固定化果胶酶抑制铜绿微囊藻生长研究

为证实固定化果胶酶抑制蓝藻生长的作用,在实验室条件下,以铜绿微囊藻（Microcystis aeruginosa）为受试藻种,用共培养法观察了固定化果胶酶对藻细胞群体的作用、用电镜观察了共培养后藻细胞的损伤状况,测定了对其生理生化特征的影响.结果表明固定化果胶酶与藻共培养液第3 d明显黄化,且黄化程度与固定化果胶酶的用量和培养时间呈正相关系;电镜照片显示固定化果胶酶对藻细胞有损伤作用,轻微损伤的藻细胞出现质壁分离,表面粗糙、凸凹不平,形状不规则,严重损伤的藻细胞表面发生深度皱缩或细胞结构完全解体;随着固定化果胶酶与铜绿微囊藻共培养时间的延长,藻细胞生长量、叶绿素a含量显著降低,表明藻细胞受到胁迫和伤害,藻细胞正常的光合作用受到严重影响.丙二醛（MDA）值显示藻细胞抗氧化防御体系被破坏,细胞内发生严重膜脂过氧化.固定化果胶酶能有效抑制铜绿微囊藻细胞的生长,铜绿微囊藻生长抑制率可高达96%.     

染料废水处理技术现状与发展

介绍了染料废水的物理、化学和生物处理技术,分析了其去除原理和工艺优缺点,提出了未来染料废水处理技术的发展走向——高效、经济、适应性强、清洁性的废水处理技术。     

UV/H_2O_2/草酸高铁铵体系中孔雀石绿的光降解研究

研究了UV/H2O2/草酸高铁铵体系下孔雀绿(Malachite green,MG)光降解过程中的影响因素,包括MG的初始浓度、初始pH值、投加H2O2浓度和草酸高铁铵浓度等。结果表明:MG初始浓度越低光降解越快,碱性条件有利于MG的降解,其最佳降解pH为11.0;随H2O2浓度的增加,MG降解率先增加后减少,在100mmol/L时,降解率最高;MG降解率随草酸高铁铵浓度增加而增加,于10.0mmol/L时MG降解率最高;UV/H2O2/草酸高铁铵体系的降解效果较强,交叉实验结果表明H2O2:草酸高铁铵浓度比在1～20:1时降解率均高于。因此该体系具有快速、简单、经济并高效率等特点,可应用于染料废水的降解和脱色工艺中。     

邻苯二甲酸二丁酯暴露对雄性大鼠生精细胞功能影响

观察不同剂量的邻苯二甲酸二丁酯(DBP)对成年大鼠生精细胞损伤、端粒酶和端粒酶逆转录酶(TERT)表达影响.对40只健康雄性SD大鼠随机分成4组,分别为500mg·kg-1·d-1、250mg·kg-1·d-1、50mg·kg-1·d-1 3个染毒组和1个对照组,灌胃量为5mL·kg-1体重,灌胃法连续给药6周.对体重...     

两类微生物燃料电池治理硝酸盐废水的实验研究

采用二氧化铅阴极单室微生物燃料电池(MFC)和双室MFC,以葡萄糖为唯一电子供体,系统研究了两类微生物燃料电池的产电性能和去除硝酸盐的情况.结果表明,双室MFC闭合后,阳极室降解葡萄糖产生的电子可通过外电路传递到阴极,在生物的作用下,NO3--N得到电子被还原,平均反硝化速率达3.77 mg·L-1·d-1.双室MFC...     

以预处理剩余污泥为燃料MFC产电性能及不连续供电的可行性

为探讨微生物燃料电池(microbial fuel cell,MFC)处理经预处理后剩余污泥的可行性以及不连续供电能力,采用双室MFC,以剩余污泥热处理上清液为基质进行启动和运行,通过改变电池阴极电子受体而导致电势差变化来监测其产电的运行稳定性.结果表明,反应器以氧气作为阴极电子受体148 h后启动成功,最大输出电压0.24 V,将阴极电子受体换为铁氰化钾时,能获得0.66 V的最大输出电压和4.21 W·m~(-3)的最大功率密度.当将阴极电子受体分别替换为氧气或者开路,又转换为铁氰化钾后,电池输出功率恢复迅速,电池对有机物去除效率基本不受影响,对化学需氧量(COD)、氨氮去除效率分别达70%和80%.本研究表明,利用预处理剩余污泥进行MFC处理和产电是可行的,可获得较高的功率密度,同时MFC可以实现不连续供电.     

微生物燃料电池恒电流预培养阳极生物膜分析表征

阳极性能是影响微生物燃料电池(Microbial Fuel Cells,MFCs)性能的关键因素之一,同时阳极的接种挂膜过程是影响微生物燃料电池启动效率的关键因素.因此,本课题组提出了预培养阳极作为微生物燃料电池的一种新型阳极的概念,在三电极体系下,通过外加恒定电流预培养阳极,在不同条件下对阳极表面进行电化学选择和生物膜驯化以丰富生物膜结构和厚度.结果表明,阳极的性能与预培养电流大小密切相关,预培养阳极CF-4i(外加4 A·m-2电流密度)通过循环伏安法、塔菲尔曲线、电化学阻抗谱测试,性能好于其他测试组及对照组,装配阳极CF-4i的微生物燃料电池能实现最大功率密度968.20 m W·m-2,是对照组的2.53倍.同时,通过共聚焦显微镜观察发现,生物膜大体分两层,外层的活细胞及内层的死细胞,外层活细胞长在内层死细胞之上.这种结构分布表明,阳极生物膜中的活细胞部分绝大多数都分布于生物膜的外侧,而不是均布于整个阳极生物膜中;同时这也表明不是整个阳极生物膜都具有新陈代谢活性,但死亡的细胞可以继续积累在电极表面附近,活的外层膜负责电流的产生,而内层的死细胞作为一种导电基质.     

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.