北京地区PM10与秸秆燃烧排放单颗粒对比分析

采用场发射带能谱扫描电镜(FESEM/EDS)法分析北京怀柔地区PM10与秸秆燃烧排放颗粒的形貌特征和成分差异.结果显示:秸秆燃烧后排放颗粒物多为大粒径颗粒,成分上都含S、Cl和K元素.含有生物质燃烧标志元素K的PM10颗粒物多为含Si、Al和Na元素的燃煤飞灰和矿物颗粒,与秸秆燃烧排放颗粒组成化学元素差异明显.据此推...     

Assessment of population exposure to particulate matter pollution in Chongqing, China

To determine the population exposure to PM(10) in Chongqing, China, we developed an indirect model by combining information on the time activity patterns of various demographic subgroups with estimates of the PM(10) concentrations in different microenvironments (MEs). The spatial and temporal variations of the exposure to PM(10) were illustrated in a geographical information system (GIS). The population weighted exposure (PWE) for the entire population was 229, 155 and 211 microg/m(3), respectively, in winter, summer and as the annual average. Indoor PM(10) level at home was the largest contributor to the PWE, especially for the rural areas where high pollution levels were found due to solid fuels burning. Elder people had higher PM(10) exposure than adults and youth, due to more time spent in indoor MEs. The highest health risk due to particulate was found in the city zone and northeast regions, suggesting that pollution abatement should be prioritized in these areas.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

湿法脱硫系统对烟气中可吸入颗粒物特性影响的实验研究

采用荷电低压颗粒冲击器对4套湿法烟气脱硫(WFGD)系统进出口颗粒物进行在线检测和采样分析,获得烟气中PM10、PM2.5质量浓度以及粒径分布特征,并通过场发射扫描电镜(FESEM)和元素能谱对飞灰颗粒的形貌特征和主要元素含量进行分析。实验结果表明,由于脱硫塔喷淋浆液的洗涤作用,WFGD系统对飞灰颗粒有一定的脱除效果,但喷淋浆液产生的小液滴以及石灰石/石膏颗粒被携带进入烟气,导致WFGD系统对烟气中颗粒物质量浓度及粒径分布影响较大。WFGD系统对飞灰颗粒组成成分也有一定影响,以WFGD系统B为例,出口飞灰颗粒中Ca和S的质量分数从进口的1.60%、2.81%上升到出口的6.12%、10.92%。FESEM观察结果表明,脱硫后小颗粒在脱硫浆液的促进作用下团聚凝并,形成大颗粒,呈现致密的不规则块状、层状或絮状结构。     

负载型颗粒活性炭催化过硫酸钠氧化降解橙黄G

通过在颗粒活性炭(GAC)上负载氧化铁,并以此作为催化剂(Fe/GAC)在常温常压下催化过硫酸钠(PS)产生硫酸根自由基降解偶氮染料橙黄G.研究了体系pH、氧化剂浓度、催化剂浓度对橙黄G去除率的影响,并且对催化剂的重复使用性能进行了测试.结果表明,在Fe/GAC/PS体系中,[OG]0=0.2 mmol/L,[GAC] =1 g/L,[PS]0=2 mmol/L,降解2h后OG去除率为99％,且有较高的矿化率;随着氧化剂浓度和催化剂浓度的增加,OG的去除效率提高;催化剂有较好的重复使用性.利用扫描电镜(SEM)对催化剂进行了表征,可以看出在活性炭上成功负载氧化铁.利用化学分子探针竞争实验鉴定催化反应中的活性物种SO4-·和OH·.     

哈尔滨道路附近大气可吸入颗粒物浓度及其成份分析

采集了2005年8月具有代表性的道路附近空气中可吸入颗粒物(PM10),分析了PM10中的离子、重金属及碳成分含量。结果表明,哈尔滨市道路附近PM10离子组分中SO42-、NH4+、Ca2+浓度较高,其主要来源于交通尘污染;富集因子法表明元素Cr、Zn和Pb来源于人为污染;EC/TC大于0.36,主要来自于汽车尾气等一次污染源的排放。     

臭氧法对酸性嫩黄G溶液的脱色效率和残留物的分析

实验考察了臭氧对酸性嫩黄G色度脱除和其溶液pH值的变化情况,并对降解溶液中的残留物进行定量分析。结果发现,20min时,脱色率达到97.5%;有酸性物质生成并使得溶液的pH值随反应时间的推移下降,pH与脱色率总体变化趋势一致。经反应,分子中的—SO3Na基团大部分生成了SO42-;N并没有氧化成NO2-、NO3-,而是生成其它含N化合物。     

Evaluation of the temporal variations of air quality in Taipei City, Taiwan, from 1994 to 2003

Data collected from the five air-quality monitoring stations established by the Taiwan Environmental Protection Administration in Taipei City from 1994 to 2003 are analyzed to assess the temporal variations of air quality. Principal component analysis (PCA) is adopted to convert the original measuring pollutants into fewer independent components through linear combinations while still retaining the majority of the variance of the original data set. Two principal components (PCs) are retained together explaining 82.73% of the total variance. PC1, which represents primary pollutants such as CO, NO(x), and SO(2), shows an obvious decrease over the last 10 years. PC2, which represents secondary pollutants such as ozone, displays a yearly increase over the time period when a reduction of primary pollutants is obvious. In order to track down the control measures put forth by the authorities, 47 days of high PM(10) concentrations caused by transboundary transport have been eliminated in analyzing the long-term trend of PM(10) in Taipei City. The temporal variations over the past 10 years show that the moderate peak in O(3) demonstrates a significant upward trend even when the local primary pollutants have been well under control. Monthly variations of PC scores demonstrate that primary pollution is significant from January to April, while ozone increases from April to August. The results of the yearly variations of PC scores show that PM(10) has gradually shifted from a strong correlation with PC1 during the early years to become more related to PC2 in recent years. This implies that after a reduction of primary pollutants, the proportion of secondary aerosols in PM(10) may increase. Thus, reducing the precursor concentrations of secondary aerosols will be an effective way to lower PM(10) concentrations.     

Economic assessment of the health effects related to particulate matter pollution in 111 Chinese cities by using economic burden of disease analysis

With China's rapid economic development, environmental problems have become more and more serious. Particulate air pollution is terrible in cities with large and dense population. It may lead to adverse health effects and economic costs. In this study, we calculated the health effects of pollution caused by particulate matter with aerodynamic diameters less than 10mum (PM(10)) in 111 Chinese cities in 2004 according to statistical data and epidemiological exposure-response functions. Using economic burden of disease analysis, an economic assessment of these health risks was also presented. In contrast to many previous studies that have examined individual cities, this study covered most large and medium-sized cities in China, which accounted for more than 70% gross domestic product (GDP) of China in 2004. The total economic cost caused by PM(10) pollution was estimated as approximately US$ 29,178.7 million. Mega cities such as Beijing, Shanghai, and Tianjin contribute relatively more to the total costs. The results will help policy makers in formulating more effective countermeasures and increasing public awareness to enhance environmental protection.     

冬、春季大气PM_(10)重污染的监测与预警——以江苏省典型城市为例

时2007年3月与2008年1月城市大气PM10重污染过程进行监测.结果表明,江苏省冬、春季城市PM10小时值总体呈正态分布,严重污染的发生与大气物理条件密切相关.PM<,10>重污染预报准确性仍有待改进,以完善省级大气环境监测预警体系.