POTENTIAL PHOSPHORUS LOAD REDUCTIONS UNDER THE LAKE OKEECHOBEE REGULATORY PROGRAM1

ABSTRACT: Nutrient loading from beef pastures located within the northern Lake Okeechobee watershed in Florida, has been identified as a source of phosphorus contributing to the accelerated eutrophication of the lake. Since 1989 within the watershed, 557 agricultural drainage sites, mainly beef pasture, have been monitored for compliance under a regulatory program. Of those sites, 154 were actively monitored for phosphorus concentrations from October 1, 1998, to September 30, 1999. Of these 154 sites, 77 were considered to be out of compliance (OOC). An OOC site is defined as having runoff with a 12‐month average phosphorus concentration exceeding the permitted discharge limit. The average annual phosphorous load from the 77 OOC sites for an eight‐year study period from October 1, 1991, to September 30, 1999, was estimated using measured concentration values and simulated runoff obtained from an agricultural nonpoint source pollution model, CREAMS‐WT. The 77 OOC sites produced an estimated average annual 46 metric tonnes of phosphorus load, of which an estimated 22 tonnes of phosphorus reached Lake Okeechobee on an average annual basis. The remaining estimated average annual 24 tonnes of phosphorus load was retained by streams and wetlands in the discharge transport system between the sites and the lake. The estimated average annual load reaching Lake Okeechobee from the OOC sites represented 11 percent of the phosphorus load above a five‐year average annual target load for the lake. However, the OOC site drainage areas represented only 3 percent of the northern watershed that drains into the lake. Of the 77 OOC sites, 12 sites had an average annual phosphorus loading rate equal to or greater than 3.0 kg/ha and were placed on the priority list for the Critical Restoration Project in the Lake Okeechobee watershed. To estimate the possible phosphorus load reductions from the 77 sites, two scenarios were modeled. The first scenario reduced phosphorus concentrations in runoff to the permitted discharge limits under the Lake Okeechobee regulatory program. The second scenario changed current land uses to native rangeland with an estimated annual offsite total phosphorus areal loading rate of 0.114 kg/ha. These two scenarios are hypothetical with assumed concentration values and loading rate. Model results showed that the first management scenario reduced the average annual phosphorus load to the lake by an estimated 15 tonnes. The second scenario reduced the average annual phosphorus load to the lake by an estimated 21 tonnes.     

USE OF THE DELPHI METHOD IN RESOLVING COMPLEX WATER RESOURCES ISSUES1

ABSTRACT: The tri‐state river basins, shared by Georgia, Alabama, and Florida, are being modeled by the U.S. Fish and Wildlife Service and the U.S. Army Corps of Engineers to help facilitate agreement in an acrimonious water dispute among these different state governments. Modeling of such basin reservoir operations requires parallel understanding of several river system components: hydropower production, flood control, municipal and industrial water use, navigation, and reservoir fisheries requirements. The Delphi method, using repetitive surveying of experts, was applied to determine fisheries' water and lake‐level requirements on 25 reservoirs in these interstate basins. The Delphi technique allowed the needs and requirements of fish populations to be brought into the modeling effort on equal footing with other water supply and demand components. When the subject matter is concisely defined and limited, this technique can rapidly assess expert opinion on any natural resource issue, and even move expert opinion toward greater agreement.     

EVALUATION OF HYDROLOGIC BENEFITS OF INFILTRATION BASED URBAN STORM WATER MANAGEMENT1

ABSTRACT: As watersheds are urbanized, their surfaces are made less pervious and more channelized, which reduces infiltration and speeds up the removal of excess runoff. Traditional storm water management seeks to remove runoff as quickly as possible, gathering excess runoff in detention basins for peak reduction where necessary. In contrast, more recently developed “low impact” alternatives manage rainfall where it falls, through a combination of enhancing infiltration properties of pervious areas and rerouting impervious runoff across pervious areas to allow an opportunity for infiltration. In this paper, we investigate the potential for reducing the hydrologic impacts of urbanization by using infiltration based, low impact storm water management. We describe a group of preliminary experiments using relatively simple engineering tools to compare three basic scenarios of development: an undeveloped landscape; a fully developed landscape using traditional, high impact storm water management; and a fully developed landscape using infiltration based, low impact design. Based on these experiments, it appears that by manipulating the layout of urbanized landscapes, it is possible to reduce impacts on hydrology relative to traditional, fully connected storm water systems. However, the amount of reduction in impact is sensitive to both rainfall event size and soil texture, with greatest reductions being possible for small, relatively frequent rainfall events and more pervious soil textures. Thus, low impact techniques appear to provide a valuable tool for reducing runoff for the events that see the greatest relative increases from urbanization: those generated by the small, relatively frequent rainfall events that are small enough to produce little or no runoff from pervious surfaces, but produce runoff from impervious areas. However, it is clear that there still needs to be measures in place for flood management for larger, more intense, and relatively rarer storm events, which are capable of producing significant runoff even for undeveloped basins.     

GIS BASED LONG TERM HYDROLOGIC IMPACT EVALUATION FOR WATERSHED URBANIZATION1

ABSTRACT: To adequately manage impacts of ongoing or future land use changes in a watershed, the magnitude of their hydrologic impacts needs to be assessed. A grid based daily streamflow model was calibrated with two years of observed streamflow data, using time periods when land use data are available and verified by comparison of model predictions with observed streamflow data. Streamflow data were separated into direct runoff and baseflow to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from 30 years of simulation results and the change in these ratios with urbanization shows that estimated annual direct runoff increased from 49.2 percent (1973) to 63.1 percent (1984) and 65.0 percent (1991), indicating the effects of urbanization are greater on direct runoff than on total runoff. The direct runoff ratio also varies with annual rainfall, with dry year ratios larger than those for wet years. This suggests that the impact of urbanization on areas that are sensitive to runoff ratios, such as stream ecosystems, might be more serious during drier years than in wetter years in terms of water quality and water yield. This indicates that sustainable base‐flow is important to maintaining sound stream ecosystems.     

