覆膜滤料过滤性能的试验研究

对覆膜滤料与普通（渗膜）滤料的过滤性能进行了试验研究,结果显示：与普通滤料相比,覆膜滤料具有过滤效率高、运行阻力低、使用寿命长等特点。覆膜滤料的过滤性能更佳,更能满足烟尘过滤的要求。     

Material flow analysis for a sustainable resource management in island ecosystems

The Galapagos Archipelago (Ecuador) is one of the most well-known natural sites in the world for its unique biodiversity. This sensitive ecosystem is at risk due to a problematic equilibrium between its conservation policy and development demand. To contribute to implementing integrated sustainable resource management in the Galapagos Islands, a material flow analysis (MFA) of Santa Cruz – the island with the highest anthropic pressure in the archipelago – has been performed, outlining a quantitative and qualitative assessment of the direct flow of goods throughout the system. MFA outcomes have been used to evaluate and forecast the impact of some policies and strategies on the local system, focusing in particular on fossil fuel consumption and local agricultural production. This case study stresses the need to introduce a local MFA protocol to decision-makers’ toolbox, as it provides quantitative assessments on a broad spectrum of local development issues.     

吸波材料反射率的现场测量方法

通过对微波暗室中安装在墙壁上的吸波材料反射率的现场测量方法的研究,采用矢量网络分析仪对吸波材料反射率进行现场测量时,利用时域门技术来减小暗室现场对吸波材料反射率测量的影响,通过比较标准金属板和吸波材料的测量值得到吸波材料的反射率。     

Understanding the regional context of sustainable concrete in Asia: Case studies in Mongolia and Singapore

In order to improve the sustainability of the Asian concrete industry, it is important to understand the effect of regional context considering the widely varying socio-economic conditions present in Asia. This research in Mongolia and Singapore was conducted as a continuation of previous studies in Japan, Thailand and South Korea in order to further contribute to understanding regional context, particularly geographic, climate, and economic factors. Geography and climate were found to strongly affect the means by which durability should be assured in each country, as Singapore has a tropical climate whereas Mongolia experiences a large temperature variation with extremely cold winters. The ability to access construction materials and resources was also related to geography, as Singapore, while resource poor, is an international shipping center, whereas Mongolia has abundant resources but few access routes for imports. Quality control issues in Mongolia could be understood in the context of the lower level of economic development, whereas in Singapore the high level of development has lead to an emphasis on green construction, with the government taking the lead in implementing new systems and technologies.     

Dielectric barrier discharge plasma-assisted modification of g-C3N4/Ag2O/TiO2-NRs composite enhanced photoelectrocatalytic activity

Dielectric barrier discharge (DBD) plasma applied as surface treatment technology was employed for the modification of Ag₂O and graphitic carbon nitride (g-C₃N₄) powders. Subsequently, the pretreated powders were sequentially loaded onto TiO₂ nanorods (TiO₂-NRs) via electro-deposition, followed by calcination at N₂ atmosphere. The results indicated that at the optimal plasma discharge time of 5 min for modification of g-C₃N₄ and Ag₂O, photocurrent density of ternary composite was 6 times to bare TiO₂-NRs under UV-visible light irradiation. Phenol was degraded by using DBD plasma-modified g-C₃N₄/Ag₂O/TiO₂-NRs electrode to analyze the photoelectrocatalytic performance. The removal rate of phenol for g-C₃N₄-5/Ag₂O-5/TiO₂-NRs electrode was about 3.07 times to that for TiO₂-NRs electrode. During active species scavengers’ analysis, superoxide radicals and hydroxyl radicals were the main oxidation active species for pollutants degradation. A possible electron-hole separation and transfer mechanism of ternary composite with high photoelectrocatalytic performance was proposed.     

