应用植物酯酶固化酶检测有机磷和氨基甲酸酯农药

选用聚苯乙烯微孔反应板作为酶的载体,将自制的植物酯酶固定在载体上的微孔内壁表面,制成农药快速检测板.采用酶抑制显色方法,检测有机磷和氨基甲酸酯类农药,其检测灵敏度在0 01～0 1mg·kg-1范围.该农药快速检测板为现场检测这两类农药提供了简便而快捷的方法.     

The role of lipids in fermentative propionate production from the co-fermentation of lipid and food waste

● Lipid can promote PA production on a target from food waste. ● PA productivity reached 6.23 g/(L∙d) from co-fermentation of lipid and food waste. ● Lipid promoted the hydrolysis and utilization of protein in food waste. ● Prevotella , Veillonella and norank _f _Propioni bacteriaceae were enriched. ● Main pathway of PA production was the succinate pathway. Food waste (FW) is a promising renewable low-cost biomass substrate for enhancing the economic feasibility of fermentative propionate production. Although lipids, a common component of food waste, can be used as a carbon source to enhance the production of volatile fatty acids (VFAs) during co-fermentation, few studies have evaluated the potential for directional propionate production from the co-fermentation of lipids and FW. In this study, co-fermentation experiments were conducted using different combinations of lipids and FW for VFA production. The contributions of lipids and FW to propionate production, hydrolysis of substrates, and microbial composition during co-fermentation were evaluated. The results revealed that lipids shifted the fermentation type of FW from butyric to propionic acid fermentation. Based on the estimated propionate production kinetic parameters, the maximum propionate productivity increased significantly with an increase in lipid content, reaching 6.23 g propionate/(L∙d) at a lipid content of 50%. Propionate-producing bacteria Prevotella, Veillonella, and norank_f_Propionibacteriaceae were enriched in the presence of lipids, and the succinate pathway was identified as a prominent fermentation route for propionate production. Moreover, the Kyoto Encyclopedia of Genes and Genomes functional annotation revealed that the expression of functional genes associated with amino acid metabolism was enhanced by the presence of lipids. Collectively, these findings will contribute to gaining a better understanding of targeted propionate production from FW.     

Economic simulation modeling of reprocessing alternatives for corn masa byproducts

Increasing production of corn masa for tortillas, chips, and related snack foods is resulting in large quantities of organic residuals requiring environmentally sound management. These byproduct streams appear suitable for use as livestock feed material, thus eliminating landfilling costs. Possibilities for developing livestock feed include direct shipping to livestock feeding facilities, blending prior to shipping, extrusion processing, pellet mill processing, and dehydration. To assess the viability of these options for reprocessing masa byproducts as livestock feed materials, an economic model was developed and applied to each of these alternatives. Through a series of simulation runs with this model, it was determined that direct shipping was by far the most inexpensive means of recycling masa processing residuals (10–57 $/Mg). Other alternatives examined in increasing order of costs included blending prior to shipping, extrusion, pellet mill processing (3–15, 5–18, and 4–18 times greater than direct shipping, respectively), while dehydration was clearly cost-prohibitive (33–81 times greater). Bagged feed was slightly more expensive to produce than bulk feed (1.1 times greater), and reprocessing costs increased as delivery distance increased, due to increased labor, equipment, and fuel costs, but decreased as byproduct generation rate increased, due to the development of the economies of scale. Alternately, based on a tipping fee of 50 $/Mg, the total estimated cost to landfill ranged from 65 to 112 $/Mg. Based on this cost analysis, direct shipping and feeding to livestock is the recycling option of choice for masa processing byproducts. Although specific details of process configurations and associated costs will vary, similar results are likely for other high moisture food processing residuals destined for utilization as livestock feed or components thereof.     

利用木薯渣进行纤维素分解菌混合发酵工艺研究

从自然界中筛选出6株相互间无拮抗作用的纤维素分解菌进行混合发酵,研究了该混菌以工业废弃物木薯渣为原料发酵的最佳产酶条件是:培养基配方为木薯渣4 g,黄豆粉0.75 g,KH2PO40.20 g,NaCl 0.02g,MgSO4·7H2O 0.015 g,蒸馏水1 000 mL;发酵工艺为初始pH=7.0,培养温度40℃,每250 mL锥形瓶装培养液140mL,接种量3%,在140 r·min-1转速下发酵72 h.结果表明,混合菌的发酵可大幅度提高纤维素酶活力及对还原糖的耐受力.     

Bioavailability of bound residue derived from 14C-labeled chlorsulfuron in soil and its mechanism of phytotoxicity

The bioavailability of bound residue(BR) derived from ^14C-labeled chlorsulfuron in soil and effect of the main components of the BR on growth of rape( brassica napus) and rice( Oryza sativa L. ) were investigated. The results showed that the BR with the concentration of 0.28 and 0.56 nmol/g air-dried soil, which was calculated by special radioactivity of ^14C-labeled chlorsulfuron parent compound, resulted in significant depression effect on growth of rape seedling. It was assured that the main components(2-amino-4-methoxyl-6-methyl-1,3,5-triazine, 2-amino-4-hydroxyl-6-methyl-1,3,5-triazine, and 2-chloro-benzenesul-fonamide) of the BR did not inhibit the growth of rape and rice. LC-MS analysis demonstrated that the parent compound previously bound to the soil matrix could be again released and transformed into methanol-extractable residue during the course of rape growth. It was concluded that the molecular leading to the phytotoxicity to rape and rice in the BR is still the parent compound.     

