Selenium status in food grains of northern districts of India

The selenium status in the food grains of the agricultural lands of northern parts of India was estimated by using the HG-AAS technique. The areas where lesser rains were received or less irrigation water was available in northern Indian states viz. Rajasthan and southern parts of the Haryana had higher selenium levels in food grains. Punjab, Himachal Pradesh and northern parts of the Haryana states had normal levels of selenium in their food grains, except for slightly lower selenium levels in a few areas that were affected by floods along the river Yamuna.     

Usability of food industry waste oils as fuel for diesel engines

Two cogeneration units were each fitted with a prechamber (IDI) diesel engine in order to test the feasibility of using waste oils from the food industry as a fuel source, and additionally to test emissions generated by the combustion of these fuels. Esterified waste oils and animal fats as well as mustard oil were tested and compared to the more or less "common" fuels: diesel, rapeseed oil and rapeseed methyl ester. The results show that, in principle, each of these fuels is suitable for use in a prechamber diesel engine. Engine performance can be maintained at a constant level. Without catalytic conversion, the nitrogen oxides emissions were comparable. A significant reduction in NO(x) was achieved through the injection of urea. Combining a urea injection with the SCR catalytic converter reduced NO(x) emissions between 53% and 67%. The carbon monoxide emissions from waste oils are not significantly different from those of "common" fuels and can be reduced the same way as of hydrocarbon emissions, through utilization of a catalytic converter. The rate of carbon monoxide reduction by catalytic conversion was 84-86%. A lower hydrocarbon concentration was associated with fuels of agricultural origin. With the catalytic converter a reduction of 29-42% achieved. Each prechamber diesel engine exhibited its own characteristic exhaust, which was independent of fuel type. The selective catalytic reduction of the exhaust emissions can be realized without restriction using fuels of agricultural origin.     

Biomagnification profiles of tributyltin (TBT) and triphenyltin (TPT) in Japanese coastal food webs elucidated by stable nitrogen isotope ratios

The measurement of organotins in the various biotas of coastal food webs with stable nitrogen isotope ratios (δ¹⁵N), which increase 3.4‰ per trophic level, can provide a biomagnification profile of organotins through food web. In this study, various biological samples were collected from three localities in Western Japan between 2002 and 2003 for analyses. Tributyltin (TBT) and triphenyltin (TPT) were still detected with a maximum of 99.5 and 8.7 ng wet weight g⁻¹, respectively. Unlike TBT, significant biomagnification of TPT through the food web (expressed by δ¹⁵N) was found in all three localities. The log transformed octanol–water partition coefficient (log K_ow) of TPT of 2.11–3.43 was overlapped by, but was slightly lower than, that of TBT of 3.70–4.70. Thus, this study demonstrates that although these chemicals have a log K_ow lower than 5, at least TPT undergoes significant biomagnification through the food web.     

Thermophilic adaptation of a mesophilic anaerobic sludge for food waste treatment

As opposed to mesophilic, thermophilic anaerobic digestion of food waste can increase the biogas output of reactors. To facilitate the transition of anaerobic digesters, this paper investigated the impact of adapting mesophilic sludge to thermophilic conditions. A 5L bench scale reactor was seeded with mesophilic granular sludge obtained from an up-flow anaerobic sludge blanket digester. After 13 days of operation at 35 degrees C, the reactor temperature was instantaneously increased to 55 degrees C and operated at this temperature until day 21. The biomass was then fed food waste on days 21, 42 and 63, each time with an F/M (Food/Microorganism) ratio increasing from 0.12 to 4.43 gVS/gVSS. Sludge samples were collected on days 0, 21, 42 and 63 to conduct substrate activity tests, and reactor biogas production was monitored during the full experimental period. The sludge collected on day 21 demonstrated that the abrupt temperature change had no pasteurization effect, but rather lead to a biomass with a fermentative activity of 3.58 g Glucose/gVSS/d and a methanogenic activity of 0.47 and 0.26 g Substrate/gVSS/d, related respectively, to acetoclastic and hydrogenophilic microorganisms. At 55 degrees C, an ultimate gas production (Go) and a biodegradation potential (Bo) of 0.2-1.4 L(STP)/gVS(fed) and of 0.1-0.84 L(STP) CH(4)/gVS(fed) were obtained, respectively. For the treatment of food waste, a fully adapted inoculum was developed by eliminating the initial time-consuming acclimatization stage from mesophilic to thermophilic conditions. The feeding stage was initiated within 20 days, but to increase the population of thermophilic methanogenic microorganisms, a substrate supply program must be carefully observed.     

