国际土地利用/覆盖变化模型研究综述

国际上对土地利用/覆盖变化的研究由来已久,近年由于土地利用/覆盖变化对全球变化的贡献及响应,预测土地利用/覆盖变化成为必然。由此,越来越多的科学家致力于研究土地利用/覆盖变化模型,并取得了积极进展。论文介绍了目前国际上土地利用/覆盖变化模型的一些相关问题:①土地利用/覆盖变化模拟的尺度依赖性;②土地利用/覆盖变化模拟的数据问题;③预测土地利用/覆盖变化的位置与数量。回顾了已有的5种主要的土地利用/覆盖变化模型:①基于行为者的土地利用/覆盖变化模型;②经验统计模型;③最优化模型;④混合/综合模型;⑤动力模拟模型。最后总结了现有模型中存在的问题,并探讨了今后土地利用/覆盖变化模型发展的方向。     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

城市复合生态系统碳氧平衡分析——以沿海城市厦门为例

通过综合城市复合生态系统内社会经济活动的主要排碳、耗氧行为,以及城市区域内湿地、淡水、海洋、森林和农田5种遗留自然生态系统的固碳释氧功能,构建了城市碳氧平衡分析模型（UCOB）,并估算了城市社会经济活动和城市中自然生态系统的碳氧收支,对城市生态系统平衡状况进行定量化指征.最后,以中国东南沿海城市厦门为例进行研究.结果显...     

资源型城市环境库兹涅茨曲线研究——基于面板数据的实证分析

论文以47个地级资源型城市为研究对象,利用2003-2009年的面板数据,运用环境库兹涅茨曲线(EKC)模型,以工业烟尘、工业废水和工业SO₂为例对其环境污染与经济增长的关系进行了实证研究。结果表明:资源类型影响资源型城市EKC的形状与转折点,同种污染物在不同资源型城市的曲线不完全相同,转折点在污染较重的资源型城市及人均GDP较低的资源型城市出现更早;资源型城市的EKC与全国的EKC不完全相同,相同的曲线下资源型城市的转折点出现更早。基于此,论文提出资源型城市应积极进行环境治理、实施绿色转型、大力发展循环经济、扩大实施总量控制的污染物范围,以促进这些城市的可持续发展。     

Identical full-scale biogas-lift reactors (BLRs) with anaerobic granular sludge and residual activated sludge for brewery wastewater treatment and kinetic modeling

Two identical full-scale biogas-lift reactors treating brewery wastewater were inoculated with different types of sludge to compare their operational conditions, sludge characteristics, and kinetic models at a mesophilic temperature. One reactor （R1） started up with anaerobic granular sludge in 12 weeks and obtained a continuously average organic loading rate （OLR） of 7.4 kg chemical oxygen demand （COD）/（m3.day）, COD removal efficiency of 80%, and effluent COD of 450 mg/L. The other reactor （R2） started up with residual activated sludge in 30 weeks and granulation accomplished when the reactor reached an average OLR of 8.3 kg COD/（m^3·day）, COD removal efficiency of 90%, and effluent COD of 240 mg/L. Differences in sludge characteristics,biogas compositions, and biogas- lift processes may be accounted for the superior efficiency of the treatment performance of R2 over R1. Grau second-order and modified StoverKincannon models based on influent and effluent concentrations as well as hydraulic retention time were successfully used to develop kinetic parameters of the experimental data with high correlation coefficients （R2 〉 0.95）, which further showed that R2 had higher treatment performance than R1. These results demonstrated that residual activated sludge could be used effectively instead of anaerobic granular sludge despite the need for a longer time.     

传统活性污泥法COD去除及脱氮改造的模拟

活性污泥模型方法正逐渐成为废水处理工程领域科学研究、工艺设计和过程控制的一种重要手段。以国际水质协会的活性污泥1号模型（ASM1为基础，以MATLAB为工具开发模拟软件，对模型进行了校核与验证。模拟了重庆市唐家桥污水处理厂COD和含N组分的降解过程，研究了有机物负荷、流量、温度和溶解氧浓度变化对出水COD、氨氮、硝态氮和总氮的影响。利用所开发的模拟程序对唐家桥污水处理厂的脱氮改造方案进行了优化，并预测了改造后的处理效果。     

