北京首都机场绿色滑行时间估算

采用北京首都机场2014年实际CDM地面放行数据确定航空器的污染物排放量与离场排队飞机数量和落地滑入飞机数量的强关联性,构建包含这两个解释变量为影响因素的多元线性回归模型,用以估算几种常见机型在首都机场地面运行时的最小污染物排放量和绿色滑行时间。对比实际污染物排放量与最小污染物排放量,得出首都机场离场地面污染物排放量远远超过最小污染物排放量。     

城市能源利用与环境保护的综合管理初探

能源短缺和环境污染已成为中国推行全面协调可持续发展的重要制约因素,作为能源消耗的主体和环境污染的控制重点,在城市层面推动能源发展战略的转变和强化环境保护是发展的基本要求.鉴于能源与环境之间的高度关联性,在管理方面要求对能源发展和环境保护进行统筹考虑和综合管理,充分强调能源经济效率和环境制约因素在能源发展中的作用.通过制定合理的产业能效标准和排放绩效标准,为城市经济、能源和环境的可持续性发展提供科学性、系统性决策支持.     

环境-经济系统整合模型的构建研究

环境经济系统整合模型的研究将环境的、经济的、社会的因素整合在可持续发展框架中．模拟、分析经济系统与环境系统之闻的相互作用和反馈关系。本文在分析环境经济系统整合模型构建的背景、理论与方法的基础上．设计了环境经济系统整合模型开发的技术路线．提出了环境经济系统整合模型的主要内容。     

Robustness of Meteorological Droughts in Dynamically Downscaled Climate Simulations

We examine the robustness of a suite of regional climate models (RCMs) in simulating meteorological droughts and associated metrics in present‐day climate (1971‐2003) over the conterminous United States (U.S.). The RCMs that are part of North American Regional Climate Change Assessment Program (NARCCAP) simulations are compared with multiple observations over the climatologically homogeneous regions of the U.S. The seasonal precipitation, climatology, drought attributes, and trends have been assessed. The reanalysis‐based multi‐model median RCM reasonably simulates observed statistical attributes of drought and the regional detail due to topographic forcing. However, models fail to simulate significant drying trend over the Southwest and West. Further, reanalysis‐based NARCCAP runs underestimate the observed drought frequency overall, with the exception of the Southwest; whereas they underestimate persistence in the drought‐affected areas over the Southwest and West‐North Central regions. However, global climate model‐driven NARCCAP ensembles tend to overestimate regional drought frequencies. Models exhibit considerable uncertainties while reproducing meteorological drought statistics, as evidenced by a general lack of agreement in the Hurst exponent, which in turn controls drought persistence. Water resources managers need to be aware of the limitations of current climate models, while regional climate modelers may want to fine‐tune their parameters to address impact‐relevant metrics.     

Impacts of Changes in Precipitation Amount and Distribution on Water Resources Studied Using a Model Rainwater Harvesting System

Water supply reliability is expected to be affected by both precipitation amount and distribution changes under recent and future climate change. We compare historical (1951‐2010) changes in annual‐mean and annual‐maximum daily precipitation in the global set of station observations from Global Historical Climatology Network and climate models from the Inter‐Sectoral Impact Model Intercomparison Project (ISI‐MIP), and develop the study to 2011‐2099 for model projections under high radiative forcing scenario (RCP8.5). We develop a simple rainwater harvesting system (RWHS) model and drive it with observational and modeled precipitation. We study the changes in mean and maximum precipitation along with changes in the reliability of the model RWHS as tools to assess the impact of changes in precipitation amount and distribution on reliability of precipitation‐fed water supplies. Results show faster increase in observed maximum precipitation (10.14% per K global warming) than mean precipitation (7.64% per K), and increased reliability of the model RWHS driven by observed precipitation by an average of 0.2% per decade. The ISI‐MIP models show even faster increase in maximum precipitation compared to mean precipitation. However, they imply decreases in mean reliability, for an average 0.15% per decade. Compared to observations, climate models underestimate the increasing trends in mean and maximum precipitation and show the opposite direction of change in reliability of a model water supply system.     

