URBAN STORMWATER QUANTITY/QUALITY MODELING USING THE SCS METHOD AND EMPIRICAL EQUATIONS1

ABSTRACT: Runoff depth and pollutant loading (Biological Oxygen Demand [BOD₅], Total Suspended Solids [TSS], Total Kjeldahl Nitrogen [TKN] and lead [Pb]) computations of urban stormwater runoff from four small sites (i.e., 14.7–58.3 ac) in South Florida were performed using the Soil Conservation Service (SCS) hydrology method and empirical equations developed by the U.S. Environmental Protection Agency (EPA). Each site had different predominant land uses (i.e., low density residential, high density residential, highway and commercial). Quantity and quality data from 95 storm events at these sites were measured by the U.S. Geological Survey (USGS), and used for calibration of the methodology to derive appropriate input parameters. Calibrated input parameters were developed for each land use to test the applicability of the methodology in small sub-tropical urban watersheds, and to provide hydrologists with a way to select appropriate parameter values for planning studies. A total of 16 independent rainfall events were used for verification of the methodology. Comparisons of predicted versus measured data for both hydrographs and pollutant loadings were performed.     

MODEL ACCURACY IN SNOWMELT-RUNOFF FORECASTS EXTENDING FROM 1 TO 20 DAYS1

ABSTRACT: This paper examines the performance of snowmelt-runoff models in conditions approximating real-time forecast situations. These tests are one part of an intercomparison of models recently conducted by the World Meteorological Organization (WMO). Daily runoff from the Canadian snowmelt basin Illecille. waet (1155 km², 509–3150 m a.s.l.) was forecast for 1 to 20 days ahead. The performance of models was better than in a previous WMO project, which dealt with runoff simulations from historical data, for the following reasons: (1) conditions for models were more favorable than a real-time forecast situation because measured input data and not meteorological forecast inputs were distributed to the modelers; (2) the selected test basin was relatively easy to handle and familiar from the previous WMO project; and (3) all kinds of updating were allowed so that some models even improved their accuracy towards longer forecast times. Based on this experience, a more realistic follow-up project can be imagined which would include temperature forecasts and quantitative precipitation forecasts instead of measured data.     

ECONOMICS OF SCREENING FOR PESTICIDES IN GROUND WATER1

ABSTRACT: In the United States, millions of dollars are currently spent to monitor water quality for a whole suite of organic compounds. However, results of several surveys conducted in the past decade indicate that only a few pesticides occur in a small proportion of wells. Screening methods based on historical evidence of contamination patterns and knowledge of the locales will have significant potential to reduce these costs and effectively identify contamination problems. In this paper, the economics of utilizing two screening methods, sequential analysis and sample compositing, in the design of monitoring strategies is captured In the form of mathematical models and illustrated for a state-level monitoring program. When the two methods are adopted, the total analytical cost to conclusively identify contaminated wells in a network of 4,000 wells is shown to range from $12,500 to $1,575,000 depending on the extent of contamination. In contrast, the total analytical cost of a conventional program where all the wells in the network are sampled and tested for a standard suite of pesticides at a cost of $250/sample is one million dollars. Given such wide range in costs, it is prudent to incorporate the screening concepts presented in this paper in the development of cost-effective monitoring programs.     

ESTIMATING THE PROBABILITY OF EXCEEDING GROUNDWATER QUALITY STANDARDS1

ABSTRACT: A model for estimating the probability of exceeding groundwater quality standards at environmental receptors based on a simple contaminant transport model is described. The model is intended for locations where knowledge about site-specific hydrogeologic conditions is limited. An efficient implementation methodology using numerical Monte Carlo simulation is presented. The uncertainty in the contaminant transport system due to uncertainty in the hydraulic conductivity is directly calculated in the Monte Carlo simulations. Numerous variations of the deterministic parameters of the model provide an indication of the change in exceedance probability with change in parameter value. The results of these variations for a generic example are presented in a concise graphical form which provides insight into the topology of the exceedance probability surface. This surface can be used to assess the impact of the various parameters on exceedance probability.     

PREDICTING TEMPORAL AND SPATIAL FLOOD DYNAMICS USING A PRECALIBRATED MODEL1

ABSTRACT: A large storm in December 1990 allowed the evaluation of flood predictions from a hydrologic model (TOPMODEL) that had been previously calibrated on the West Fork of Walker Branch Watershed, a gauged 37.5 ha catchment near Oak Ridge, Tennessee. The model predicts both hydrograph dynamics and the spatial distribution of overland flow using an index based on topography. Maximum extent of overland flow during the storm was determined from patterns of leaf litter removal from valley bottoms. Both the flood hydrograph and the extent of overland flow were accurately predicted using model parameters obtained from a three-month period of normal flow conditions during 1983.     

REGIONAL SCALE TREND MONITORING OF INDICATORS OF TROPHIC CONDITION OF LAKES1

ABSTRACT: The U.S. Environmental Protection Agency has proposed a sample survey design to answer questions about the ecological condition and trends in condition of U.S. ecological resources. To meet the objectives, the design relies on a probability sample of the resource population of interest (e.g., a random sample of lakes) each year on which measurements are made during an index period. Natural spatial and temporal variability and variability in the sampling process all affect the ability to describe the status of a population and the sensitivity for trend detection. We describe the important components of variance and estimate their magnitude for indicators of trophic condition of lakes to illustrate the process. We also describe models for trend detection and use them to demonstrate the sensitivity of the proposed design to detect trends. If the variance structure that develops during the probability surveys is like that synthesized from available databases and the literature, then the trends in common indicators of trophic condition of the specified magnitude should be detectable within about a decade for Secchi disk transparency (0.5–1 percentiyear) and total phosphorus (2–3 percent/year), but not for chlorophyll-a (> 3–4 percent/year), which will take longer.     

