涡轮叶片NiCoCrAlYTa涂层抗高温氧化和腐蚀性能测试研究

目的保障涡轮叶片的安全可靠应用,研究NiCoCrAlYTa涂层的高温氧化和燃气热腐蚀行为。方法针对有无涂层的涡轮叶片试样,分别进行1050℃/100 h的抗氧化试验和950℃/100 h的燃气热腐蚀试验,同时分析试验后合金基体和涂层的微观形貌。结果抗氧化试验后,无涂层试样的平均氧化皮脱落量和平均氧化速率分别是带涂层试样的10倍和3倍左右,无涂层试样叶身表面可见大量氧化皮脱落形成的凹坑,带涂层试样的涂层完好,基体未见氧化特征。燃气热腐蚀试验后,无涂层试样的腐蚀速率是带涂层试样的3倍,无涂层试样叶身表面可见较多腐蚀坑,有涂层试样的涂层未被明显腐蚀。结论 NiCoCrAlYTa涂层在经过长时间高温氧化和腐蚀后仍能形成完整的Al_2O_3膜,从而起到较好的保护作用。Ta、Y等元素对Al_2O_3氧化膜的形成及质量具有促进作用。     

磁溅射法制备TiO2/PTFE复合膜及其性能研究

目的研究磁控溅射法在聚四氟乙烯(PTFE)微孔膜上负载TiO_2,制备TiO_2/PTFE复合膜。方法利用接触角、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、拉伸强度等对复合膜亲水性、元素、形貌和机械强度进行测试,通过控制变量法研究了溅射时间、溅射功率对膜性能的影响及对复合膜对甲基橙的降解性能。结果在溅射功率为40 W,溅射时间为90 s时,TiO_2/PTFE复合膜的亲水性和拉伸强度相对较好,甲基橙的去除率达97%,降解效果好。结论通过实验可以优化出磁控溅射的工艺参数,制备出物理性能优异,并具有较高的光催化活性的负载型纳米催化剂。     

近距离上保护层开采最小安全岩柱厚度研究

运用岩石力学知识和数值模拟方法,分析近距离保护层矩形掘进巷道周边的应力分布规律以及巷道塑性区范围的确定方法,并结合平煤集团五矿的保护层开采条件,利用FLAC数值计算程序对该矿近距离上保护层掘进期间不同岩柱厚度条件下的保护层底板塑性破坏范围进行数值模拟,在此基础上,提出合理确定保护层底板安全岩柱厚度的方法,现场观测结果表明,理论计算与数值模拟结果比较吻合,符合生产实际。     

钢线拉丝及表面处理生产线成套装备

主要论述了一种钢线拉丝及表面处理生产线成套装备的设计。该生产线的生产方式是多根钢线在牵引动力系统的作用下依次穿过各种处理设备,完成各道工序,实现钢线完成表面处理的目的。这个生产过程中,钢线可以完成放线、脱脂、退火、镀镍、造膜、烘干及收线一体化的工序。采用立体式布置,空间利用更为合理。     

施肥与地膜覆盖对土壤有机质平衡的影响

用田间长期定位试验法研究了施肥与地膜覆盖条件下玉米连作在壤质棕壤中有机质的矿化、积累和平衡。结果表明，土壤有机质矿化率在０．０１０７～０．０４３８／ａ之间，施肥与地膜覆盖有利于土壤有机质的积累与平衡，并加快有机质矿化；在本试验各施肥处理中土壤有机质均有所积累；在连年稳定施肥条件下，有机肥的施用会明显提高土壤有机质平衡值     

冷凝膜油气回收技术在轻质油汽车装车中的应用

介绍了油气回收技术的基本原理,着重介绍了冷凝膜回收工艺技术的特点,及冷凝膜回收装置在中国石化青岛石油化工有限责任公司轻质油汽车装车的应用情况,分析了存在的问题及改进建议。     

上海市一次性塑料饭盒的管理现状分析及建议

梳理了上海市在一次性塑料饭盒管理工作中回收处置系统难以正常运转的主要问题，提出了建立全国一盘棋的格局，将其他塑料废弃物纳入回收处置的管理范畴，并建立对废塑料回收处置的奖励或补贴政策，从而继续控制视觉污染，促进生活垃圾减量化和资源化。     

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m³ and cold gas efficiencies up to 60%.     

Degradation of Carbofuran in Water by Solar Photocatalysis in Presence of Photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 × 10^?6 M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

丁烷与空气混合物的爆炸性能测定

在不同条件下,对丁烷与空气混合物进行爆炸实验,由微机数采测试系统测定其爆炸参数（爆轰波压力、爆轰波传播速度等）、爆轰极限以及当其形成爆轰时所需的临界起爆能。通过实验测定,为评价丁烷与空气混合物的安全性能提供重要依据