我国危险废物环境管理的法律法规和标准现状及建议

对我国危险废物管理现行法律、行政法规、部门规章和环境标准的状况进行了梳理,结果显示,法律中确立的一些危险废物管理制度尚未得到全面落实,管理过程中主要侧重无害化防治,而减量化和综合利用化的管理较为薄弱;危险废物管理的环境标准体系也还需进一步完善。建议修改、完善现行的行政法规、部门规章等,全面落实现有危险废物管理制度的实施,在危险废物管理中采取优先顺序策略,加强源头减量,促进资源化利用,在加强危险废物管理过程中的新技术和新方法研究的基础上尽快完善环境标准体系。     

Policy and Science Implications of the Framing and Qualities of Uncertainty in Risks: Toxic and Beneficial Fish from the Baltic Sea

Policy and research issues in the framing and qualities of uncertainties in risks are analyzed, based on the assessments of dioxin-like compounds (DLCs) and other ingredients in Baltic Sea fish, a high-profile case of governance. Risks are framed broadly, to then focus on dioxins and beneficial fatty acids, fish consumption, human health, and science-management links. Hierarchies of uncertainty (data, model, decision rule, and epistemic) and ambiguity (of values) are used to identify issues of scientific and policy contestation and opportunities for resolving them. The associated complexity of risks is illustrated by risk–benefit analyses of fish consumption and by evaluations of guideline values, highlighting value contents and policy factors in presumably scientific decision criteria, and arguments used in multi-dimensional risk and benefit comparisons. These comparisons pose challenges to narrow assessments centered, for e.g., on toxicants or on food benefits, and to more many-sided and balanced risk communication and management. It is shown that structured and contextualized treatment of uncertainties and ambiguities in a reflexive approach can inform balances between wide and narrow focus, detail and generality, and evidence and precaution.     

熔盐法处置高熔点垃圾焚烧飞灰重金属的浸出特性

对熔盐法处置高熔点垃圾焚烧飞灰重金属离子浸出特性进行了实验研究。结果表明,熔盐物料组成、熔盐温度和热处理气氛对重金属离子的热挥发特性具有重要影响。在还原性气氛条件下,热处理温度为900～1 000 ℃,添加质量分数为10%～50%的CaCl2的氯化钠熔盐中处理2 h后,垃圾焚烧飞灰渣中Pb、Cd、Cu和Zn等重金属浸出浓度降低90%以上,可以完全达到生活垃圾填埋场填埋标准。在此过程中,灰渣较原灰可减轻50%,同时转化成具有良好胶凝性能的水泥活性混合材料,XRD测试表明其晶体矿物组成为硅酸二钙、硅酸三钙和阿里尼特以及硫酸钙等。     

进料频率对餐厨垃圾与剩余污泥中温共发酵系统稳定性的影响

考察系统负荷(以COD计)为11.36 g·(L·d)-1时,6种不同进料频率下,餐厨垃圾和剩余污泥中温厌氧共发酵过程中产气量、气体组分、SCOD、pH和挥发性脂肪酸(VFAs)的变化,旨在明确进料频率对系统稳定性的影响,同时结合单一VFA的产甲烷动力学特性,探明系统不稳定的原因。结果表明,进料频率较高时,进料周期内系统的气体组分、SCOD和pH无明显变化,产气量呈线性增长,且基本无VFA积累。随着进料频率降低,进料初期过快的水解酸化导致SCOD和VFAs浓度呈现明显的先升高后逐渐降低的趋势,从而导致pH和甲烷含量波动明显。当进料频率为1 次·d-1时,系统中pH降至7.5,甲烷含量降至45.4%,丙酸占总有机酸的比例最高可达87.9%。相比乙酸而言,丙酸在甲烷化过程中存在的延滞期(1.21 h)及较低的甲烷化速率(5.01 mL·h-1)可能是导致存在丙酸积累的低频进料系统中稳定性较差的原因之一。     

微波预处理对剩余污泥生化处理的影响

采用微波对污泥进行预处理,考察处理功率和处理时间对污泥破解效果的影响;通过生化处理考察处理后污泥的降解效果。结果表明：适当提高微波处理功率,延长微波处理时间,可有效提高污泥破解效果,提高污泥中溶解性有机物含量。在最佳条件 500?W、10?min下,污泥破解率（ω）、溶解性总氮（TDN）和溶解性总磷（TDP）分别为31.0%、179.6?mg·L-1和31.3?mg·L-1。红外光谱分析表明,经微波处理后,污泥中的基团性质有所增强。预处理后污泥的日产甲烷量高于未处理污泥,累积产甲烷量提高了45.3%,表明污泥得到有效降解。经生化处理后,化学需氧量（COD）去除率达到98%以上,TDP去除率达到80%~85%,出水的TDN高于进泥。因此,对剩余污泥采用微波预处理进行生化处理的技术路线是可行的。     

