AlN覆铜板盐雾环境下的退化行为研究

目的 研究AlN覆铜板在盐雾环境下的性能退化及其微观机制。方法 采用交替喷雾和干燥方法对AlN覆铜板进行15周期的中性盐雾试验,并在第1、3、6、10、15周期时检测其相关性能。主要通过击穿电压测试、介电性能测试和导热性能测试等方法,分别评价AlN覆铜板的电绝缘特性、介电损耗及导热系数,并通过扫描电镜和能谱测试对试样表面/截面微观形貌和元素变化进行分析。结果 AlN覆铜板导热系数和击穿电压随盐雾试验周期的增长而逐渐退化,最大退化率分别为13.2%和73.8%。介电损耗明显增加,盐雾试验15周期后,在低频区域的最大值约为1.3。Cu电极发生明显腐蚀,生成大量绿色腐蚀产物,导致表面Ni-P镀层脱落失效。H₂O分子扩散进入AlN陶瓷内部,在局部区域造成陶瓷水解,逐渐形成微裂纹。结论 盐雾试验过程中,Ni-P镀层逐渐开裂剥落,Cu电极表面最终形成大面积疏松多孔的腐蚀产物层。H₂O、Cl^–、Na⁺等逐渐溶解扩散进入AlN陶瓷,导致陶瓷中空位、裂纹、杂质缺陷浓度增加,二者都会增强导热过程中的声子-缺陷散...     

3种染料化合物在UV-TiO2/H2O2和UV-TiO2体系中的光催化降解研究

采用自制的TiO2膜和平板式固定床型光催化氧化反应装置,对甲基橙、茜素红和罗丹明B 3种含有不同生色基团的染料化合物进行了TiO2光催化氧化降解研究,通过对照测定降解过程中吸光度、电导率、pH的变化,分析了在加入和不加入H2O22种情况下降解过程的异同,比较了3种染料化合物脱色的难易程度,揭示了降解产物中无机离子的变化规律及某些可能的产物类型.     

大同矿区煤的导热系数灰色关联分析及预测

为分析煤质指标及密度对导热系数的影响作用,选取了山西大同矿区的不同煤质煤样,进行导热系数测定实验,应用灰色系统理论对导热系数与影响因素进行灰色关联分析,建立导热系数与主要影响因素的GM(1,4)灰色预测模型,进行导热系数预测。结果表明:固定碳、密度和水分是影响煤导热系数的主要因素;根据得出的主要影响因素建立的GM(1,4)预测模型平均相对误差为4.5%,预测精度较高,能够用于导热系数的预测。     

Spatial variability in soil water and salinity in Tamarix community in a semiarid saline region of the upper Yellow River北大核心CSCD

Tamarix is widely distributed in semiarid saline regions of the upper Yellow River. The community of Tamarix affects the spatial distribution of soil water and salinity. It is important to explore the dynamic response relationship of Tamarix community and spatial distribution of soil water and salinity in order to evaluate the effects of vegetation community construction and ecological restoration in this region. The natural Tamarix community in the secondary saline-alkali land of the Ningxia Yellow River Irrigation Area was investigated in July 2016. Classical statistics and geostatistics were used to analyze the spatial distribution characteristics of soil water and salinity. The results showed that the soil water content was relatively low (1.98%-7.55%), whereas the soil salinity was high (average conductivity 10.28-25.38 mS/cm) in the study area. The variability coefficient range of soil water and salinity was 36.1%-83.7%, both with moderate variations. Furthermore, the variation degree of soil salinity decreased with the increase in soil depth. The soil water and salinity had obvious spatial structure characteristics, which was mainly affected by structural factors or structural factors associated with stochastic factors. The coefficients of nugget were 0.04%-49.88%, indicating the strong spatial correlation. The spatial distribution of soil water and salinity in Tamarix community showed a patchy pattern; the soil water and salinity distribution in the areas with high Tamarix growing density were considerably high. The correlation analysis showed that there was a positive correlation between soil water and salinity in the study area. In conclusion, soil water and salinity restrict the distribution and growth of Tamarix. Furthermore, the distribution and growth of Tamarix enhanced the spatial variability of soil water and salinity. Keywords. © 2018 Science Press. All rights reserved.     

基于Box Behnken设计的煤导热系数分析与预测

为研究分析水分、固定碳及密度3个因素对煤导热系数的影响,选取多个矿井不同煤质的煤作为实验煤样,使用NETZSCH LFA457型激光导热系数测试仪进行测定,并引入二次响应曲面试验设计思想,采用Design Expert软件进行煤质指标的Box Behnken试验设计,按设计表筛选实验数据,构建了导热系数多因素、多水平影响下二次回归响应曲面模型,并对不同采样地点的煤导热系数进行了分析与预测。结果表明:二次回归方程P值小于0.000 1,极显著,失拟项为0.072 4,不显著,回归方程具有统计学意义;当水分在0.9%~10.9%,固定碳在49.3%~83.6%,密度在1.2~1.92 g·cm³之间,对煤的导热系数一次项影响程度为密度>固定碳>水分;二次项影响程度为固定碳和密度>水分和密度>水分和固定碳,且固定碳和密度之间存在交互作用,水分和密度、水分和固定碳之间无交互作用;应用响应曲面模型预测的煤导热系数误差为4.3%,满足精度要求。     