WATERSHED OPTIMIZATION OF AGRICULTURAL BEST MANAGEMENT PRACTICES: CONTINUOUS SIMULATION VERSUS DESIGN STORMS1

ABSTRACT: Nonpoint source (NPS) models and expert opinions are often used to prescribe best management practices (BMPs) for controlling NPS pollution. An optimization algorithm (e.g., a genetic algorithm, or GA) linked with a NPS model (e.g., Annualized AGricultural Nonpoint Source pollution model, or AnnAGNPS), can be used to more objectively prescribe BMPs and to optimize NPS pollution control measures by maximizing pollutant reduction and net monetary return from a watershed. Pollutant loads from design storms and annual loads from a continuous simulation can both be used for optimizing BMP schemes. However, which strategy results in a better solution (in terms of providing water quality protection) for a watershed is not clear. The specific objective of the study was to determine the differences in watershed pollutant loads, in an experimental watershed in Pennsylvania, resulting from optimization analyses performed using pollutant loads from a series of five 2‐yr 24‐hr storm events, a series of five 5‐yr 24‐hr storm events, and cumulative pollutant loads from a continuous simulation of five years of weather data. For each of these three different event alternatives, 100 near optimal solutions (BMP schemes) were generated. Sediment (Sed), sediment nitrogen (SedN), dissolved N (SolN), sediment organic carbon (SedOC), and sediment phosphorus (SedP) loads from a different five‐year period (an evaluation period) suggest that the optimal BMP schemes resulting from the use of annual cumulative pollutant loads from a continuous simulation of five years of weather data provide smaller cumulative NPS pollutant loads at the watershed outlet.     

DEVELOPMENT OF A FRACTURED MEDIUM FLOW MODEL FOR A WASTE SITE1

ABSTRACT: A three‐dimensional fractured medium flow model was developed for the Bear Creek Valley (BCV) S‐3 site of the Oak Ridge Reservation (ORR) using SWIFT III. The numerical modeling for this site focused on a conceptual model established through the analysis of heterogeneous geologic units and matrix fracture properties of the subsurface in the BCV area. The SWIFT III modeling analysis was based on the previous modeling studies that used MODFLOW and MODPATH. A rigorous calibration was obtained first by comparing simulated results with the existing data on ground water levels and then by comparing pumping test results with the simulated ground water levels. A satisfactory agreement between observed and simulated results was obtained. The calibrated model was used to determine sustained yield from a ground water interceptor trench. Different withdrawal rates were used to simulate the performance of the trench for the sustained withdrawal of ground water.     

DEVELOPMENT OF LARGE SCALE GRIDDED RIVER NETWORKS FROM VECTOR STREAM DATA1

ABSTRACT: The Network Tracing Method (NTM) has been developed to determine gridded coarse river networks for modeling large hydrologic systems. For a coarse resolution grid, the NTM determines the downstream cell of each cell and the distance along the actual meandering flow paths between them. Unlike previously developed methods, the NTM uses fine resolution vector river networks as the source of information of the flow patterns rather than digital elevation models. The main advantage of using vector river networks as input is that they capture the hydrologic terrain features better than topographic data do, particularly in areas of low topographic relief. The NTM was applied to South America with a grid resolution of 1 degree by 1 degree and to the globe with a resolution of 2.815 degrees by 2.8125 degrees. Overall, the method captured the flow patterns well. Generated digital river networks and drainage divides showed minor disagreement with those obtained from existing maps, and most of them were consistent with the resolution of the coarse river network. The majority of estimated basin areas were also close to documented values. River lengths calculated with the NTM, however, were consistently underpredicted.     

MODELING FRAMEWORK FOR MANAGING COPPER RUNOFF IN URBAN WATERSHEDS1

ABSTRACT: A modeling framework was developed for managing copper runoff in urban watersheds that incorporates water quality characterization, watershed land use areas, hydrologic data, a statistical simulator, a biotic ligand binding model to characterize acute toxicity, and a statistical method for setting a watershed specific copper loading. The modeling framework is driven by export coefficients derived from water quality parameters and hydrologic inputs measured in an urban watershed's storm water system. This framework was applied to a watershed containing a copper roof built in 1992. A series of simulations was run to predict the change in receiving stream water chemistry caused by roof aging and to determine the maximum copper loading (at the 99 percent confidence level) a watershed could accept without causing acute toxicity in the receiving stream. Forecasting the amount of copper flux responsible for exceeding the assimilation capacity of a watershed can be directly related to maximum copper loadings responsible for causing toxicity in the receiving streams. The framework developed in this study can be used to evaluate copper utilization in urban watersheds.     

生物质热解的动力学补偿效应

基于对8种中国生物质材料非等温热分解的实验结果和动力学分析，发现分别源于生物质样品变动和动力学模型变动的表现热解动力学参数，即表观活化能E和指前因子A，满足动力学补偿效应关系。详细讨论了鉴别真，假动力学补偿效应的定量统计判据。     

碳达峰国家达峰特征与启示

基于世界银行数据库1960～2020年数据,采用Mann-Kendall(MK)检验和Spearman's Rho(SR)检验,对全球219个国家及地区的CO2排放及社会经济数据进行趋势分析.结果表明:MK检验和SR检验得出一致结论,共有42个国家和1个经济体联盟实现碳达峰,46个国家处于碳达峰平台期.多数国家碳达峰时...