Human exposure to polybrominated diphenyl ethers (PBDE), as evidenced by data from a duplicate diet study, indoor air, house dust, and biomonitoring in Germany

Polybrominated diphenyl ethers (PBDE) are used as flame retardants in a wide variety of products. As part of the Integrated Exposure Assessment Survey (INES), this study aimed to characterize the exposure of an adult German population using duplicate diet samples, which were collected daily over seven consecutive days, and indoor air and house dust measurements. Our study population consisted of 27 female and 23 male healthy subjects, aged 14–60 years, all of whom resided in 34 homes in southern Bavaria. In these 34 residences the air was sampled using glass fiber filters and polyurethane foams and the dust was collected from used vacuum cleaner bags.The median (95th percentile) daily dietary intake of six Tetra- to HeptaBDE congeners was 1.2 ng/kg b.w. (3.3 ng/kg b.w.) or 67.8 ng/day (208 ng/day) (calculated from the 7-day median values of each study subject). Concentrations in indoor air and dust (cumulative Tri- to DecaBDE congener readings) ranged from 8.2 to 477 pg/m³ (median: 37.8 pg/m³) and 36.6 to 1580 ng/g (median: 386 ng/g), respectively. For some congeners, we identified a significant correlation between air and dust levels.The median (95th percentile) blood concentration of total Tetra- to HexaBDE congener readings was 5.6 (13.2) ng/g lipid. No significant sex differences were observed, but higher blood concentrations were found in younger participants. Using a simplified toxicokinetic model to predict the body burden from exposure doses led to results that were of the same order of magnitude as the measured blood concentrations.Based on these measurements and given our exposure assumptions, we estimated for the total tetra- to heptabrominated congener count an average (high) comprehensive total daily intake of 1.2 ng/kg b.w. (2.5 ng/kg b.w.). Overall, our results suggest that dietary exposure is the dominant intake pathway at least in our study population, responsible for 97% (average intake) and 95% (high intake) of the total intake of an adult population.     

Concentrations and determinants of outdoor, indoor and personal nitrogen dioxide in pregnant women from two Spanish birth cohorts

Determinants of outdoor, indoor and personal concentrations of nitrogen dioxide (NO₂) were assessed in a subset of pregnant women of the Spanish INMA (Environment and Childhood) Study. Home indoor and outdoor NO₂ concentrations were measured during 48 h with passive samplers for 50 and 58 women from the INMA cohorts of Valencia and Sabadell, respectively. Women from Sabadell also carried personal NO₂ samplers during the same period. Data on time–activity patterns, socio-economic characteristics, and environmental exposures were obtained through questionnaires. Multiple linear regression models were developed to predict NO₂ levels.In Valencia, median outdoor NO₂ levels (42 µg/m³) were higher than median indoor levels (36 µg/m³). In Sabadell, personal NO₂ showed the highest median levels (40 µg/m³), followed by indoor (32 µg/m³) and outdoor (29 µg/m³) levels. Personal exposure to NO₂ correlated best with the indoor NO₂ levels. Temporal and traffic-related variables were significant predictors for outdoor NO₂ levels. Thirty-two percent of the indoor NO₂ variability in the two cohorts was explained by outdoor NO₂ levels and the use of the gas appliances. The model for personal exposure accounted for 59% of the variance in NO₂ levels in Sabadell with four predictor variables (outdoor and indoor NO₂ levels, time spent in outdoor environments and time exposed to a gas cooker). No significant association was found between personal or indoor NO₂ levels and exposure to environmental tobacco smoke (ETS) at home.Personal NO₂ levels were found to be strongly influenced by indoor NO₂ concentrations. The study supports the use of time–activity patterns along with indoor measurements to predict personal exposure to traffic-related air pollution.     

Assessing inhalatory and dermal exposures and their resultant health-risks for workers exposed to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists in a fastener manufacturing industry

This study first assessed workers' inhalatory and dermal exposures to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists. Then, their resultant lung cancer and skin cancer risks were estimated. Finally, control strategies were initiated from the health-risk management aspect. All threading workers in a fastener manufacturing plant were included. 16 inhalatory and 88 dermal PAH exposure samples were collected. Results show that the inhalatory gas phase total PAH exposure level (8.60x10(4) ng/m(3)) was much higher than that of particle phase (2.30x10(3) ng/m(3)). Workers' mean inhalatory exposure level (8.83x10(4) ng/m(3)) was lower, but its corresponding 1-sided upper 95% confidence level (UCL(1,95%)=1.02x10(5) ng/m(3)) was higher than the time-weighted average permissible exposure level (PEL-TWA) regulated in Taiwan for PAHs (1.00x10(5) ng/m(3)). The mean whole body total PAHs dermal exposure levels was 5.44x10(6) ng/day and the top five exposed surface areas were lower arm, hand, upper arm, neck, and head/front. The estimated lifetime skin cancer risk (9.72x10(-3)) was lower than that of lung cancer risk (1.64x10(-2)), but both were higher than the significant risk level (10(-3)) defined by the US Supreme Court in 1980. The installation of a local exhaust ventilation system at the threading machine should be considered as the first priority measurement because both lung and skin cancer risks can be reduced simultaneously. If the personal protection equipment would be adopted in the future, both respiratory protection equipment and protective clothing should be used simultaneously.     

