮凝高速过滤的实验研究

基于2种传统管式混合器的特点,研究了苏尔士-凯尼斯（S-K）新型组合管式混合器在预氧化-微絮凝高速过滤技术中的应用,对苏尔士（Sulzer）管式混合器、凯尼斯（Kenics）管式混合器及s-K型管式混合器高速过滤出水水质进行了对比分析,结果表明,S-K型微絮凝方式对浊度、COD及TP的平均去除率比其他2种混合器混合方式的去除效果提高了5％～10％,分别为80．3％、64．76％和51．15％。S-K型混合器过滤形成的絮体能够充分利用深层滤料,延长过滤周期。     

Knowledge-based system,equipped with cluster analysis for eco-material selection: an automobile structure case study

The aim of this study is to develop a material selection framework structured around a knowledge-based system (KBS). Specifically, a hybrid data mining technique is employed to extract knowledge from large datasets using cluster analysis techniques; the mined knowledge then serves as the inference logic within the KBS designed for material selection purposes. Cluster analysis results are used as a basis for the tree-based structure of the KBS where if–then rules are developed based on the general cluster properties; that is, inference logic is structured in a way such that it can predict general sustainability characteristics of the material as well as its exact mechanical, cost and physical properties. To develop the structure of the KBS, the selection structure employs sustainable material indices. Additionally, the proposed material selection model of the KBS is purposefully composed of material sustainability, functionality and cost indices. The constructed knowledge is then demonstrated for selecting automobile structural panels.     

正渗透技术在污水资源化中的研究进展

<正>渗透技术(FO)是一种以半透膜两侧溶液渗透压之差作为水分子跨膜驱动力的绿色膜分离技术。介绍了FO的原理及其对污染物的截留率较高、能耗小、膜寿命较长、不易发生膜污染且污染后的膜清洗更简单等优点。综述了FO在污水资源化领域的研究进展和应用现状,分析了目前应用中存在的主要问题,指出完善基础理论、研发膜材料、回收驱动液等是未来FO的主要发展方向。     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

自制模拟样及留样复测的质控技术探讨

介绍了环境监测标准滤膜、标准滤筒、模拟降尘的制备方法、使用方法、实际效果。阐述了滤膜中铅、土壤样品、底泥（沉积物）、污水厂处理污泥等留样的来源、必要性及作用。探讨了滤膜中铅留样复测质控的评判依据。     

纳米材料在痕量重金属离子测定中的应用

介绍了纳米材料的吸附性能,评述了影响其分离富集重金属离子效果的主要因素,综述了纳米金属氧化物、碳纳米管及其他纳米材料在痕量重金属离子测定中的应用进展,提出提高纳米吸附材料的选择性和稳定性,开发便携式商品化的纳米材料萃取小柱是今后的发展方向.     

再生资源的回收利用与保护生态环境

再生资源是指社会生产和消费过程中产生的可以利用的各种废旧物资。再生资源的回收利用是资源综合利用的重要组成部分,是合理利用资源、保证资源永续、减少环境污染、提高经济效益的重要手段。商业部门再生资源行业担负着再生资源的回收、加工、生产、经营业务,为国家资源综合利用事业做出了巨大贡献。