2014年河北中南部两次重霾天气成因分析

利用河北省环保局环境监测站提供的污染物浓度数据及常规气象观测数据、NCEP再分析资料,结合HYSPLIT4.9后向轨迹模式,对2014年10月上旬发生在河北省的2次大范围的重霾天气特征和成因进行综合分析.结果表明,这2次重污染天气过程PM_2.5地面浓度最大值出现在邢台,为507μg/m³,水平能见度不足1km.均压场的分布和较为平稳的高空形势为2次霾天气提供了有利的气象背景.高湿,静小风以及较低的混合层高度不利于污染物扩散,是导致这两次重污染天气持续的主要原因.结合卫星火点及污染物来源分析表明,河北南部及周边省份的秸秆燃烧加重了第2次过程的污染,污染气团的输送对区域性重霾天气产生重要影响.     

通风速率对厌氧残余物沼渣堆肥的影响

以牛粪发酵残余物沼渣为原料,设置不同的通风速率进行堆肥,堆体的通风速率分别是0.2,0.5,0.8L/（min·kg OM）,分析堆肥20d过程中物理、化学和腐熟变化的特征,探讨不同通风速率对堆肥特性的影响.结果表明,通风速率为0.2,0.5L/（min·kg OM）的堆体维持高温阶段的时间为5d,而通风速率为0.8L/（min·kg OM）堆体维持高温阶段时间为4d;各堆体OM分解率分别是28.2%,32.9%,30.5%;通风速率对终产品pH值、电导率（EC）影响不大,pH值均能满足堆肥最优pH值,EC均未超过4mS/cm;通风速率为0.2L/（min·kg OM）的堆体终产品的NH₄⁺-N含量超过400mg/kg,各堆体终产品NO₃^--N的含量分别是2545,3146,2735mg/kg;各堆体终产品C/N分别是16.5,14.1,15.6;各堆体终产品GI值分别是92.2%,96.6%,82.7%.通风速率为0.5L/（min·kg OM）堆体E465/E665（E₄/E₆）最小,其腐殖化程度最高.综合分析,0.5L/（min·kg OM）是沼渣堆肥最为合适的通风速率.     

南京市蔬菜中滴滴涕和六六六的残留及摄食暴露分析

为研究有机氯农药在食物中的残留及人群的摄食暴露,在2015年5月采集了南京市居民普遍食用的10种蔬菜,利用气相色谱-质谱联用仪(GC-MS)进行检测。研究表明滴滴涕(DDTs)和六六六(HCHs)在蔬菜中均有检出,∑DDTs的残留量为1.78~5.29 ng·g~(-1),∑HCHs的残留量为0.21~4.77 ng·g~(-1),其中∑10OCPs(有机氯农药)含量最高的蔬菜是藕(10.07 ng·g~(-1)),含量最低的是青菜(2.32 ng·g~(-1))。通过来源分析发现,蔬菜中DDTs可能有新的输入,而HCHs则主要源于历史残留。通过对不同人群的每日摄取量(EDI)进行摄食暴露分析发现,儿童的摄食暴露量要高于同性别其他年龄段人群,在儿童和未成年阶段,男性的暴露量普遍高于女性,而在成年和老年阶段,男性的暴露量低于女性。平均而言,各年龄段人群对γ-HCH和DDTs的日均口摄暴露量(EDI)值远低于联合国粮农组织和世界卫生组织(FAO/WHO)所规定的ADI值,表明在目前蔬菜消费量下,南京市居民通过摄入蔬菜引起的健康风险水平较低。     

秸秆焚烧影响南京空气质量的成因探讨

综合利用卫星遥感的火点和云覆盖信息,结合气团后向轨迹分析,探讨了由秸秆焚烧造成的空气污染物的区域尺度输送和本地源对城市空气质量的影响.结果表明,在一定气象条件下,污染物可以发生区域尺度的输送,上风火点与下风城市的污染有明显的相关,将空气污染分为局地型(如,2006年5月31日、2009年11月8日)、区域型(如,2008年10月28日),以及局地区域相结合型(如,2006年6月14日、2007年6月5日、2008年6月2日)3种.应用本文的方法,在有云时,可以通过部分火点和气团后向轨迹分析推测污染物源地.空气污染气象条件分析表明,秸秆焚烧若伴随高空(500hPa)有槽(或位于槽前),低空存在弱切变,气流由周边向中心辐合;同时,若在均压场控制下,等压线稀疏,风速较小或静风,污染物则易积聚而不易输送;逆温层的形成将污染物禁锢在混合层以下,不利于垂直扩散;再加上较大的相对湿度,有利于霾的形成,造成严重空气污染.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.