染料工业废水零排放的可行性研究

染料废水是目前难治理的工业废水之一.通过对某染料厂还原蓝生产废水的研究,提出了利用残余硫酸制取硫酸亚铁水处理剂,滤渣在一般锅炉内焚烧的综合利用和治理工艺.从而探索和实践了少污染,回收利用等综合治理污染的工艺,力求尝试一种"零排放"和"绿色化学"的化工生产过程.     

垃圾焚烧发电的应用前景分析及应对措施

介绍了城市生活垃圾的危害和处置方式，通过对各种处置方式存在问题的比较，得出垃圾焚烧发电前景广阔，符合垃圾利用减量化、资源化、无害化的利用原则。同时对垃圾焚烧发电的应用提出了一些应对措施。     

双喷嘴矩形喷动床流体力学及脱硫性能的实验研究

针对半干法烟气脱硫方法,提出了一种新型的双喷嘴矩形喷动床半干法脱硫技术.在相同的静床层高度下,研究了最小喷动速度、最大喷动压降和喷动高度;在相同的Ca/S比、进气SO2浓度、进口温度、绝热饱和温差条件下,以消石灰为脱硫剂,研究了脱硫性能,并与传统柱锥形喷动床进行了比较.结果表明,矩形喷动床拥有更好的流动性能和脱硫率,得出了实验条件下矩形喷动床的最佳操作范围.     

城市下水污泥焚烧过程中二次污染物排放特性的试验研究

在0．15MWt循环流化床燃烧试验台上进行了城市下水污泥与煤的混烧试验，分析了烟气中的二次污染物排放特性。分析结果表明，利用循环流化床焚烧城市下水污泥时，添加辅助燃料（如煤）及改变焚烧条件，不仅可以达到稳定燃烧的目的，而且有利于抑制焚烧中二次污染物（如CO及二恶英等有机污染物）的生成。分析了焚烧污泥污染物的排放特性。为采用焚烧方式处理城市下水污泥提供了基础性试验数据。     

SBR式流化床船用生活污水处理设备及其处理效果

介绍了SBR式流化床船用生活污水处理设备的组成结构，对该设备进行了启动试验和污水处理效果试验，结果表明该设备具有启动方便、反应时间短的特点。当处理周期为2h时，处理设备的出水水质完全满足《船用生活污水处理系统技术条件》（GB10833-89）的要求。     

Control of mercury vapor emissions from combustion flue gas

GOAL, SCOPE AND BACKGROUND: Mercury (Hg) emission from combustion flue gas is a significant environmental concern due to its toxicity and high volatility. A number of the research efforts have been carried out in the past decade exploiting mercury emission, monitoring and control from combustion flue gases. Most recently, increasing activities are focused on evaluating the behavior of mercury in coal combustion systems and developing novel Hg control technologies. This is partly due to the new regulatory requirement on mercury emissions from coal-fired combustors to be enacted under the U.S. Title III of the 1990 Clean Air Act Amendments. The aim of this review work is to better understand the state-of-the-art technologies of flue gas mercury control and identify the gaps of knowledge hence areas for further opportunities in research and development. MAIN FEATURES: This paper examines mercury behaviors in combustion systems through a comprehensive review of the available literature. About 70 published papers and reports were cited and studied. RESULTS AND DISCUSSION: This paper summarizes the mechanisms of formation of mercury containing compounds during combustion, its speciation and reaction in flue gas, as well as subsequent mobilization in the environment. It also provides a review of the current techniques designed for real-time, continuous emission monitoring (CEM) for mercury. Most importantly, current flue gas mercury control technologies are reviewed while activated carbon adsorption, a technology that offers the greatest potential for the control of gas-phase mercury emissions, is highlighted. CONCLUSIONS AND RECOMMENDATIONS: Although much progress has been achieved in the last decade, techniques developed for the monitoring and control of mercury from combustion flue gases are not yet mature and gaps in knowledge exist for further advancement. More R&D efforts are required for the effective control of Hg emissions and the main focuses are identified.     

半干法烟气脱硫新技术——粉末-颗粒喷动床技术

粉末 颗粒喷动床 (powder particlespoutedbed ,PPSB)是近几年来由日本研究人员开发的一种新的半干法烟气脱硫技术。本文介绍了PPSB的基本原理、优点以及在试验条件下所得到的影响因素和适宜的运行方式。PPSB在系统结构、废物处理、操作和费用方面比湿法有所提高 ,同时又比干法和其他半干法的去除率和吸收剂的利用率高。此外 ,对吸收剂研究结果表明 ,石灰石的脱硫效率虽然不及石灰 ,但是由于PPSB中吸收剂的停留时间长 ,气、固、液三相接触好的特点以及可以对石灰石进行研磨 ,因此 ,利用石灰石作吸收剂的PPSB完全可以达到理想的脱硫效率 ,同时也可以保持较好的经济性。但是 ,目前还没有大规模的试验和应用。所以PPSB是一项十分值得进一步开发和应用的烟气脱硫新技术。     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%(质量百分比).反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

Organic compounds in the flue gas from a power station with circulating fluid bed combustion of coal

Numerous organic compounds have been analyzed by coupled gas chromatography-mass spectroscopy (GC-MS) in flue gas after fluid bed combustion of four coal species from South Africa, Poland, Spitsbergen and Ruhr area (Germany). Polynuclear aromatic hydrocarbons, aliphatic hydrocarbons, chlorinated, heterocyclic and nitro compounds as well as phthalate esters are detected.     

Development and prospects of municipal solid waste (MSW) incineration in China

With the lack of space for new landfills, municipal solid waste (MSW) incineration is playing an increasingly important role in municipal solid waste management in China. The literatures on certain aspects of incineration plants in China are reviewed in this paper, including the development and status of the application of MSW incineration technologies, the treatment of leachate from stored MSW, air pollution control technologies, and the status of the fly-ash control method. Energy policy and its promotion of MSW-to-energy conversion are also elucidated.