典型室内公共场所灰尘中PBDEs污染特征及源解析

为探索以多溴联苯醚（PBDEs）为代表的半挥发性有机化合物在典型室内公共场所中的污染特征及与材料的关系,在网咖、电子市场、建材市场、商场和图书城5类典型公共场所采集分析了灰尘样品,利用环境模拟舱研究了不同污染源材料中PBDEs的挥发强度系数（K_vsPBDEs）、衰减半衰期,结合主成分分析（PCA）分析了PBDEs的浓度与不同室内材料间的关系.结果表明,杭州5类典型室内公共场所灰尘中∑₁₄PBDEs的平均值分别为：网咖（2471.75ng/g）>电子市场（1071.77ng/g）>建材市场（900.63ng/g）>商场（441.27ng/g）>图书城（243.36ng/g）.所选取的10种室内典型污染源材料中∑₁₄PBDEs含量最高的为保温棉（91.61μg/g）,最低的为电路板（7.97μg/g）;K_vsPBDEs最高的为电线[14.04×10⁴μg/（g·m²）],最低的是纤维墙纸[0.87×10⁴μg/（g·m²）];塑料地毯、保温棉和纤维墙纸在40℃下的衰减半衰期分别为192,375和61d.研究发现室内公共场所中PBDEs的浓度与不同材料有关：网咖中PBDEs主要来自于纤维墙纸和电线;超市和图书城中PBDEs主要来自于陶瓷阻燃布和混纺地毯;建材市场中PBDEs主要来自于保温棉、电路板和塑料墙纸;电子市场中PBDEs主要来自于纤维阻燃布和电线.     

中国报废汽车中铂族金属回收潜力估算

基于Gompertz模型预测中国2018~2050年民用汽车的社会保有量;在此基础上,采用物质流分析方法估算得出我国汽车高峰报废年限大约为9a.然后,通过市场供给A模型预测我国2018~2025年汽车报废量,结果显示,我国汽车报废量到2025年将达到2535.05万辆,并且地理空间分布极不均衡.基于上述汽车报废量的时空分布,测算不同技术发展情景下废汽车三元催化剂中的铂族金属回收潜力和需求量.结果显示：如果按照当前催化剂消耗水平,全国铂族金属的需求量均在2019年达到峰值,铂钯铑分别达到4.57,65.70,7.92t,有望实现行业内闭环供应;如果以欧盟汽车尾气治理标准为目标,而现有汽车技术不发生根本变化,需求量将大幅增加,铂钯铑分别在2020年达到峰值85.01,109.38,8.37t,存在严重的供需矛盾.为此,建议在汽车生产者责任延伸制度中,关注废催化剂的回收和再生利用,以促进前端生产环节在不同技术选择中考虑稀贵金属的供给限制.     

等离子体技术在材料领域中的应用研究进展

详述了等离子体在材料领域的应用研究进展,在材料表面处理方面可实现材料的表面粗糙化、表面清洁、表面化学基团引入和表面亲水性调变等,在催化材料制备方面可用于催化剂的还原、氧化、掺杂、刻蚀以及特殊化合物的合成等。还分析了等离子体技术在材料制备领域具备诸多优势,但仍然面临一些挑战,如等离子体处理具有时效性、处理量小、等离子体发生作用机制不清晰、工程放大困难等。因此,需要从等离子体反应机理及工程技术两个层面进行更深入研究,以期该技术在材料领域获得更广泛的应用。     

实验室加速腐蚀环境下7050-T7451厚板疲劳性能研究

目的研究两种应力集中系数7050厚板铝合金材料在腐蚀环境下的腐蚀疲劳性能。方法开展7050厚板铝合金材料在3.5%NaCl盐水和油箱积水两种环境下的腐蚀疲劳实验,采用三参数式进行S-N曲线拟合分析不同应力集中系数、不同腐蚀环境对7050厚板铝合金材料疲劳性能的影响。结果腐蚀环境和应力集中系数都会对7050厚板铝合金材料的疲劳性能有影响,3.5%NaCl盐水和油箱积水两种腐蚀环境相较于应力集中系数对于降低材料疲劳性能的影响更大。结论减少7050厚板铝合金应力集中系数,加强7050厚板铝合金材料腐蚀防护对于提高材料抗疲劳性能有显著作用。     

浅层淹水条件下不同施肥处理对黑土温室气体排放的影响

以东北黑土区长期耕作土壤为对象,通过室内培养试验研究了浅层淹水条件下不同施肥处理对黑土温室气体排放的影响.结果表明,浅层淹水条件下,与不施肥对照处理相比,单施氮肥处理对土壤CO₂排放没有显著影响,氮肥配施猪粪或者秸秆则显著促进了CO₂的排放,使得CO₂排放速率提高了一个数量级,氮肥配施秸秆处理的CO₂排放量最高.浅层淹水条件下,与不施肥对照处理相比,施用氮肥显著促进了土壤N₂O的排放.而与单施氮肥处理相比,氮肥配施猪粪和秸秆则显著抑制了N₂O的排放,表现为土壤对N₂O的微量吸收,氮肥配施秸秆处理的N₂O吸收量相对较高.浅层淹水条件下施用氮肥抑制了土壤CH₄的排放,而与单施氮肥处理相比,氮肥配施猪粪或者秸秆则促进了土壤CH₄的排放.