发泡注浆法合成莫来石轻质耐火材料

以工业废弃物粉煤灰和当地粘土为主要原料,十二烷基苯磺酸钠为发泡剂,采用发泡注浆法制备轻质莫来石耐火材料,研究了烧结温度对耐火材料晶相的影响以及发泡剂的种类、添加量和浆料固含量对轻质耐火材料常温物理性能的影响。结果表明,适当的烧结温度可改善耐火材料的晶相,同时对制品的孔隙率也有一定影响。选择适宜的发泡剂及添加量,在一定的浆料固含量范围内,可以制备容重小,孔隙率高,导热系数小,机械强度适中的轻质耐火材料。     

Viscosities, thermal conductivities and diffusion coefficients of CO2 mixtures: Review of experimental data and theoretical models

Accurate experimental data on the thermo-physical properties of CO₂-mixtures are pre-requisites for development of more accurate models and hence, more precise design of CO₂ capture and storage (CCS) processes. A literature survey was conducted on both the available experimental data and the theoretical models associated with the transport properties of CO₂-mixtures within the operation windows of CCS. Gaps were identified between the available knowledge and requirements of the system design and operation. For the experimental gas-phase measurements, there are no available data about any transport properties of CO₂/H₂S, CO₂/COS and CO₂/NH₃; and except for CO₂/H₂O(/NaCl) and CO₂/amine/H₂O mixtures, there are no available measurements regarding the transport properties of any liquid-phase mixtures. In the prediction of gas-phase viscosities using Chapman–Enskog theory, deviations are typically <2% at atmospheric pressure and moderate temperatures. The deviations increase with increasing temperatures and pressures. Using both the Rigorous Kinetic Theory (RKT) and empirical models in the prediction of gas-phase thermal conductivities, typical deviations are 2.2–9%. Comparison of popular empirical models for estimation of gas-phase diffusion coefficients with newer experimental data for CO₂/H₂O shows deviations of up to 20%. For many mixtures relevant for CCS, the diffusion coefficient models based on the RKT show predictions within the experimental uncertainty. Typical reported deviations of the CO₂/H₂O system using empirical models are below 3% for the viscosity and the thermal conductivity and between 5 and 20% for the diffusion coefficients. The research community knows little about the effect of other impurities in liquid CO₂ than water, and this is an important area to focus in future work.     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

三峡库区澎溪河与磨刀溪电导率等水质特征与水华的关系比较

三峡库区北岸最大一级支流自三峡大坝2003年蓄水以来,频繁暴发水华,而毗邻的一级支流磨刀溪却少有水华暴发.本文以澎溪河和磨刀溪作为研究对象,于2014年春季和夏季三峡库区水华高发期对两条河流同时采样,对比分析两条河流水体水质以及叶绿素a(Chl-a)含量的时空变化,探索澎溪河水华暴发机理.结果表明:澎溪河Chl-a含量较磨刀溪高,澎溪河春季Chl-a最大值为60.5μg·L~(-1),夏季Chl-a最大值仅7.8μg·L~(-1);磨刀溪Chl-a变化趋势与澎溪河相反,磨刀溪春季Chl-a含量为2.92μg·L~(-1),夏季Chl-a达到7.48μg·L~(-1).澎溪河与磨刀溪春季和夏季节水体温度分层,为温跃层+滞温层模式,而没有混合层;两条河流Chl-a含量均位于水深10 m温跃层.澎溪河春季总氮(TN)、总磷(TP)平均值为2.305 mg·L~(-1)和0.053 mg·L~(-1),夏季为1.673 mg·L~(-1)和0.097 mg·L~(-1);磨刀溪春季为1.875 mg·L~(-1)和0.075 mg·L~(-1),夏季为1.79 mg·L~(-1)和0.054 mg·L~(-1).TN、TP水平均超过了国际公认发生富营养化的阈值;水体氮磷含量与Chl-a浓度并无显著相关性,营养盐并不是藻类生物量的限制性因素.然而在水体电导率的规律方面,两条河却存在很大的差异;春季,磨刀溪上游上层水体(0~10 m)电导率只有下游和长江干流的75%,来自长江干流的回水可覆盖至磨刀溪中游(断面MD03),与Chl-a在此处密集保持一致;夏季电导率和回水区分布与春季相似.与磨刀溪不同,澎溪河春季上游电导率为下游和干流的150%,长江干流回水可到PX04与PX05之间,上游高电导率对应着高Chl-a含量;澎溪河电导率与藻类生长分布表现出显著正相关关系,水体中除N、P营养盐外的其它离子对澎溪河水华暴发起重要作用.     

聚合反应时间对聚酰亚胺基碳膜结构和性能的影响研究

目的 系统研究前驱体聚合反应时间对PI膜及其碳化、石墨化后薄膜结构和性能的影响规律。方法 通过调整聚合合成聚酰胺酸（PAA）溶液过程中的反应时间,制备石墨膜前驱体聚酰亚胺（PI）原膜,将不同工艺条件下制得的PI膜进行碳化、石墨化处理,得到高导热率石墨膜。利用扫描电镜、红外光谱、拉曼光谱仪和LFA激光闪射仪对制备的PI膜、碳化膜及石墨膜的微观结构和热导率进行检测。结果 随聚合反应时间的延长,PI膜酰亚胺化程度和石墨膜的石墨化程度及导热性能先增高、后降低。反应时间为3 h时,制得的石墨膜结构致密,石墨片层取向性好,导热性能最好,热导率可达765.2W/(m·K)。结论 PI膜前驱体聚合反应时间显著影响PI膜酰亚胺化的程度和有序度,进而影响石墨膜的定向性和导热性能。