柴油发电机房噪声治理的优化设计及应用

目前柴油发电机房噪声的设计与治理方法没有形成固定的模式,为了解决这个问题,文章以某柴油发电机房噪声治理为例,对该噪声控制进行理论探讨、设计计算和技术优化。以此为据完成了工程,取得了良好的处理效果。并为柴油发电机房噪声控制提供了一种可供参考的方法。     

源液室火灾爆炸危险性分析及风险控制措施

对某企业源液室的危险有害因素进行了分析和辨识,利用火灾爆炸指数法进行了风险评价,针对源液室的现状提出了安全对策,同时建议其进行风险转移,以提高该企业抵抗风险的能力.     

热油泵房火灾事故分析及控制

运用事故树分析法,对炼化企业高温泵房火灾的原因进行分析,并提出预防措施.     

Bi5O7I/g-C3N4Z型异质结的常温沉淀制备及其光催化性能研究

以Bi（NO₃）₃·5H₂O、KI和g-C₃N₄为前驱体,采用常温沉淀法制备Bi₅O₇I/g-C₃N₄Z型异质结复合光催化剂,表征其光吸收性能、微观形貌、光生电子-空穴的分离效率等特性,研究新型光催化剂对RhB的可见光催化降解性能,探讨其可见光催化过程活性基团种类以及作用机理.结果表明：利用沉淀法合成Bi₅O₇I/g-C₃N₄的条件为：Bi（NO₃）₃·5H₂O、KI和g-C₃N₄的投加量分别为4.85g、1.66g和1.61g,乙二醇的用量为50mL,反应液的pH值为12,反应搅拌速度为200r/min,反应温度为25℃.Bi₅O₇I/g-C₃N₄异质结无杂相生成且纯度高,异质结复合发生在g-C₃N₄的（002）晶面和Bi₅O₇I的（203）晶面,但g-C₃N₄和Bi₅O₇I的化学结构未受影响.Bi₅O₇I/g-C₃N₄呈三维纳米花瓣形貌结构,为光生电子-空穴的迁移提供了大量的接触位点.Bi₅O₇I的g-C₃N₄掺杂改性使其光催化活性显著增强,其光吸收边缘由425nm红移至462nm,Bi₅O₇I/g-C₃N₄的能带排列结构与Z型异质结匹配,促进了光生电子-空穴的分离.其光电流密度（11.5mA/cm）约为g-C₃N₄和Bi₅O₇I对应值的2.66倍和1.47倍.Bi₅O₇I/g-C₃N₄对罗丹明B的可见光催化降解率为93.9%,显著高于g-C₃N₄（58%）和Bi₅O₇I（49.7%）的降解效果,其光催化氧化活性主要来自羟基基团、超氧基团和光生空穴等中间态自由基.     

Association of emergency room visits for respiratory diseases with sources of ambient PM2.5

Previous studies have reported associations of short-term exposure to different sources of ambient fine particulate matter(PM_(2.5)) and increased mortality or hospitalizations for respiratory diseases. Few studies, however, have focused on the short-term effects of source-specific PM_(2.5) on emergency room visits(ERVs) of respiratory diseases. Source apportionment for PM_(2.5) was performed with Positive Matrix Factorization(PMF) and generalized additive model was applied to estimate associations between source-specific PM_(2.5) and respiratory disease ERVs. The association of PM_(2.5) and total respiratory ERVs was found on lag4(RR = 1.011, 95%CI: 1.002, 1.020) per interquartile range(76 μg/m~3) increase.We found PM_(2.5) to be significantly associated with asthma, bronchitis and chronic obstructive pulmonary disease(COPD) ERVs, with the strongest effects on lag5(RR = 1.072,95%CI: 1.024, 1.119), lag4(RR = 1.104, 95%CI: 1.032, 1.176) and lag3(RR = 1.091, 95%CI: 1.047,1.135), respectively. The estimated effects of PM_(2.5) changed little after adjusting for different air pollutants. Six primary PM_(2.5) sources were identified using PMF analysis, including dust/soil(6.7%), industry emission(4.5%), secondary aerosols(30.3%), metal processing(3.2%),coal combustion(37.5%) and traffic-related source(17.8%). Some of the sources were identified to have effects on ERVs of total respiratory diseases(dust/soil, secondary aerosols, metal processing, coal combustion and traffic-related source), bronchitis ERVs(dust/soil) and COPD ERVs(traffic-related source, industry emission and secondary aerosols). Different sources of PM_(2.5) contribute to increased risk of respiratory ERVs to different extents, which may provide potential implications for the decision making of air quality related policies, rational emission control and public health welfare.     

