危险废物焚烧厂烟气净化工艺设计与探讨

参考国内外已有的危险废物焚烧工程相关设计和研究资料,针对国内具有代表性的危险废物成分,采用设计计算得到危险废物焚烧烟气的污染物初始浓度,分析成熟的烟气净化工艺,对适合中国危险废物特点的危险废物焚烧厂烟气净化工艺进行了设计和探讨,为危险废物焚烧厂建设单位及设计单位等提供参考。     

新型气流剪切错流旋转填料床的综合性能评判

针对旋转填料床除尘效率低和运行能耗高的问题,通过改变上旋转填料环填料（上填料）和下旋转填料环填料（下填料）的孔隙率,增加填料环直径形成填料床壁面外突实现设备优化,研究超重力因子和气速对气流剪切错流旋转填料床（GSC-RPB）和新型气流剪切错流旋转填料床（NGSC-RPB）的影响,并提出应用品质因子评判填料床综合性能的方法。实验结果表明:优化前后旋转填料床的除尘效率和气相压力随着气速和超重力因子的增加而增加;NGSC-RPB的除尘效率较GSC-RPB有显著提高,NGSC-RPB的气相压降则略有降低;在达到国家超低排放浓度标准即5 mg/m3的前提下,通过对品质因子的分析可知,NGSC-RPB的综合性能有所提高,在气速为1.3 m/s,超重力因子为90~120时NGSC-RPB的综合性能最优。     

生活垃圾焚烧二噁英排放对人群健康影响研究进展

综述了二噁英对人体健康的危害特性, 以及我国生活垃圾焚烧厂二噁英排放浓度水平,及其周边环境空气和土壤中二噁英污染浓度水平、人群暴露途径、剂量和健康影响。指出,现有研究显示,我国生活垃圾焚烧排放的二噁英浓度在合理范围之内,垃圾焚烧厂周边人群二噁英暴露量普遍低于世界卫生组织（WHO）推荐的容许标准,但也有研究发现,垃圾焚烧会导致周边环境介质中二噁英浓度水平增高。提出,应重点关注垃圾焚烧排放二噁英的长期低剂量暴露对人群健康的影响。     

Odor dispersion modeling with CALPUFF: Case study of a waste and residue treatment incineration and utilization plant in Kocaeli,Turkey

This study addresses the odor problem at a waste and residue treatment incineration and utilization plant located within the borders the Alikahya district of the Kocaeli province in Turkey. In the first stage of the study, odor measurements were made at designated sampling points, while in the second stage, odor concentrations were determined at the receptor points through dispersion modelling using a USEPA (United States Environmental Protection Agency) certified long-range (>50 km) CALPUFF lagrangian puff model. In the final stage, an analysis of the predicted and observed values was carried out using such statistical methods as geometric mean bias (MG), geometric variance (VG) and fractions of predictions within a factor of two observations (FAC2).

During the modelling study, the highest one-hour concentration level was found to be 1868.10 OU (Odor Units), and the 24-hour concentration level was found to be 1316 OU, representing a decrease of approximately 30 percent. According to the measurement made, the maximum concentration value was 2455 OU. Odor measurements were carried out at 13 points within the area in order to assess the prediction results. When the results were assessed using the MG, VG and FAC2 statistical methods, it was observed that an acceptable model performance was not achieved for the whole sampling point. When the reason for this was investigated, it was concluded that the observed values were lower than the predicted values due to the fact on the measurement days, the odor was dispersed by wind. It was further concluded that the observed values were higher than the predicted values as a result of odors emitted by other plants in the area. When the measurements in residential areas were examined to identify the effect of the odors, it was determined that although the primary density of settlement is to the southwest of the plant, it was not this area that was affected most, but rather the area to the northeast, where there is a lower settlement density.     

