REDD+ benefit sharing under models tested by pilot projects in Tanzania: Inputs towards developing national benefit-sharing mechanism models

This paper presents results of the assessment on benefit sharing and payment mechanisms tested by six non-governmental organizations (NGOs)-piloted Reducing Emissions from Deforestation and Forest Degradation (REDD+) initiatives in Tanzania. Results from the assessment indicate that models applied by most of the REDD+ pilot projects have provided most of decisions for the distribution of benefits to the communities through village general assemblies. Based on requirements of the tested models, national benefit-sharing mechanism models are proposed. Major attributes to be considered in the development of national benefit-sharing models should include: (i) ensuring that the existing government structure is not excluded to ensure sustainability; (ii) village general assembly is involved in determining the distribution of the benefits accrued; and (iii) transparency in handling the carbon finance is ensured. Models that are proposed for the national REDD+ benefit sharing apply to two forest management systems, namely Joint Forest Management (JFM) and Community Based Forest Management (CBFM). The paper recommends testing of the two proposed models to determine whether they could be useful in sharing benefits resulting from REDD+ in Tanzania.     

“十二五”畜禽养殖污染减排问题及防治对策

对中国"十二五"前3年畜禽养殖业污染减排实践中存在的问题和面临的困境进行了分析和梳理,针对问题依据各地养殖现状核算了各区域耕地粪污承载负荷。据此提出种养结合是区域适宜的粪污治理思路,为地方政府与环境主管部门推进畜禽养殖污染防治和粪污资源化利用提出了建议。     

微波辐射对生物质热解过程的影响

自行设计加工了微波热重实验装置,研究了在微波辐射下菜籽粕热解过程特征及其产物产出规律.在此基础上,对比分析了菜籽粕微波热解与电热热解产物产出率之间的差异.结果发现,在菜籽粕微波热解过程中,半纤维素的反应区间为180 ～ 370℃,其转化率可以达到87.0％;纤维素的热解反应区间为370 ～ 550℃,其热解转化率32.8％.表明在微波作用下,纤维素的热稳定性远高于半纤维素.在菜籽粕的微波热解过程中,冷凝液的产生主要集中在100 ～400℃的温度范围内,热解得到的生物质油类主要是菜籽粕的半纤维素热解生成的.不凝气的产生主要集中在300 ～ 600℃的温度范围内,并且主要为纤维素与木质素的热解反应产生的.与电热方式相比,菜籽粕的微波热解升温速率较快,菜籽粕微波热解生物质炭的产出率较高,冷凝液产出率相对较低.     

中型污水处理厂中药物和个人护理品的分布与去除

为了解15种药物及个人护理用品(PPCPs)在中小型污水处理厂中的分布及其去除效果,采用液相色谱-串联质谱(LC-MS/MS)技术对3座A2/O工艺的污水处理厂水样进行分析研究。结果显示,除普萘洛尔、吉非罗平和吲哚美辛在3座中小型污水处理厂各个工艺单元中均未被检出外,其余12种目标化合物的检出频率在90%~100%之间。进水水样中PPCPs的平均检出浓度为2 285.4 ng/L,其中咖啡因(CF)的平均检出浓度最高为973.3 ng/L,酮洛芬(KP)的平均检出浓度次之为844.7 ng/L,两者之和占进水水样中PPCPs平均含量的79.5%,表明污水处理厂的主要污染物为CF和KP。3座污水处理厂对CF的去除效果最为显著,平均去除率为95.3%,对15种PPCPs总去除效率在39.3%~82.8%之间。     

盐效萃取法从电子产品清洗废液中回收异丙醇

用盐效萃取法从电子产品清洗废液中回收片丙醇,考察了碳酸钾水溶液与该清洗废液的质量比对脱水率的影响,测定了异丙醇-水-碳酸钾体系存40℃时的液液相平衡数据,用Pitzer理论和NRTL方程对液液相平衡数据进行了理论计算。结果表明：当质量分数为60．00％的碳酸钾水溶液与该废液的质晕比为2．00时,脱水率高达90．00％;将有机相进行精馏可得到质量分数为99．50％的异丙醇;计算值与实测值接近,水相和有机相的绝对平均偏差分别为0．62％和0．46％。     

采用两段SBR工艺处理石化废水

采用两段序批式活性污泥反应器（SBR）工艺处理高浓度石化废水,考察了DO、MLSS、反应温度对废水处理效果的影响。实验结果表明,两段SBR系统中有机物降解存在着不同的作用机理,第一段主要以去除易降解有机物为主,第二段主要以去除难降解有机物为主。在进水COD为4000mg／L、SBR1中DO为4～5mg／L、MLSS为5000mg／L,SBR2中DO为2～4mg／L、MLSS为3000mg／L、反应温度约为20℃的条件下,废水COD去除率达90％以上。     

基于IWCPA模型的工业节水关键技术选择

通过建立工业节水潜力分析和技术综合评价模型(IWCPA模型),筛选了影响高耗水行业用水的关键技术.选定2002年为基准年,在2010年和2020年高耗水行业取水零增长的情景设定下,进行了分行业和行业耦合的技术综合评价及技术选择,确定了重要工业用水技术实施的优先序,建立了高耗水行业重要用水技术的优选清单.结果表明,未来15a内是否能够在若干工业用水关键技术的研究、应用和推广方面取得突破,是挖掘工业节水潜力、提高工业用水效率的关键.     

湖北省环保产业SWOT分析

湖北省环保产业的现状一直无准确定量描述,2005年组织了对2004年湖北省环保产业优势、劣势等状况进行了首次全面调查,在此基础上,对湖北省环保产业进行了全面详细的SWOT分析,为湖北省环保产业可持续发展决策提供了科学的依据。     

煤气负压管道裂纹的修补

介绍了河南天宏焦化公司采用可赛新金属修补系列产品,对煤气负压管道裂纹进行修补,取得了良好效果,避免了煤气负压管道普通焊补作业的危险性和停机检修对生产造成的诸多不利因素,实现了煤气负压管道补漏作业的安全高效.同时,对可赛新金属修补系列产品的技术性能作了介绍.     

Decommissioning of offshore oil and gas facilities: a comparative assessment of different scenarios

A material and energy flow analysis, with corresponding financial flows, was carried out for different decommissioning scenarios for the different elements of an offshore oil and gas structure. A comparative assessment was made of the non-financial (especially environmental) outcomes of the different scenarios, with the reference scenario being to leave all structures in situ, while other scenarios envisaged leaving them on the seabed or removing them to shore for recycling and disposal. The costs of each scenario, when compared with the reference scenario, give an implicit valuation of the non-financial outcomes (e.g. environmental improvements), should that scenario be adopted by society. The paper concludes that it is not clear that the removal of the topsides and jackets of large steel structures to shore, as currently required by regulations, is environmentally justified; that concrete structures should certainly be left in place; and that leaving footings, cuttings and pipelines in place, with subsequent monitoring, would also be justified unless very large values were placed by society on a clear seabed and trawling access.