Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

Cu^2＋、Zn^2＋对生物脱氮系统的影响

Cu^2＋和Zn^2＋是污水处理工艺中经常遇到的金属离子。在驯化好的活性污泥系统中,研究了金属离子Cu^2＋和Zn^2＋在0～100mg／L浓度下对活性污泥生物脱氮系统的影响。试验发现Cu^2＋＞5mg／L、Zn^2＋＞30mg／L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下cu“对硝化过程的抑制作用比Zn^2＋大。Cu^2＋≤0．5mg／L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu^2＋＞0．5mg／L时,对反硝化产生抑制作用,随着浓度的增加,TN去除率逐渐下降。Zn^2＋不影响反硝化过程,仅在大于30mg／L时,对硝化过程产生抑制作用。重金属Cu^2＋对生物脱氮系统的影响明显强于Zn^2＋。     

聚合氯化铝铁去除微污染水体中藻类的研究

以聚合氯化铝铁(PAFC)为絮凝剂,H2O2为预氧化剂,用正交实验研究了PAFC处理微污染水体中藻类和降低浊度,得出正交实验中各因素的主次关系及对除藻和除浊度的影响,研究表明,ρPAFC是影响除藻和除浊度的重要因素.在最佳处理条件,即ρPAFC为20 mg/L,ρH2O2为6 mg/L,pH为7,搅拌时间为4 min,能使水体中藻细胞街度从9.4×107 cells/L降至3.16×106 cells/L,除藻率为96.6%,浊度降至0.70 NTU,除浊度率达93.0%.     

硝酸盐对反硝化除磷过程的影响分析

在厌氧/缺氧间歇反应器内考察了硝酸盐进水浓度及进水方式对反硝化除磷过程的影响。结果表明：在缺氧阶段,反硝化除磷菌(DPBs)可将硝酸盐转化为亚硝酸盐,当硝酸盐浓度较低时,DPBs以亚硝酸盐为电子受体吸磷。进水COD浓度为220 mg/L,正磷浓度为6.8 mg/L,硝酸盐初始浓度为26 mg/L时,系统达到最佳脱氮除磷效果,期间亚硝酸盐浓度积累至10.71 mg/L。采用连续流投加硝酸盐的方式更利于氮磷的高效去除。     

Cu~(2+)、Zn~(2+)对生物脱氮系统的影响

Cu2+和Zn2+是污水处理工艺中经常遇到的金属离子.在驯化好的活性污泥系统中,研究了金属离子Cu2+和Zn2+在0～100 mg/L浓度下对活性污泥牛物脱氮系统的影响.试验发现Cu2+＞5 mg/L、Zn2+＞30 ms/L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下Cu2+对硝化过程的抑制作用比Zn2+大.Cu2+≤0.5 mg/L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu2+＞0.5 mg/L时,对反硝化产牛抑制作用,随着浓度的增加,TN去除率逐渐下降.Zn2+不影响反硝化过程,仅在大于30 mg/L时,对硝化过程产生抑制作用.重金属Cu2+对生物脱氮系统的影响明显强于Zn2+.     

微曝气Fenton氧化法处理模拟双酚A废水的效果及其生物验证

研究了微曝气Fenton氧化法关键工艺参数对模拟双酚A（BPA）废水处理效果的影响,并从活性污泥性质和污染物去除率两方面,采用膜生物反应器(membrane bioreactor, MBR)对微曝气Fenton氧化法的处理效果进行了实验验证,为实现BPA废水的生物处理奠定基础。结果表明,初始pH值、反应时间、H₂O₂/COD(质量浓度比)、H₂O₂/Fe²⁺ (摩尔浓度比)、反应温度及曝气量均对预处理效果有较大影响,在最佳条件下,COD去除率可达70%,BOD/COD值则由原废水的0.02提高到0.50以上。MBR处理上述出水的结果表明,经微曝气Fenton氧化处理BPA的废水,可较好地适应后续的生化处理。     

花叶芦竹水平潜流人工湿地脱氮性能研究

采用花叶芦竹水平潜流人工湿地处理生活污水,对其脱氮性能进行研究。结果表明：在HRT＝5 d,对TOC,NH⁺₄-N,NO^-₂-N,NO^-₃-N和TN的去除效果分别达到92％、93％、84％、51％和88％,相应空白湿地的去除率分别为91％、85％、-232％、-203％和66％。大部分TOC在湿地的前端被去除。花叶芦竹可以直接吸收氮素,向湿地输送氧气,通过根系分泌物提供碳源。因此,花叶芦竹人工湿地具有很好的硝化反硝化能力,实现了良好的脱氮性能。     

高效菌藻塘系统对农村污水中磷的强化去除效果研究

研究了高效菌藻塘系统处理太湖地区农村生活污水除磷效果及其强化措施。高效菌藻塘和水生生物塘HRT分别为8 d和4 d,进水总磷浓度为1.7～17.1 mg/L,出水总磷浓度全年平均值为3.33 mg/L,高效菌藻塘系统的除磷能力欠佳。通过降低水生生物塘内水深、采用废弃石膏作为填料构建了新型复合水生生物塘,HRT=1.6 d条件下,复合水生生物塘出水总磷可保持在1 mg/L以下,可达到GB18918-2002一级B排放标准。