基于热线法的不同水分含量松散煤体热物性实验与模拟研究

为解决松散煤体热物性参数的测试周期长与实验误差大等问题,构建测试装置实验平台,结合交叉热线法和平行热线法,对松散煤体热物性参数进行准确测量与计算,对1～2 mm,0.5～0.6 mm和0.2～0.3 mm 3种不同粒径煤样在不同水分含量下的热物性参数的变化规律进行研究,利用Fluent数值模拟软件对松散煤体温度场进行模...     

卫生填埋场黏土衬层密实性试验研究

开展卫生填埋场中的黏土衬层密实性试验研究对填埋场的工程设计和后期运营具有现实意义.黏土压实的直接影响之一就是孔隙率的减小,并改变黏土的电阻率,为高密度电阻率法在衬层密实性中的调查研究提供了前提条件和物理基础.文章采用高密度电阻率法三种装置(测深、温纳、偶极-偶极)进行对比测量,通过电阻率成像技术对压实黏土的电性特征进行...     

采空区冒落带内破碎岩体的渗流特征与渗透性试验研究

为探索采空区冒落带内破碎岩体中地下水的渗流特征,建立采空区冒落带内破碎岩体渗透系数与空隙率的相关关系,确定采空区冒落带内破碎岩体的渗透系数值,并基于采空区冒落带内破碎岩体的空隙分布特征与大孔隙非均质多孔介质的水流特征,设计了一套一维渗流柱,采用常水头稳态渗透法对采空区冒落带内破碎岩体的渗透性能以及不同空隙率破碎岩体的渗...     

缓冲液对微生物燃料电池产电性能影响研究

微生物燃料电池(microbial fuel cell,MFC)应用于废水处理是一项非常有潜力的除污产能的绿色技术.但MFC运行过程中采用磷酸盐缓冲液不符合除污产能要求,增加水体富营养化趋势且增加水处理成本.试验采用单极室微生物燃料电池处理模拟生活污水,以投加PBS(phosphate buffer solution)...     

森林植被影响径流形成机制研究进展

径流形成机制研究在水文学领域中具有十分重要的意义,且受到越来越广泛的重视。水文环境以及水文通量的空间异质性和时间变化性导致了水文过程的尺度依赖性和非线性特征,没有对水文过程较为清晰的认识,就不能将某一地区某一流域森林植被变化水文生态效应的研究结果简单地外推到其他地区和其他流域。开发基于物理过程分布式参数水文模型可以为认识森林植被变化的生态学后效和客观评价森林植被水文生态效益提供可行的工具。但是要实现这一目标,研究森林植被影响径流形成机制是问题的核心所在。另一方面,认识森林影响径流形成机制有助于研究水文学中的尺度问题。研究森林植被影响径流形成机制的主要方法包括水文测验、同位素示踪和动力水文学计算等,研究的空间尺度则为坡面与流域相接合。从已有的研究成果来看,森林植被影响径流形成机制可以概括为:①森林流域径流形成为变动源区产流机制;②森林流域径流形成主要受饱和地表径流、亚表层径流和地下径流的控制;③森林流域径流形成机制是相互作用和相互转化的;④优先流在森林流域径流形成中起到了至关重要的作用。     

复合填料热传导过程数值模拟

复合填料由废铸砂、粉煤灰、聚苯乙烯(EPS)颗粒、水泥和水按一定质量比例混合制成,具有低导热性、抗冻胀和轻质特性。根据热阻力法则和比等效导热系数相等法则,将材料视为由大量正方形单元体组成,其中心为一个球形EPS颗粒,这种单元体与总体的导热系数相等。运用AN SY S软件对复合填料单元体的传热过程进行了有限元模拟,根据瞬态法导热系数测试原理,推求不同EPS掺入比情况下的复合填料导热系数,分析EPS颗粒与导热系数的关系,发现材料导热系数随着EPS掺入比的增加而快速降低。将材料导热系数数值模拟与实测结果作比较,发现有限元模拟值与实测值接近,说明采用有限元方法可以实现对材料传热过程的模拟。     

