基于FDS的加油站便利店火灾模拟

为了研究加油站便利店火灾的发展规律,选择合理的疏散路线,使用 FDS软件对某加油站便利店进行火灾数值模拟。通过观察烟气扩散和动态升温过程,分析便利店的烟气扩散和升温规律,对比分析不同疏散路线上温度、烟气层高度和能见度的数据变化规律,分析选择不同疏散路线对人员安全疏散的影响。结果表明:在无火灾报警设备的情况下,卫生间等有隔断的设施会延迟设施内人员获得火灾信息的时间,不利于安全疏散;同等高度下靠墙区域受高温烟气影响较中央开阔区域更大;疏散时选择合理的疏散路线可以显著延长安全疏散时间。     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

A Comprehensive Python Toolkit for Accessing High‐Throughput Computing to Support Large Hydrologic Modeling Tasks

The National Flood Interoperability Experiment (NFIE) was an undertaking that initiated a transformation in national hydrologic forecasting by providing streamflow forecasts at high spatial resolution over the whole country. This type of large‐scale, high‐resolution hydrologic modeling requires flexible and scalable tools to handle the resulting computational loads. While high‐throughput computing (HTC) and cloud computing provide an ideal resource for large‐scale modeling because they are cost‐effective and highly scalable, nevertheless, using these tools requires specialized training that is not always common for hydrologists and engineers. In an effort to facilitate the use of HTC resources the National Science Foundation (NSF) funded project, CI‐WATER, has developed a set of Python tools that can automate the tasks of provisioning and configuring an HTC environment in the cloud, and creating and submitting jobs to that environment. These tools are packaged into two Python libraries: CondorPy and TethysCluster. Together these libraries provide a comprehensive toolkit for accessing HTC to support hydrologic modeling. Two use cases are described to demonstrate the use of the toolkit, including a web app that was used to support the NFIE national‐scale modeling.     

某典型化工污染场地土壤修复方案研究

以典型化工污染场地为研究对象,构建适合该场地的修复技术筛选体系,筛选最佳修复方法。根据特征污染筛选结果、场地修复目标及业主需求等因素,通过室内模拟实验、施工现场微调等方法,确定污染场地最优修复方案。结果表明,作为Cd、苯并[a]芘复合污染场地,根据筛选体系结合Topsis法进行评估,确定场地修复技术为异位化学淋洗。运用响应曲面法,采用BoxBehnken设计多因素实验进行室内模拟,确定最佳修复条件。采用0.6mol/L柠檬酸与20g/Lβ-环糊精进行复配的淋洗剂,在pH=3.0、淋洗温度35.00℃、液固比(淋洗剂与土壤的体积质量比)6.00mL/g、搅拌强度320.00r/min下,淋洗4次,每次淋洗3.4h,对某化工污染场地进行修复,修复后土壤中Cd、苯并[a]芘的去除量分别为69.88、39.20mg/kg,去除率分别达80.14%、70.50%,达到预期修复目标。     

SCR脱硝系统烟道内流场优化

为了改善选择性催化还原法(SCR)催化剂上游烟气的流场、温度场和浓度场分布,基于CFD仿真分析技术,建立了整个脱硝系统三维模型,并通过优化导流板及整流格栅,使得速度标准偏差、浓度标准偏差、温度偏差、速度偏转角以及压降等性能指标都满足设计要求,在满足脱硝效率和氨逃逸率前提下,大大降低了烟气对催化剂层的冲刷,保证催化剂的使用寿命。最后,为了合理布置吹灰器,对优化结构下粉尘颗粒在烟道内的运动情况进行了仿真分析研究,为设计提供了依据。     

Pesticide residue dynamics in passion fruits: Comparing field trial and modelling results

We evaluated the exposure to pesticides from the consumption of passion fruits and subsequent human health risks by combining several methods: (i) experimental field studies including the determination of pesticide residues in/on passion fruits, (ii) dynamic plant uptake modelling, and (iii) human health risk assessment concepts. Eight commonly used pesticides were applied onto passion fruits cultivated in Colombia. Pesticide concentrations were measured periodically (between application and harvest) in whole fruits and fruit pulp. Measured concentrations were compared with predicted residues calculated with a dynamic and crop-specific pesticide uptake model, namely dynamiCROP. The model accounts for the time between pesticide application and harvest, the time between harvest and consumption, the amount of spray deposition on plant surfaces, uptake processes, dilution due to crop growth, degradation in plant components, and reduction due to food processing (peeling). Measured and modelled residues correspond well (r² = 0.88-0.99), with all predictions falling within the 90% confidence interval of the measured values. A mean error of 43% over all studied pesticides was observed between model estimates and measurements. The fraction of pesticide applied during cultivation that is eventually ingested by humans is on average 10⁻⁴-10⁻⁶, depending on the time period between application and ingestion and the processing step considered. Model calculations and intake fractions via fruit consumption based on experimental data corresponded well for all pesticides with a deviation of less than a factor of 2. Pesticide residues in fruits measured at recommended harvest dates were all below European Maximum Residue Limits (MRLs) and therefore do not indicate any violation of international regulatory thresholds.     

利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

多点进水和多重回流成为提高活性污泥工艺去除污染物能力的常用方法,这导致活性污泥工艺流程较为复杂。对工艺进行模拟计算时,由于模拟池体数量比实际池体数量更多,流量平衡较为困难。根据工艺流程特征提出了主流线、副流线等概念,结合流量分配比、循环流量等参数,利用二维表进行流量平衡计算,简捷明了,便于检验,大大提高了进行流量平衡的准确性和效率。     

基于Monte-Carlo方法的静电除尘器除尘效率

针对经典除尘效率未考虑诸多随机因素影响的问题,提出了基于Monte-Carlo方法的效率分析模型,并通过实验数据验证其可靠性。通过该模型分析了粒径大小、电场气流速度、电晕电压、两极间距、粒子浓度等因素对收尘效率的影响规律,结果表明:基于Monte-Carlo方法的仿真结果精度更高,能有效预测静电除尘器的收尘效率,对于改进静电除尘器设计具有一定的理论意义和实用价值。     

香溪河流域土地利用格局演变对非点源污染的影响研究

以分布式模型SWAT为研究工具,在气候、土壤等因素不变的情况下,模拟了三峡库区香溪河流域土地利用格局演变对于非点源污染的影响.研究结果表明,自20世纪80年代至2007年,研究区由土地利用所造成的非点源污染TN总体呈减少趋势,4种土地利用情景下模拟得到的年均非点源污染TN分别为1 841.60、824.86、1 790...     

壁面粗糙度对旋风分离器内流场影响的数值模拟

利用计算流体动力学软件FLUENT6.2.16对壁面粗糙度不同的旋风分离器内流场进行了数值模拟,得到了切向速度、轴向速度、径向速度和静压力分布规律。旋风分离器内的切向速度随着壁面粗糙度的增大而明显减小;轴向速度没有明显的规律性变化,只在上部筒体涡核区轴向速度增加,削弱了涡核区滞留现象;在流场大部分区域径向速度随粗糙度的...