Barriers to Renewable Energy Development on Brownfields

Brownfields that are reused for the generation of renewable energy are called brightfields. This rapidly emerging idea advocates the combination sustainable site reuse and the generation of electricity from renewables. While programmes like the RE-Powering America's Land Initiative herald its benefits, academia knows but little of its barriers and challenges. This study aims to examine the technical/environmental, regulator/financial/institutional, and social barriers to this type of development, along with measures that may address them. The barriers and measures were predominately identified via a qualitative and quantitative survey sent to brightfield developers (experts), along with a review of case studies and the emerging brightfield literature. The study found that environmental/technical barriers only differ from ‘conventional’ renewable energy projects (e.g. on Greenfields) in the event of site contamination. The latter then is what makes brightfields unique and is the source for a myriad of challenges concerning risk and liability, which cause financial problems and investment hesitance. However, evidence conjectures that there is less contextual public opposition to brightfields compared to conventional renewable energy.     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

Environmentally compatible energy resource production—consumption pattern (case study: Iran)

Like all rapidly developing countries, the government of Iran (GOI) has to integrate environment priorities into its energy sector. In order to integrate environmental concerns into energy sector, an Energy-Environment Review (EER) may be considered as the mainstreaming tool capable of examining the interface between energy and the environment. The results of the EER should be interpreted, in the light of the objective of the 4th Five Year Development Plan in Iran, to achieve fast and sustainable growth and accelerate the transition to a market economy. In particular, the suggested actions will promote economic efficiency use of energy resources through a proper allocation of scarce resources, including environmental resources, so as to achieve economic efficiency and environmental and social protection. This paper comprises: (A) an analysis of the current situation with regards to energy production and consumption; (B) an evaluation of the growth prospects with regard to energy production and consumption; (C) the identification of environmental issues induced by the generation and use of energy and estimation of the associated costs of damages; (D) the evaluation of the extent of contribution to the climate-change phenomenon through emission of greenhouse gases; (E) the evaluation of the proposed mitigation measures for the previously identified environmental problems; and (F) conclusions and recommendations. The EER-Iran assessed the total health damage from air pollution in 2001 at about 56  ×  10¹² Rials (US $ seven billion); equivalent to 8.4% of nominal GDP. In the absence of the price reform and control policies, the EER-Iran estimated that the damage in Iran in the money of 2001, will grow to 155  ×  10¹² Rials (US $ nine billion) by 2019. This is equivalent to 10.9% of nominal GDP, i.e., a large percentage of a larger GDP. Of this total, 107  ×  10¹² Rials (US $ 8.4 billion) come from transport sector. The damage cost to the global environment from the flaring of natural gas, assessed on the basis of a carbon price of US $ 10/ton CO₂, is found to be approximately US $ 600 million per year. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Evaluating the role of environmental quality in the sustainable rural economic development of England

The issue of the sustainable development of rural economies in England has recently received considerable attention. This is because many of the poorest areas in the country are rural, often of high environmental quality, but suffering from high unemployment and a lack of services and facilities. The rapid decline in agricultural incomes and in-migration of affluent urban workers since 1990 has exacerbated economic inequality in such areas. A number of factors have the potential to drive rural development and this paper applies, and considers, the feasibility of a method from the USA for combining economic and environmental variables in a regional growth model to examine the hypothesis that environmental quality is an important determinant of sustainable rural development in England. The model output suggests that, although environmental quality does play a role in sustainable rural development in England there are other, more important, factors driving development. These include business and communications infra-structure, the degree and opportunities for commuting and underlying employment prospects. The robustness and limitations of the method for combining economic and environmental variables is discussed in relation to the spatial interrelatedness of Local Authority Districts in England, and conclusions are drawn about areas for refinement and improvement of the method.

Comparison of Function of Created Wetlands of Two Age Classes in Central Pennsylvania

Hydrogeomorphic (HGM) functional assessment models were used to assess whether function in created wetlands of two ages (1 year old and >12 years old) was equivalent to that of natural (reference) mainstem floodplain wetlands. Reference wetlands scored higher than both created age classes for providing energy dissipation and short-term surface water storage. Reference wetlands scored higher in maintaining native plant community and structure than 1-year-old sites, and 12-year-old wetlands scored higher than reference sites for providing vertebrate habitat structure. Analysis of individual model variables showed that reference wetlands had greater vegetative biomass and higher soil organic matter content than both created wetland age classes. Created wetlands were farther from natural wetlands and had smaller mean forest patch sizes within a 1-km-radius circle around the site than did the reference sites, indicating less hydrologic connectivity. Created wetlands also had less microtopographic variation than reference wetlands. The 1-year-old created sites were placed in landscape settings with greater land use diversity and road density than reference sites. The 12-year-old sites had a higher gradient and a higher percentage of their surrounding area in urban land use. These results show that the created wetlands were significantly structurally different (if not functionally so) from reference wetlands even after 12 years. The most profound differences were in hydrology and the characteristics of the surrounding landscape. More attention needs to be focused on placing created wetlands in appropriate settings to encourage proper hydrodynamics, eliminate habitat fragmentation, and minimize the effects of stressors to the site.