Multicompartmental fate of persistent substances

Background, Aim and Scope Modelling of the fate of environmental chemicals can be done by relatively simple multi-media box models or using complex atmospheric transport models. It was the aim of this work to compare the results obtained for both types of models using a small set of non-ionic and non-polar or moderately polar organic chemicals, known to be distributed over long distances. Materials and Methods Predictions of multimedia exposure models of different types, namely three multimedia mass-balance box models (MBMs), two in the steady state and one in the non-steady state mode, and one non-steady state multicompartment chemistry-atmospheric transport model (MCTM), are compared for the first time. The models used are SimpleBox, Chemrange, the MPI-MBM and the MPI-MCTM. The target parameters addressed are compartmental distributions (i.e. mass fractions in the compartments), overall environmental residence time (i.e. overall persistence and eventually including other final sinks, such as loss to the deep sea) and a measure for the long-range transport potential. These are derived for atrazine, benz-[a]-pyrene, DDT, α and γ-hexachlorocyclohexane, methyl parathion and various modes of substance entry into the model world. Results and Discussion Compartmental distributions in steady state were compared. Steady state needed 2–10 years to be established in the MCTM. The highest fraction of the substances in air is predicted by the MCTM. Accordingly, the other models predict longer substance persistence in most cases. The results suggest that temperature affects the compartmental distribution more in the box models, while it is only one among many climate factors acting in the transport model. The representation of final sinks in the models, e.g. burial in the sediment, is key for model-based compartmental distribution and persistence predictions. There is a tendency of MBMs to overestimate substance sinks in air and to underestimate atmospheric transport velocity as a consequence of the neglection of the temporal and spatial variabilities of these parameters. Therefore, the long-range transport potential in air derived from MCTM simulations exceeds the one from Chemrange in most cases and least for substances which undergo slow degradation in air. Conclusions and Perspectives MBMs should be improved such as to ascertain that the significance of the atmosphere for the multicompartmental cycling is not systematically underestimated. Both types of models should be improved such as to cover degradation in air in the particle-bound state and transport via ocean currents. A detailed understanding of the deviations observed in this work and elsewhere should be gained and multimedia fate box models could then be ‘tuned in’ to match better the results of comprehensive multicompartmental transport models. ESS-Submission Editor: Prof. Dr. Michael Matthies (matthies@uos.de)     

Measurements of human exposure from emerging wireless technologies

The rapid development of wireless technologies leads to increased human exposure to electromagnetic fields from new devices. Most of these technologies communicate in short to medium range. Communication devices, such as mobile phones (GSM, UMTS, LTE) and wireless computer networks (WLAN, HSDPA, WIMAX) usually work at distances up to some 10 km. Other techniques like Bluetooth, RFID, and wireless USB work at distances up to a few meters. RFID systems can use several frequency bands from low frequencies up to microwaves. The other technologies are mainly using microwave frequencies. Most of these technologies have a rather low-output power, typically <1 W average power, except for fixed transmitters like base stations. This means that the exposure from distant sources is low. If the devices are kept close to the body, the local exposure can be in the range of the levels in the ICNIRP recommendation; this is the case, for example, for mobile phones and WLAN transmitters in laptops. For distant sources, there exist several measurement techniques such as spectrum analysers, measurement receivers, and broadband meters. For sources used close to the body, the local SAR levels have to be determined. For this purpose, instruments measuring the local electric field inside body phantoms have been developed. An alternative to measurements is numerical simulations. If one has knowledge of the signal characteristics of the different technologies then it is possible to find a suitable measurement technique to assess the human exposure.     

我国煤炭起尘特性

阐述了我国煤炭生产、加工、储运现状和发展趋势。对煤炭本身的起尘特性,包括全水分含量、内水分含量和外水分含量,煤炭的煤化程度与润湿性关系以及煤块和煤粉的饱和水分含量特性,分别进行了详细深入的试验研究。在此基础上,提出了主要问题及控制煤尘污染的对策     

Effect of vehicle and crash factors on older occupants

PROBLEM: The expected substantial increase in people aged 65 or older is important for those concerned about transportation injuries. However, much of the previous research concentrates on older drivers and overlooks the fact that vehicle and crash factors may provide significant explanations of older occupant injury rates. METHOD: Differences across age groups are explored using two nationwide travel surveys, crash involvement, fatalities, and injuries from crash databases and an ordered probit model of injury severity. RESULTS AND DISCUSSION: Two noticeable differences that help explain injury risk are that older people are more likely to travel in passenger cars than younger people who frequently use light trucks, and that seriously injured older occupants are more likely to be involved in side-impact crashes than their younger counterparts. IMPACT: Increased attention to vehicle engagement in side-impact crashes and to vehicle technologies that can help drivers avoid side collisions would be particularly helpful for older occupants.     

Ozone distribution in central Italy and its effect on crop productivity

The focus of the present study was to assess the ozone levels in a typical area of the Mediterranean basin, viz. Tuscany (central Italy). Eighty-thousand hourly mean ozone concentrations were recorded by 10 automatic analysers in the districts of Florence, Pisa, Lucca and Prato, from May to September 1995 to 1997. The highest daily mean concentrations were reached in Florence, with a maximum hourly average of 197 ppb. In Lucca and Pisa, the peaks were close to 100 ppb. Data from Prato were much lower. Long-term critical levels for vegetation, as set by United Nations Economic Commission for Europe (UNECE), were constantly exceeded in Florence and Pisa, occasionally in Lucca, never in Prato. The results were used to fit exposure/yield response relationships proposed by UNECE and US National Crop Loss Assessment Network for some important crops. The estimated yield losses varied in Florence from 8% for corn and alfalfa to 27% for soybean, in Pisa from 5% for corn to 24% for soybean, in Lucca from 3% for corn to 17% for soybean. A preliminary economic estimate for corn, wheat, barley, soybean, tomato and alfalfa, calculated annual damage to be 4.6 M Euro in Florence, 0.5 M Euro in Lucca and 3 M Euro in Pisa. The picture must be regarded as only partial, as exposure/yield response relationships for important Italian crops (such as grapevine and vegetables) are not available.