城市生活垃圾热解重整制合成气计算分析

基于热化学平衡对热解重整制取合成气工艺进行了建模分析,考察了垃圾收到基水分Mar、干燥基灰分Ad、热解装置入口垃圾含水率和合成气燃烧比例对能量转化率、干合成气产率、干合成气低位热值、合成气组分等的影响。结果表明：该工艺对于收到基低位热值大于6.7?MJ·kg-1的生活垃圾可以产生标况下低位热值高于5.3?MJ·m-3的干合成气;垃圾收到基水分和干燥基灰分的增加会大幅降低能量转化率、干合成气产率和低位热值。     

Carry-over of dietary organochlorine pesticides, PCDD/Fs, PCBs, and brominated flame retardants to Atlantic salmon (Salmo salar L.) fillets

Information on carry-over of contaminants from feed to animal food products is essential for appropriate human risk assessment of feed contaminants. The carry-over of potentially hazardous persistent organic pollutants (POPs) from feed to fillet was assessed in consumption sized Atlantic salmon (Salmo salar). Relative carry-over (defined as the fraction of a certain dietary POP retained in the fillet) was assessed in a controlled feeding trial, which provided fillet retention of dietary organochlorine pesticides (OCPs), dioxins (PCDD/Fs), polychlorinated biphenyls (PCBs), and brominated flame retardants (BFRs). Highest retention was found for OCPs, BFRs and PCBs (31-58%), and the lowest retentions were observed for PCDD/Fs congeners (10-34%). National monitoring data on commercial fish feed and farmed Atlantic salmon on the Norwegian market were used to provide commercially relevant feed-to-fillet transfer factors (calculated as fillet POP level divided by feed POP level), which ranged from 0.4 to 0.5, which is a factor 5-10 times higher than reported for terrestrial meat products. For the OCP with one of the highest relative carry-over, toxaphene, uptake and elimination kinetics were established. Model simulations that are based on the uptake and elimination kinetics gave predicted levels that were in agreement with the measured values. Application of the model to the current EU upper limit for toxaphene in feed (50 μg kg⁻¹) gave maximum fillet levels of 22 μg kg⁻¹, which exceeds the estimated permissible level (21 μg kg⁻¹) for toxaphene in fish food samples in Norway.     

活性炭纤维(ACF)应用于有机废气回收和净化的进展

活性炭纤维(ACF)有比普通活性炭吸附量大、吸附和脱附速度快等优点,因此应用于有机废气的回收和净化,具有良好的经济、环境和社会效益。文中介绍了ACF的微观结构、表面化学以及吸附性能,并综述了近年来ACF在有机废气回收和治理方面的国内概况。     

采用Design-Expert分析多因素对电路板湿法拆解的影响与优化设计

废旧印刷电路板元器件拆解技术的研究是电子废弃物有效利用的重点环节。通过采用Design-Expert 8.0.6软件,对拆解过程中氟硼酸浓度,双氧水浓度和时间对铅、锡焊料的溶出率的影响趋势进行研究,得出最终优化实验方案为在双氧水浓度为0.5 mol·L-1、氟硼酸浓度为2.5 mol·L-1、反应时间为35 min的条件下铅、锡的溶出率分别为90.66%和99.91%,可视为铅、锡完全溶解并实现脱焊。该方法实现了电子元器件与印刷电路板的快速分离,将为电子废弃物的资源化提供理论支持和应用支撑。     

氧化亚铁硫杆菌浸出废弃挠性PCB中金属的影响因素分析

废弃挠性PCB是资源化价值高的电子废弃物之一,正需环境友好的方法回收其所含的多种有价金属。采用显微镜对破碎后的挠性PCB粉样进行解离情况观察,发现破碎法难以将挠性PCB中的金属与非金属解离。通过设计单因素实验,研究挠性PCB粉末粒度大小、添加量、培养液初始pH、菌接种量、活化时间以及FeSO4·7H2O添加量6个因素对氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,简称A.f菌）浸出挠性PCB中金属过程的影响。结果表明,A.f菌不能浸出挠性PCB中Au,但Cu、Ni可以有效浸出且最优化条件为：10 g·L-1挠性PCB、粒度0.25~0.42 mm、培养基初始pH 2.5、菌接种量5%、菌活化时间5 d、FeSO4·7H2O添加量30 g·L-1,金属Cu的浸出率达到90.1%,比未接种处理高出42.4%;金属Ni的浸出率达到了85.9%,比未接种处理高出了32.9%。因此,采用生物法可环境友好地回收挠性PCB中Cu、Ni,有利于废弃挠性PCB的资源化处理。