Human factors applied to alarm panel modernization of nuclear control room

Human factors deal with issues related to humans, their behavior and the physical aspect of the environment in which they work. A control room is a complex system where operators perform plant operation using control systems and carry out monitoring and administrative responsibilities. For safe operation of industrial installation, the performance of the control room crew plays an important role. In this respect, a well designed control room is crucial for safe and efficient operation. The aim of this paper is to propose a methodological framework applied to nuclear control room evaluation, through participatory ergonomics, using operator activity analysis and human factors questionnaire as aid tools. We describe a case study in which the methodology framework was used in the evaluation process of a nuclear control room. The information gathered made possible a series of recommendation for the adequacy of the control room design, assisting in the safety assessment of the nuclear plant operation and justifying the alarm panel modernization.     

攀钢炼钢厂除尘技术改造思路及效果

就攀枝花新钢钒提钒炼钢厂转炉作业区转炉一次除尘系统、转炉二次除尘系统及脱硫扒渣烟气除尘系统在几年的运行中分别存在的问题进行了分析,主要包括由于炼钢工艺变化引起的除尘系统能力不足,原设计参数不太合理及原系统中设备配置不足等,对于以上问题提出了相应的改进思路并实施了相应的除尘改造,改造以后取得了较好预期效果。     

超细微粒灭火剂抑制单室火灾的试验研究

通过试验测量燃烧区温度的变化过程,研究了超细微粒灭火剂在单室火灾模型下与4种不同类型火焰的相互作用、灭火时间和效果。结果表明,超细微粒灭火剂具有较好的全淹没灭火能力。当1 000g超细微粒灭火剂施放后,位于微粒灭火剂流动路径上的无遮挡火焰(中央火和角落火)能够被迅速扑灭,灭火时间分别为3.9 s和7.2 s;对于火源功率较小的顶棚火,由于火羽流及热泳力的作用,微粒灭火剂能迅速扩散到顶棚,从而能在短时间内将其扑灭,灭火时间约6.3 s;对于遮挡火,其灭火时间较长,约14.3 s。微粒灭火剂浓度对灭火时间有较大影响。当微粒灭火剂的喷射质量为500 g时,虽然中央火、角落火和遮挡火均能被扑灭,但灭火时间都较喷射1 000 g灭火剂时有较长的延长,灭火时间分别为8.1 s,13.9 s和22.2 s。对于需要灭火剂微粒扩散较远距离后灭火的顶棚火,虽然灭火剂在热羽流和热泳力作用下能扩散到顶棚,但因浓度太低,同时由于其他3处火焰熄灭后,灭火室内的氧气消耗速率降低,从而使顶棚火得到足够的氧气,燃烧反应进一步加强,温度反而逐渐升高,不足以将其熄灭。     

燃油锅炉房的灭火系统

根据燃料特性及工艺特点,阐述了蒸汽灭火系统、水喷雾灭火系统、干粉灭火系统和泡沫灭火系统在燃油锅炉房中的应用条件、主要设计参数及与通风排烟系统的关系。     

燃煤锅炉房灰水系统阻垢对策探讨

对锅炉房灰水系统结垢问题进行分析,找出结垢的原因,采用以新型高效阻垢剂为主的综合方法进行防垢试验取得成功,并获得较好的经济效益。