紫外活化过硫酸盐降解磷酸氯喹

以抗新型冠状肺炎药物——磷酸氯喹（CQP）为研究对象,考察其在紫外活化过硫酸盐体系（UV/PS）中的降解效果.通过竞争动力学实验,确定了CQP与羟基自由基（HO·）和硫酸根自由基（SO₄^-·）的二级反应速率常数,同时考察了PS浓度、pH和常见无机阴离子对UV/PS体系中CQP降解的影响,并通过建立动力学模型预测CQP浓度和主要自由基浓度以探究其影响机制.结果表明,UV/PS体系对CQP的降解效果显著优于单一UV、单一太阳光或单一PS体系,在10 min内可降解91.3%的CQP;在pH为6.9的条件下,CQP与HO·和SO₄^-·的二级反应速率常数分别为8.9×10⁹ L·（mol·s）^-1和1.4×10¹⁰ L·（mol·s）^-1,其中SO₄^-·是主要活性物种;CQP的降解速率随PS浓度增加而增大,HCO₃^-和Cl^-的加入对UV/PS体系中CQP的去除起到抑制作用,碱性较强的条件不利于CQP的转化.经LC-MS分析,发现CQP在UV/PS体系中主要经过N-脱乙基化、C—N键断裂和抽氢等反应被逐步降解为其他有机中间产物.加大PS浓度和pH可提高其矿化率.此研究可为抗新冠肺炎医药废水的处理提供帮助.     

高动态离心机系统建模与仿真

高动态离心机是用于惯性部组件测试和考核的动态惯导测试设备,通过主轴变速旋转或改变仪器舱到主轴的距离等方式,在仪器舱内产生快速变化的加速度场,从而模拟部件或组件使用时的加速度环境。以某高动态离心机研制为背景,介绍了该设备的系统建模与仿真过程。通过在Simulink仿真平台上对设备机械系统、电机调速系统和系统扰动因素等模块化建模和时域仿真,预测了设备在不同设计参数和不同扰动条件下的时域动态特性,为系统设计和优化提供了详实完备的仿真数据支持。     

数据清洗对污水处理厂生物建模可靠性影响研究

为应对污水处理厂出水水质要求的不断提升,通过生物建模技术降低污水处理厂碳源、除磷药剂投加量,实现达标排放同时降低运营成本已成为必要手段.然而,数据质量是影响模型可靠性的关键因素.为提高建模数据质量,本研究在生物建模过程中提出了系统性3步清洗方法：统计分析法标定可疑数据;物料平衡计算法剔除大误差并闭合流量平衡;污泥特征分析法修正污泥组分.应用该方法成功对天津宁河芦台桥北污水处理厂2019年1—7月历史水质数据、SCADA在线流量数据及补充采集的3日水质数据实现有效的清洗,并完成基于Biowin-ASDM活性污泥模型的生物建模案例研究.通过与直接利用原始数据进行模拟拟合的对比结果表明,应用清洗后的数据进行建模可有效提升模型可靠性,不但校正参数趋于合理,更可实现生化段主要污染物TSS、TCOD、TN、TP去除率的模拟误差≤3%.     

PM2.5 source apportionment in a French urban coastal site under steelworks emission influences using constrained non-negative matrix factorization receptor model

The constrained weighted-non-negative matrix factorization(CW-NMF) hybrid receptor model was applied to study the influence of steelmaking activities on PM_(2.5)(particulate matter with equivalent aerodynamic diameter less than 2.5 μm) composition in Dunkerque,Northern France. Semi-diurnal PM_(2.5)samples were collected using a high volume sampler in winter 2010 and spring 2011 and were analyzed for trace metals, water-soluble ions, and total carbon using inductively coupled plasma – atomic emission spectrometry(ICP-AES),ICP- mass spectrometry(ICP-MS), ionic chromatography and micro elemental carbon analyzer. The elemental composition shows that NO_3~-, SO_4~(2-), NH_4~+and total carbon are the main PM_(2.5)constituents. Trace metals data were interpreted using concentration roses and both influences of integrated steelworks and electric steel plant were evidenced. The distinction between the two sources is made possible by the use Zn/Fe and Zn/Mn diagnostic ratios. Moreover Rb/Cr, Pb/Cr and Cu/Cd combination ratio are proposed to distinguish the ISW-sintering stack from the ISW-fugitive emissions. The a priori knowledge on the influencing source was introduced in the CW-NMF to guide the calculation. Eleven source profiles with various contributions were identified: 8 are characteristics of coastal urban background site profiles and 3 are related to the steelmaking activities. Between them,secondary nitrates, secondary sulfates and combustion profiles give the highest contributions and account for 93% of the PM_(2.5)concentration. The steelwork facilities contribute in about 2%of the total PM_(2.5)concentration and appear to be the main source of Cr, Cu, Fe, Mn, Zn.