A synthesis of environmental and recreational mitigation requirements at hydropower projects in the United States

Environmental mitigation plays an important role in the environmentally sustainable development of hydropower resources. However, comprehensive data on mitigation required by the Federal Energy Regulatory Commission (FERC) at United States (US) hydropower projects is lacking. Therefore, our objective was to create a comprehensive database of mitigation required at non-federal hydropower projects and provide a synthesis of available mitigation data. Mitigation data was collated for over 300 plants licensed or relicensed from 1998 through 2013. We observed that the majority of FERC mitigation requirements deal with either hydrologic flows or recreation and that hydropower plants in the Pacific Northwest had the highest number of requirements. Our data indicate opportunities exist to further explore hydropower mitigation in the areas of environmental flows, fish passage, and water quality. Connecting these data with ecological outcomes, actual flow data, and larger landscape level information will be necessary to evaluate the effectiveness of mitigation and ultimately inform regulators, managers, and planners.     

发挥环保监督网络作用 搞好“一控双达标”

介绍了新余发电有限责任公司建立环保监督网络和开展环保技术监督，做好“一控双达标”工作的具体做法。     

滨海城市环境工程地质问题成灾特点分析

滨海城市是我国经济最发达的地区，近年来经济与城市建设均得到迅速发展，城市土地开发力度加大，由此起起的环境工程地质问题也日趋严重。本文分析了我国滨海城市环境工程地质问题的主要类型，研究了环境工程地质问题的成灾特点。     

北美自由贸易区和欧盟的环境政策：趋向,启示与对策

以北美自由贸易区和欧盟为代表的区域性经济集团已在经济利益与环境保护挂钩的制度性安排方面取得诸多进展，它们不同程度地在机构设置、协定条款、资金安排等方面强化了环境要求，并在国际环境公约的执行上表现出积极、灵活的特点。这一切都将为未来多边经济体系中环境问题的协商和解决开辟了新的途径， 也为我国在实施可持续发展过程中的环境制度化建设提供可鉴之处。     

Solution-oriented global environmental assessments: Opportunities and challenges

This article provides an introduction to the Special Issue dedicated to “Solution-oriented Global Environmental Assessments: Opportunities and Challenges”. In the follow-up to the Paris climate agreement and the adoption and early implementation of the global Sustainable Development Goals involving many synergies and trade-offs, the need to shift the focus from environmental problem analysis towards the exploration of specific solution options can be observed in international environmental governance debates. To remain policy-relevant, credible and legitimate, global environmental assessments (GEAs) must carefully adapt to a rapidly evolving governance landscape. This Special Issue sheds light on the potential utility and implications of increased solution-orientation of GEAs. It builds on the research project “The Future of Global Environmental Assessment Making” that was jointly initiated in 2013 by UN Environment and the Mercator Research Institute on Global Commons and Climate Change. The article collection includes research on the coevolution of GEAs and the increasingly solution-oriented governance context; conditions of success for contemporary GEAs; the treatment of divergent viewpoints, stakes and stakeholders in solution-oriented GEAs; knowledge aggregation; and the enhanced measurement of GEA effectiveness in the emerging governance landscape.     

室内空气环境质量的探讨

介绍了室内空气环境质量的国内外有关研究成果。内容包括IAQ问题引发关注的缘由,IAQ的影响因素、评价方法及改善IAQ的相关措施。     

Perceived prosocial impact,perceived situational constraints,and proactive work behavior: Looking at two distinct affective pathways

This paper examines the role of affect as a linking mechanism between experiences at work (perceived prosocial impact and situational constraints) and two distinct components of proactive work behavior (issue identification and implementation). Based on a dual‐tuning perspective, we argue that both positive affect and negative affect can be beneficial for proactive work behavior. Multi‐level path analysis using daily‐survey data from 153 employees showed that perceived prosocial impact predicted positive affect and that situational constraints as a typical hindrance stressor predicted negative affect. Negative affect, in turn, predicted issue identification, and positive affect predicted implementation. Overall, our study suggests that both positive and negative affects can be valuable in the organizational context by contributing to distinct components of proactive behavior. Copyright © 2015 John Wiley & Sons, Ltd.     

飞机撞击下核电厂安全壳载荷曲线相关问题研究

针对大型商用飞机对核电厂反应堆安全壳恶意撞击的安全评估需求,综述了国外确定飞机撞击安全壳载荷曲线的基础理论、试验测试技术和数值模拟方法.首先,从理论上对飞机撞击安全壳的载荷特性和Riera撞击模型进行分析,给出了Riera模型的基本假设、模型各项物理意义及模型的求解方法,明确了靶体碰撞表面的冲击载荷(力)由静载项和动载项组成;其次,分析总结了确定Riera模型中压损载荷参数的试验方法和真实飞机撞击载荷测量的试验技术和实施方法,指出大型商用飞机对核电厂反应堆安全壳恶意撞击属"软冲击"范畴,撞击载荷可用Riera模型计算得到;再者,在数值模拟方面,总结了采用有限元技术进行飞机撞击载荷计算和安全评估的数值模拟方法及其发展趋势;最后,在分析国内开展飞机撞击载荷研究面临问题的基础上,指出从理论上建立飞机撞击载荷-时间曲线计算模型及方法,并通过试验和数值模拟验证是国内确定大型商用飞机撞击安全壳结构载荷曲线比较可行的技术路线.     

