丁香蓼对Cu富集效应的研究

通过盆栽实验研究不同浓度的Cu胁迫对丁香蓼响应和富集效应的影响,结果表明,随着Cu的浓度增加,丁香蓼的株高和生物量降低,长势减弱,但在低浓度(ω(Cu)为125 mg/kg)时降低不明显,与对照组差异性不显著,高浓度与对照组差异性显著。根茎叶中Cu含量随着添加的Cu浓度增加而增加,Cu的含量和富集系数都表现为根叶茎,对Cu的积累量表现为根、茎叶,丁香蓼不是Cu的超富集植物,但对Cu具有较好富集作用和忍耐能力。     

双甘膦废水处理技术研究

双甘膦废水中含有高浓度总磷、有机磷、甲醛、氰化物、氨氮、COD,运用三效蒸发＋强氧化＋两级化学除磷＋UASB＋兼氧＋好氧组合处理双甘膦废水。研究结果表明双甘膦废水排放满足《污水综合排放标准》（G88978—1996）二级排放标准。     

Drag finishing of sensitive workpieces with fluidized abrasives

A new mass finishing technology, namely drag finishing of brass (Cu–30 wt.% Zn) rings with fluidized abrasives, is reported. A new equipment, which combines the typical features of the drag finishing machines to hold the workpiece with the moving abrasives of fluidized beds, was designed. The equipment was validated by performing several experimental tests varying rotary speed and processing time. The evolution of the surface morphology of the workpieces, their mass loss and dimensional accuracy after processing were assessed after each finishing step. The designed equipments allowed to finish with a high level of accuracy and in short time range the brass rings. Material removals and out-of-tolerances of the workpieces could be limited once the appropriate settings of the process were selected. Low energy requirements, lack of any residuals after processing and facile operations make the fluidized bed assisted drag finishing industrially sustainable and very promising in several manufacturing domains.     

Inertia welding for assembly of copper squirrel cages for electric motors

The automotive industry is developing designs and manufacturing processes for new generations of electric motors intended for use in hybrid and electric vehicles. There is interest in replacing the aluminum traditionally used in induction motor rotors with copper to improve motor capability. This paper focuses on solid-state welding to join copper end rings to copper spokes in the fabrication of copper rotors. Inertia friction welding was explored to examine weldability of these copper components. A better understanding of inertia welding characteristics will help the advancements in its application for induction rotors. The limitations of this application are discussed.     

烟气污染综合治理的研究现状及发展趋势

烟气污染物大致分为气态污染物（SOx和NOx）、颗粒物和重金属.烟气综合治理的研究基础应先研究三类污染物之间、污染物与常用处理工艺之间以及不同污染物处理工艺之间的相互影响和作用.烟气污染综合治理的思路可归纳为工艺直接组合、集成控制与同时处理,其中以同时处理为最优.同时脱硫脱硝的研究趋势为等离子体技术与活性炭吸附技术,同时除尘脱汞的研究趋势则为汞在除尘过程中的迁移转化和汞的氧化剂和氧化方法的研究.     

FND-CASS工艺与CASS工艺处理城市污水的对比试验研究

为强化CASS工艺脱氮除磷效果,提出FND-CASS工艺。FND-CASS工艺与CASS工艺的对比试验结果表明:FND-CASS工艺在有机污染物去除和氨氮的硝化方面能力略有下降,但是在脱氮除磷方面,在节省耗氧量的前提下具有明显的优势。在同样的进水流量且DO浓度控制较低的运行条件下,FND-CASS工艺的TN去除率达到80.52%,TP去除率达到80.44%,而通常的CASS工艺的TN和TP的去除率仅分别为73.51%和67.00%。     

稀脉萍对水中甲基橙的毒害响应及去除研究

用甲基橙作为胁迫因子,研究了甲基橙对稀脉萍叶片过氧化物酶活性、可溶性蛋白含量和叶绿素含量的影响,并采用稀脉萍去除甲基橙。结果表明：随着甲基橙浓度的增加,过氧化物酶活性呈先上升后下降的趋势,当甲基橙浓度为140mg／L时,过氧化物酶活性达到最高值。当甲基橙浓度＞100mg／L,可溶性蛋白含量急速下降。叶绿素含量和叶绿素a／b比值均随甲基橙浓度的升高而降低。当甲基橙浓度为20 mg／L时,稀脉萍对甲基橙的去除需经10 d的延滞期,24 d后去除率达89.6％。     

n(NO3--N)/n(NO2--N)对混培养菌与纯培养菌同步脱氮除硫的影响

在温度30℃、pH为7、硫氮比为5/3、厌氧条件下,对比研究了不同n(NO-3-N)/n(NO-2-N)对荧光假单胞菌和铜绿假单胞菌混培养菌同步脱氮除硫影响.随着n(NO-3-N)/n(NO-2-N)减小,荧光假单胞菌、铜绿假单胞菌对NOx-N去除率逐渐增高,而S2-去除率却依次减少,混培养菌对NOx-N去除效率先增加后趋于平稳.n(NO-3-N)/n(NO-2-N)对混培养菌去除S2-几乎没有影响.荧光假单胞菌能迅速将NO-3-N转化为NO-2-N,但NO-2-N转为N2却相对缓慢,培养液中出现NO-2-N累积;而铜绿假单胞菌将NO-2-N还原N2的能力明显比荧光假单胞菌强,培养液未反应的NOx-N以NO-3-N为主,未出现NO-2-N累积.混培养菌对NOx-N转化的情况介于荧光假单胞菌与铜绿假单胞菌之间.荧光假单胞菌同时获得较高NOx-N、S2-去除的n(NO-3-N)/n(NO-2-N)为5/5,铜绿假单胞菌为10/0,混培养菌为5.0/5.0.混培养菌对NOx-N、S2-的同步去除效果优于单菌株荧光假单胞菌和铜绿假单胞菌.     

光电Fenton技术处理污泥深度脱水液研究

以光电Fenton技术处理污泥深度脱水液,试验结果表明,利用光电Fenton技术能快速有效地去除废水中的污染物.在最佳试验条件下,即初始pH为3.0,H2O2投加量65.3 mmol·L-1,FeSO4投加量6.53 mmol·L-1[n(Fe2+)∶n(H2O2)=1∶10),外加电压为7.5 V时,经光电Fenton技术处理20 min后污泥脱水液的COD去除率可以达到59.0%.同时TOC、TN、NH+4-N及TP的去除率也分别达到了49.3%、20.6%、73.6%和96.5%.该项研究为光电Fenton技术在废水处理中的应用提供了参考.     

垃圾填埋场渗滤液短程生物脱氮的长期稳定性实验研究

以实际高氨氮垃圾渗滤液为研究对象,考察了单级UASB-SBR生化系统除有机物和脱氮特性,重点研究了常、低温条件下,该生化系统生物脱氮的长期稳定性.623 d的实验结果表明,基于UASB反应器内高效的反硝化和厌氧产甲烷联合去除机制,以及SBR反应器内几乎100%的硝化和反硝化,在进水COD浓度为1 000~13 800 mg·L-1条件下,最终出水COD浓度为150~1 234 mg·L-1,在进水NH+4-N浓度为574~2 360 mg·L-1条件下,最终出水NH+4-N小于10 mg·L-1,平均去除率分别在90%和98%以上,尤其是获得了99.2%的TN去除率,出水TN小于30 mg·L-1,实现垃圾渗滤液内有机物和氮的高效、深度去除.整个实验期间,SBR反应器实现并维持了稳定的生物硝化和反硝化,成功跨越2个冬季,15℃以下共计171 d,最低温度为10.2℃.