电导和直流安培双检测器离子色谱法测定清洁水样中的碘化物

选用配备了2种不同检测器(电导检测器和直流安培检测器)的离子色谱仪对稀释后过0.22μm滤膜的水样进行分析。配备有直流安培检测器的离子色谱仪测定水中碘化物的方法在0.100~20.0μg/L范围内线性关系良好,相关系数(r)=0.9999,方法检出限为0.030μg/L,测定下限为0.120μg/L,样品加标回收率为95.0%~104%,相对标准偏差为1.06%~1.64%;配备有电导检测器的离子色谱仪测定水中碘化物的方法在20.0~2.00×105μg/L范围内线性关系良好,相关系数(r)=0.9995,方法检出限为2.00μg/L,测定下限为8.00μg/L,样品加标回收率为99.0%~110%,相对标准偏差为0.71%~3.12%。离子色谱-直流安培检测器法测定水中碘化物的方法准确度高、灵敏度高、精密度好,检出限相对较低,适用于测定ρ(碘化物)≤20.0μg/L的清洁水样;离子色谱-电导检测器法主要适用于测定ρ(碘化物)≥20.0μg/L的水样。     

Influence of thermal environment on metallographic structure characteristics of the electric arc bead pattern

Electrical apparatuses are prone to arc, which generally causes a fire, even an explosion hazard, when a flammable gas mixture is present, especially during industrial processes. Terrible fire scenes are challenging for fire investigations. In this work, by performing a simultaneous thermal analysis test we simulated a fire environment and found that as the oxygen concentration decreased, the oxidation/exothermic peak temperature of ‘cause’ bead became higher, but the melting temperature was unaffected. Results indicated that the bead pattern underwent oxidation at approximately 831 °C, melting initiated at approximately 1060 °C, and the pattern then disappeared. The melted pattern grain changes were divided into three critical temperature stages: Approximately 600 °C, the onset temperature at which the melted pattern grains began to be equiaxed; approximately 831 °C, at which the grains were interspersed with oxygen-containing material; and 831–1060 °C, when the grains disappeared, which is a criterion for identifying electrical fires. However, the boundaries remained throughout the thermal environment process. Moreover, the bead pattern demonstrated three metallographic regions: Deep layer (Region I), the intermediate layer (Region Ⅱ), and surface layer (Region Ⅲ). Region I was the most thermally sensitive, in which equiaxed crystals first appeared. Region Ⅲ was the thermal reaction lag zone, in which the typical branching crystals finally disappeared, and Region Ⅱ was intermediate between Regions I and Ⅲ. The results may help fire investigators determine the fire scene temperature stages and provide support for fire evidence extraction.     

IMPACT OF SURFACE COAL MINING ON THREE OHIO WATERSHEDS –PHYSICAL CONDITIONS AND GROUND-WATER HYDROLOGY1

ABSTRACT: A study was conducted over a six-year period in East-Central Ohio to determine the effects of surface mining and reclamation on physical watershed conditions and on ground-water hydrology in three ground-water zones in three small experimental watersheds. Mining disturbances in watersheds adjacent to the experimental sites affected ground-water levels in the undisturbed experimental watersheds prior to actual mining in the experimental sites. New subsurface flow paths, with different characteristics, formed during mining and reclamation. At all three sites mining dewatered the saturated zone above the underclay of the mined coal seam. Mining and reclamation affected ground-water levels below the mined coal seam in the middle and lower zones within at least two sites. Ground-water level recovery in the mined upper saturated zone was slow and irregular both temporally and spatially after reclamation. Hydraulic conductivities of postmining (Phase 3) spoil were generally greater than those of Phase 1 bedrock, but wide spatial variability was observed. Modelers need to be aware of the complexities of new flow paths and physical characteristics of subsurface flow media that are introduced by mining and reclamation, including destruction of the upper-zone clay.     

漏电开关质量可靠性评价指标及模型的探讨——兼论民用建筑安全供用电网络的可靠构筑

结合对电气可靠性技术的宏观分析态势及安全减灾[9][10]的迫切要求,研究了实用的漏电开关质量可靠性评价指标及分析模型;针对漏电开关的故障,提出了构筑现代民用建筑(多指住宅)供用电安全网络的实施要点及有关标准化措施。