Recovery of copper from small grain size fractions of municipal solid waste incineration bottom ash by means of density separation

Small grain size fractions of municipal solid waste incineration (MSWI) bottom ash (BA) contain elemental and chemically bonded metals in appreciable amounts, especially copper. Investigations with a centrifugal concentrator were carried out using samples, which had been treated with different impact devices. Partly the impacts of single devices were visible in outlines, but mostly the surfaces of the metals were still covered with mineral residues. To generate copper rich fractions, parameters of the separation process should ensure mass yields <2%, best between 0.5 and 1%. The density of the concentrates is then generally >3.2 g/cm³. Best results were achieved with material from a special treatment train which is adapted to grain sizes <2 mm. Reliable copper contents between 20 and 40% (single runs >50%) could be realised. However, considering the required mass yields, referred to this subset only 150–170 g copper would be recovered from 1 Mg MSWI BA. Furthermore, this copper is only in parts present in elemental form. A dependable added value of such treatment step seems to be given only, if that enables a recycling of the mineral aggregates (tailings) in parallel to avoid landfill costs.     

活性炭固定床吸附分离溶液中表面活性剂和多环芳烃

利用活性炭固定床吸附分离表面活性剂和多环芳烃(PAH)的混合溶液,选取了具代表性的表面活性剂(TX100)和PAH(菲(PHE)等)。实验结果表明,流量越低、活性炭填充量越多、表面活性剂浓度越高、PAH浓度越低,越有利于表面活性剂的回收和PAH的去除。定义了有效回收时间,该时间是指PAH穿透10%的时间与表面活性剂穿透90%的时间之差,该时间越长,越有利于表面活性剂的回收。采用BDST和Thomas模型对TX100和PHE进行了吸附模拟,效果均较好;BDST模型拟合结果表明,当活性炭对TX100的吸附接近饱和时仍对PHE有较强的吸附能力。活性炭固定床吸附分离法可节约运行成本0.06元/L。     

市政污泥干化焚烧工艺设计与思考

以南方经济发达地区100 tDS/d的污泥干化焚烧发电工程为例,介绍了污泥处置的热电联用系统.工程利用离心干化设备,以废蒸汽为热源干化污泥,提高热值,干化污泥与生物质在循环流化床锅炉中协同焚烧,焚烧产生的蒸汽通过汽轮发电机组发电自用.烟气经过多级处理后达标排放,废水、飞灰和炉渣都得到有效的处理与处置.该工程的实施缓解了...     

膨胀颗粒污泥床-接触氧化法处理棕榈油废水

采用膨胀颗粒污泥床（EGSB）-接触氧化工艺处理棕榈油废水。考察了该工艺对废水COD、固体悬浮物（SS）、有机氮等的去除效果,关键工艺参数,同时探讨了盐浓度对废水生物处理效果的影响。实验结果表明,该组合工艺COD去除率高于95％,BOD,和SS去除率均高于98％,油脂去除率高于90％,有机氮去除率82％,处理后的出水满足马来西亚回灌水国家标准。因出水中含大量的钾,将其用于农田灌溉时,不仅可减少肥料的用量,而且可减少对环境的污染。     

城市半封闭河道水体生态恢复试验

利用复合生态滤床、底泥生物氧化、水体生物修复和河道生态恢复等技术,对上海漕溪河富营养水体进行治理.结果表明,在每隔7～10 d间歇性流量300～400 m3/次的污水补水进量下,通过生物治理,消除了水体富营养和黑臭现象,从每个污水补给周期开始,3～4 d后COD、NH3-N、TP除去率分别达到50%、40%和55%以上,水体清澈见底.从2005年3～5月,河道生物多样性逐步增加,先后出现枝角类、桡足类动物和鱼类.表明对于已截污的城市半封闭河道,利用浸没式复合生态滤床对污水进行预处理,在此基础上,通过底泥生物氧化、水体增氧、河道生态恢复等措施,进行生物治理,可取得良好治理效果.本研究为城市半封闭河道的治理和养护提供了一套切实可行的方法.     

医疗垃圾热解焚烧实验研究

医疗垃圾是一种对环境危害极大的危险废弃物.用一种固定炉排炉热解焚烧系统,对广州市部分医院的医疗垃圾进行了热解焚烧及尾气净化试验,并对焚烧工况、烟气中主要的污染物含量及灰渣的灼减率进行分析.分析结果表明:稳定运行时炉膛平均温度在850℃左右,二燃室平均温度在1000℃以上;尾气中CO、NOx、HCl和SO2浓度分别为:71mg/m3、125 mg/m3、27.8 mg/m3和21 mg/m3,灰渣的灼减率为2.7%.均远远低于标准限值.