Do wood mice (Apodemus sylvaticus L.) use food selection as a means to reduce heavy metal intake?

Food preference of wood mice from two with heavy metals polluted sites and two unpolluted sites was tested under laboratory and field conditions with two-way choice experiments. In the laboratory, wood mice preferred to eat acorns from unpolluted sites over acorns from polluted sites. Previous experience with polluted food had no influence on food choice. Preference was negatively related to acorn metal content. Furthermore, the nutrient content of the acorn endosperm was consistently lower in polluted sites. We therefore conclude that wood mice used absolute metal concentration in the acorn, nutrient content, or both as a food selection cue. The results of the laboratory experiment could not be confirmed under field conditions. We hypothesized that search time constraints due to the presence of predators, competitors and/or other stress factors in the field have prevented the mice to forage selectively.     

Human exposure to polybrominated diphenyl ethers (PBDE), as evidenced by data from a duplicate diet study, indoor air, house dust, and biomonitoring in Germany

Polybrominated diphenyl ethers (PBDE) are used as flame retardants in a wide variety of products. As part of the Integrated Exposure Assessment Survey (INES), this study aimed to characterize the exposure of an adult German population using duplicate diet samples, which were collected daily over seven consecutive days, and indoor air and house dust measurements. Our study population consisted of 27 female and 23 male healthy subjects, aged 14–60 years, all of whom resided in 34 homes in southern Bavaria. In these 34 residences the air was sampled using glass fiber filters and polyurethane foams and the dust was collected from used vacuum cleaner bags.The median (95th percentile) daily dietary intake of six Tetra- to HeptaBDE congeners was 1.2 ng/kg b.w. (3.3 ng/kg b.w.) or 67.8 ng/day (208 ng/day) (calculated from the 7-day median values of each study subject). Concentrations in indoor air and dust (cumulative Tri- to DecaBDE congener readings) ranged from 8.2 to 477 pg/m³ (median: 37.8 pg/m³) and 36.6 to 1580 ng/g (median: 386 ng/g), respectively. For some congeners, we identified a significant correlation between air and dust levels.The median (95th percentile) blood concentration of total Tetra- to HexaBDE congener readings was 5.6 (13.2) ng/g lipid. No significant sex differences were observed, but higher blood concentrations were found in younger participants. Using a simplified toxicokinetic model to predict the body burden from exposure doses led to results that were of the same order of magnitude as the measured blood concentrations.Based on these measurements and given our exposure assumptions, we estimated for the total tetra- to heptabrominated congener count an average (high) comprehensive total daily intake of 1.2 ng/kg b.w. (2.5 ng/kg b.w.). Overall, our results suggest that dietary exposure is the dominant intake pathway at least in our study population, responsible for 97% (average intake) and 95% (high intake) of the total intake of an adult population.     

Identification of Chinese cabbage genotypes with low cadmium accumulation for food safety

The pot-culture experiment and field studies were conducted to screen out and identify cadmium (Cd) excluders from 40 Chinese cabbage genotypes for food safety. The results of the pot-culture experiment indicated that the shoot Cd concentrations under three treatments (1.0, 2.5 and 5.0 mg Cd kg⁻¹ Soil) varied significantly (p < 0.05), with average values of 0.70, 3.07 and 5.83 mg kg⁻¹, respectively. The Cd concentrations in 12 cabbage genotypes were lower than 0.50 mg kg⁻¹. The enrichment factors (EFs) and translocation factors (TFs) in 8 cabbage genotypes were lower than 1.0. The field studies further identified Lvxing 70 as a Cd-excluder genotype (CEG), which is suitable to be planted in low Cd-contaminated soils (Cd concentration should be lower than 1.25 mg kg⁻¹) for food safety.     