Injuries in Full-Scale Vehicle Side Impact Moving Deformable Barrier and Pole Tests Using Postmortem Human Subjects

Objective: To conduct near-side moving deformable barrier (MDB) and pole tests with postmortem human subjects (PMHS) in full-scale modern vehicles, document and score injuries, and examine the potential for angled chest loading in these tests to serve as a data set for dummy biofidelity evaluations and computational modeling.

Methods: Two PMHS (outboard left front and rear seat occupants) for MDB and one PMHS (outboard left front seat occupant) for pole tests were used. Both tests used sedan-type vehicles from same manufacturer with side airbags. Pretest x-ray and computed tomography (CT) images were obtained. Three-point belt-restrained surrogates were positioned in respective outboard seats. Accelerometers were secured to T1, T6, and T12 spines; sternum and pelvis; seat tracks; floor; center of gravity; and MDB. Load cells were used on the pole. Biomechanical data were gathered at 20 kHz. Outboard and inboard high-speed cameras were used for kinematics. X-rays and CT images were taken and autopsy was done following the test. The Abbreviated Injury Scale (AIS) 2005 scoring scheme was used to score injuries.

Results: MDB test: male (front seat) and female (rear seat) PMHS occupant demographics: 52 and 57 years, 177 and 166 cm stature, 78 and 65 kg total body mass. Demographics of the PMHS occupant in the pole test: male, 26 years, 179 cm stature, and 84 kg total body mass. Front seat PMHS in MDB test: 6 near-side rib fractures (AIS = 3): 160–265 mm vertically from suprasternal notch and 40–80 mm circumferentially from center of sternum. Left rear seat PMHS responded with multiple bilateral rib fractures: 9 on the near side and 5 on the contralateral side (AIS = 3). One rib fractured twice. On the near and contralateral sides, fractures were 30–210 and 20–105 mm vertically from the suprasternal notch and 90–200 and 55–135 mm circumferentially from the center of sternum. A fracture of the left intertrochanteric crest occurred (AIS = 3). Pole test PMHS had one near-side third rib fracture. Thoracic accelerations of the 2 occupants were different in the MDB test. Though both occupants sustained positive and negative x-accelerations to the sternum, peak magnitudes and relative changes were greater for the rear than the front seat occupant. Magnitudes of the thoracic and sternum accelerations were lower in the pole test.

Conclusions: This is the first study to use PMHS occupants in MDB and pole tests in the same recent model year vehicles with side airbag and head curtain restraints. Injuries to the unilateral thorax for the front seat PMHS in contrast to the bilateral thorax and hip for the rear seat occupant in the MDB test indicate the effects of impact on the seating location and restraint system. Posterolateral locations of fractures to the front seat PMHS are attributed to constrained kinematics of occupant interaction with torso side airbag restraint system. Angled loading to the rear seat occupant from coupled sagittal and coronal accelerations of the sternum representing anterior thorax loading contributed to bilateral fractures. Inward bending initiated by the distal femur complex resulting in adduction of ipsilateral lower extremity resulted in intertrochanteric fracture to the rear seat occupant. These results serve as a data set for evaluating the biofidelity of the WorldSID and federalized side impact dummies and assist in validating human body computational models, which are increasingly used in crashworthiness studies.     

The Contribution of Pre-impact Posture on Restrained Occupant Finite Element Model Response in Frontal Impact

Objective: The objective of this study was to discuss the influence of the pre-impact posture to the response of a finite element human body model (HBM) in frontal impacts.

Methods: This study uses previously published cadaveric tests (PMHS), which measured six realistic pre-impact postures. Seven postured models were created from the THUMS occupant model (v4.0): one matching the standard UMTRI driving posture as it was the target posture in the experiments, and six matching the measured pre-impact postures. The same measurements as those obtained during the cadaveric tests were calculated from the simulations, and biofidelity metrics based on signals correlation (CORA) were established to compare the response of the seven models to the experiments.

Results: The HBM responses showed good agreement with the PMHS responses for the reaction forces (CORA = 0.80 ± 0.05) and the kinematics of the lower part of the torso but only fair correlation was found with the head, the upper spine, rib strains (CORA= 0.50 ± 0.05) and chest deflections (CORA = 0.67 ± 0.08). All models sustained rib fractures, sternal fracture and clavicle fracture. The average number of rib fractures for all the models was 5.3 ± 1.0, lower than in the experiments (10.8 ± 9.0).

Variation in pre-impact posture greatly altered the time histories of the reaction forces, deflections and the rib strains, mainly in terms of time delay, but no definite improvement in HBM response or injury prediction was observed. By modifying only the posture of the HBM, the variability in the impact response was found to be equivalent to that observed in the experiments. The postured HBM sustained from 4 to 8 rib fractures, confirming that the pre-impact posture influenced the injury outcome predicted by the simulation.

Conclusions: This study tries to answer an important question: what is the effect of occupant posture on kinematics and kinetics. Significant differences in kinematics observed between HBM and PMHS suggesting more coupling between the pelvis and the spine for the models which makes the model response very sensitive to any variation in the spine posture. Consequently, the findings observed for the HBM cannot be extended to PMHS. Besides, pre-impact posture should be carefully quantified during experiments and the evaluation of HBM should take into account the variation in the predicted impact response due to the variation in the model posture.