ALAWAT: A spatially allocated watershed model for approximating stream,sediment, and pollutant flows in Hawaii,USA

The Ala Wai Canal Watershed Model (ALAWAT) is a planning-level watershed model for approximating direct runoff, streamflow, sediment loads, and loads for up to five pollutants. ALAWAT uses raster GIS data layers including land use, SCS soil hydrologic groups, annual rainfall, and subwatershed delineations as direct model parameter inputs and can use daily total rainfall from up to ten rain gauges and streamflow from up to ten stream gauges. ALAWAT uses a daily time step and can simulate flows for up to ten-year periods and for up to 50 subwatersheds. Pollutant loads are approximated using a user-defined combination of rating curve relationships, mean event concentrations, and loading/washoff parameters for specific subwatersheds, land uses, and times of year. Using ALAWAT, annual average streamflow and baseflow relationships and urban suspended sediment loads were approximated for the Ala Wai Canal watershed (about 10,400 acres) on the island of Oahu, Hawaii. Annual average urban suspended sediments were approximated using two methods: mean event concentrations and pollutant loading and washoff. Parameters for the pollutant loading and washoff method were then modified to simulate the effect of various street sweeping intervals on sediment loads.     

MODELING THE EFFECT OF BRUSH CONTROL ON RANGELAND WATER YIELD1

ABSTRACT: With the increase in water demand in Texas, attention has turned to improving water yield by brush control on rangeland watersheds. Several hydrologic models have been developed for either farmland or rangeland. However, none of the models were specifically developed to assess the impact of brush control on rangeland water yield. Yet, modeling the impact of brush control on water yield needs to be considered if alternative techniques are to be compared. Two models, Ekalaka Rangeland Hydrology and Yield Model (ERHYM-II) and Simulator for Water Resources on Rural Basins (SWRRB) were selected. The Soil Conservation Service curve number (SCS-CN) method is used in both models to predict surface runoff from each rainfall event. The major differences between the ERHYM-II and SWRRB models are the evapotranspiration, soil water routing, and plant growth components. The models were evaluated on brush-dominated and chemically and mechanically brush-controlled range watersheds in Texas. Results indicated that both models were capable of simulating soil water and water yield from brush dominated and chemically brush-controlled range watersheds. The models were not able to predict water yield from the mechanically brush-controlled (root plowed) watershed with acceptable accuracy. The depressions that were caused by root plowing stored surface runoff and reduced water yield from the watershed. Information about the size of depressions was not available for further model evaluation.     

FOURIER INFERENCE: SOME METHODS FOR THE ANALYSIS OF ARRAY AND NONGAUSSIAN SERIES DATA1

Fourier inference is a collection of analytic techniques and philosophic attitudes, for the analysis of data, wherein essential use is made of empirical Fourier transforms. This paper sets down some basic results concerning the finite Fourier transforms of stationary process data and then, to illustrate the approach, uses those results to develop procedures for: 1) estimating cloud and storm motion, 2) passive sonar and 3) fitting finite parameter models to nonGaussian time series via bispectral fitting. This last procedure is illustrated by an analysis of a stretch of Mississippi River runoff data. Examples 1), 2) refer to data having the form Y(x_j, y_j, t) for j = 1, …, J and t = 0, …, T-l say, and view that data as part of a realization of a spatial-temporal process. Such data has become common in geophysics generally and in hydrology particularly. The goal of this paper is to present some new statistical procedures pertinent to problems in the water sciences, equally it is to illustrate the genesis of those procedures and how their properties may be approximated.     

THERMAL AND DISSOLVED OXYGEN CHARACTERISTICS OF A SOUTH CAROLINA COOLING RESERVOIR1

ABSTRACT: Temperature and dissolved oxygen concentrations were measured monthly from January 1971 to December 1982 at 1-m depth intervals at 13 stations in Keowee Reservoir in order to characterize spatial and temporal changes associated with operation of the Oconee Nuclear Station. The reservoir water column was i to 4°C warmer in operational than in non-operational years. The thermo-dine was at depths of 5 to 15 m before the operation of Oconee Nuclear Station, but was always below the upper level of the intake (20 m) after the station was in full operation; this suggests that pumping by the Oconee Nuclear Station had depleted all available cool hypolimnetic water to this depth. As a result summer water temperatures at depths greater than 10 m were usually 10°C higher after plant operation began than before. By fall the reservoir was nearly homothemious to a depth of 27 m, where a thermocine developed. Seasonal temperature profiles varied with distance from the plant; a cool water plume was evident in spring and a warm water plume was present in the summer, fall, and winter. A cold water plume also developed in the northern section of the reservoir due to the operation of Jocassee Pumped Storage Station. Increases in the mean water temperature of the reservoir during operational periods were correlated with the generating output of the power plant. The annual heat load to the reservoir increased by one-third after plant operations began. The alteration of the thermal stratification of the receiving water during the summer also caused the dissolved oxygen to mix to greater depths.