Identification of two new cytochrome P450 genes and RNA interference to evaluate their roles in detoxification of commonly used insecticides in Locusta migratoria

Composite samples of Australian farmed Yellowtail Kingfish (Seriola lalandi) (YTKF) (n = 27), Mulloway (Argyrosomus hololepidotus) (n = 6) and manufactured feed (n = 5) were analysed to benchmark levels of a broad range of residues and contaminants of potential public health and trade significance. A subset of these samples [YTKF (n = 5), Mulloway (n = 2) and feed (n = 5)] was analysed for dioxins and polychlorinated biphenyls (PCBs). The mean concentration of dioxins in YTKF was 0.6 pg TEQ g⁻¹ (range 0.22-0.8) and in Mulloway was 0.16 pg TEQ g⁻¹ (range 0.16-0.16). The mean concentration of dioxins and dioxin-like PCBs in YTKF was 2.6 pg TEQ g⁻¹ (range 1.4-3.5), while Mulloway had a mean concentration of 0.67 pg TEQ g⁻¹ (range 0.57-0.76). The mean concentration of PCBs in YTKF was 21 μg kg⁻¹ (range 8.6-29) and in Mulloway was 5.4 μg kg⁻¹ (mean 4.7-6). The mean concentration of dioxin-like PCBs in YTKF was 2.1 pg TEQ g⁻¹ (range 1.2-2.8) and in Mulloway was 0.51 pg TEQ g⁻¹ (range 0.41-0.61). The mean mercury concentration in YTKF was 0.03 mg kg⁻¹ (range 0.02-0.05) and in Mulloway it was 0.02 mg kg⁻¹ (range 0.02-0.04). There were no detectable levels of any pesticide or antimicrobial compounds in any sample of YTKF or Mulloway. Attention is drawn to technical differences in port of entry testing programs such as sampling strategies, portion tested, laboratory methodology, residue definitions and reporting conventions that exporters’ products may be subject to. All residues and contaminants were either undetectable or present at very low levels when judged against Australian, Japanese and European Union regulatory standards (where set).     

餐厨垃圾厌氧消化工艺的影响与优化

从厌氧消化工艺选择、产甲烷性能优化和联合消化等3个方面,概述了近年来国内外餐厨垃圾厌氧消化产甲烷工艺的研究进展,比较了国内外的研究差异,提出我国餐厨垃圾厌氧消化处理产甲烷性能优化及工业化应用的研究方向。     

Characterization of odorous charge and photochemical reactivity of VOC emissions from a full-scale food waste treatment plant in China

Food waste treatment plants (FWTPs) are usually associated with odorous nuisance and health risks, which are partially caused by volatile organic compound (VOC) emissions. This study investigated the VOC emissions from a selected full-scale FWTP in China. The feedstock used in this plant was mainly collected from local restaurants. For a year, the FWTP was closely monitored on specific days in each season. Four major indoor treatment units of the plant, including the storage room, sorting/crushing room, hydrothermal hydrolysis unit, and aerobic fermentation unit, were chosen as the monitoring locations. The highest mean concentration of total VOC emissions was observed in the aerobic fermentation unit at 21,748.2-31,283.3 μg/m³, followed by the hydrothermal hydrolysis unit at 10,798.1-23,144.4 μg/m³. The detected VOC families included biogenic compounds (oxygenated compounds, hydrocarbons, terpenes, and organosulfur compounds) and abiogenic compounds (aromatic hydrocarbons and halocarbons). Oxygenated compounds, particularly alcohols, were the most abundant compounds in all samples. With the use of odor index analysis and principal components analysis, the hydrothermal hydrolysis and aerobic fermentation units were clearly distinguished from the pre-treatment units, as characterized by their higher contributions to odorous nuisance. Methanthiol was the dominant odorant in the hydrothermal hydrolysis unit, whereas aldehyde was the dominant odorant in the aerobic fermentation unit. Terpenes, specifically limonene, had the highest level of propylene equivalent concentration during the monitoring periods. This concentration can contribute to the increase in the atmospheric reactivity and ozone formation potential in the surrounding air.