生活垃圾焚烧飞灰固化体力学及重金属浸出特性

以苏州七子山生活垃圾焚烧厂产生的飞灰为研究对象,采用水泥作为固化剂,研究水泥飞灰固化体的应力应变特征及重金属浸出特性,并探讨了水泥飞灰配合比、养护时间等关键性因素对这些特性的影响。实验结果表明:较养护3 d的样品,其余养护时间的样品强度平均增长了约96.2%,而其破坏应变平均减小了56%。随着水泥含量和养护时间的增加,飞灰固化体的强度上升,而其破坏应变减小,该趋势主要归因于钙矾石(AFt)的形成促进了飞灰固化体强度的发展。较飞灰原样,飞灰固化体的重金属浸出浓度随着水泥含量、养护时间的增加而降低了38%~99%,重金属的迁移被限制,主要归因于水化硅酸钙(C—S—H)和钙矾石(AFt)的形成,以及飞灰和水泥水化反应创造的强碱性环境。     

Construction of vesicle CdSe nano-semiconductors photocatalysts with improved photocatalytic activity: Enhanced photo induced carriers separation efficiency and mechanism insight

Visible-light-driven photocatalysis as a green technology has attracted a lot of attention due to its potential applications in environmental remediation. Vesicle Cd Se nano-semiconductor photocatalyst are successfully prepared by a gas template method and characterized by a variety of methods. The vesicle Cd Se nano-semiconductors display enhanced photocatalytic performance for the degradation of tetracycline hydrochloride, the photodegradation rate of78.824% was achieved by vesicle Cd Se, which exhibited an increase of 31.779% compared to granular Cd Se. Such an exceptional photocatalytic capability can be attributed to the unique structure of the vesicle Cd Se nano-semiconductor with enhanced light absorption ability and excellent carrier transport capability. Meanwhile, the large surface area of the vesicle Cd Se nano-semiconductor can increase the contact probability between catalyst and target and provide more surface-active centers. The photocatalytic mechanisms are analyzed by active species quenching. It indicates that h+and UO_2~-are the main active species which play a major role in catalyzing environmental toxic pollutants. Simultaneously, the vesicle Cd Se nano-semiconductor had high efficiency and stability.     

鹤山灰霾期间大气单颗粒气溶胶特征的初步研究

2012年6月9-17日,使用单颗粒气溶胶质谱仪(SPAMS)分析了鹤山大气中单颗粒的特征,共采集到同时含有正负离子谱图的颗粒763350个,其粒径主要集中在0.2～2.0 μm之间,期间发生灰霾的天数为3d.研究结果表明,该地区的大气颗粒物类型主要可分为7种:元素碳(EC)、有机碳(OC)、元素-有机碳混合(ECOC)、大分子有机碳(HMOC)、海盐(Na-K)、富钾颗粒(K-rich)和富铅颗粒(Pb-rich).灰霾天气下,颗粒中的二次成分含量更高,粒径显著增大.各颗粒类型数量浓度均有一定程度的提高,其中,以EC、ECOC和K-rich的增加最为明显.分析结果表明,水稻秸秆的集中焚烧及EC、ECOC和K-rich的老化是形成本次灰霾的重要原因.     

烟气黑度的产生及处理方法

本文从原料、生产工艺、处理设备、企业管理等方面论述了烟气黑度超标的相关原因,针对具体情况提出了有针对性的解决方案,改进生产工艺、加强人员管理和设备投入等防治烟气黑度超标现象。     

新型改进旋混曝气器研究

目的研究新型改进旋混曝气器结构性能。方法向曝气池槽底放置旋混曝气器,充满水,投加还原剂（硫酸钠）和催化剂（硫酸钴）进行脱氧,待水中溶解氧质量浓度降为0后开始曝气,用溶氧仪进行数据记录,研究曝气器充氧效率,并进行对比。结果常温（20℃）同状态下通气8．5min后至饱和,通过记录测算出新型改进旋混曝气器蜀。值比常规旋混曝气器蜀。值大,充氧效率高。结论新型改进旋混曝气器的各项充氧性能提到了提高,在一定程度上提高了好氧生物处理效率,可降低污水厂的投资费用和运行成本。     

城市居住区毒气扩散数值模拟

针对某居住区附近氯气储罐连续泄漏,通过求解三维不可压缩Navier-Stokes方程、K-ε湍流模型和物质浓度方程,模拟毒气在建筑物扰动条件下的扩散过程以及浓度时空分布特征,以毒气负载为基础给出近地面毒气危害区域,探讨毒气扩散对周边居民的影响。     

气袋直接进样法测定丙烯腈

采用气袋直接进样法测定环境和污染源空气中的丙烯腈。结果表明:丙烯腈在0.4～99.5 mg/m3浓度范围内具有良好的线性关系,相关系数为0.999 8。在低、中、高3个添加水平回收率为88.9%~100%,相对标准偏差为0.6%~4.7%,均能较好地满足实验室分析要求。     

工业用煤气燃烧装置二氧化硫减排方式的讨论

工业用煤气是工业生产中普遍采用的气体燃料,煤气燃烧过程会产生二氧化硫,减少煤气燃烧过程的二氧化硫排放可采用煤气脱硫和烟气脱硫两种方式。本文通过对煤气脱硫工艺及烟气脱硫工艺原理及参数进行对比的方式,讨论工业用燃气燃烧装置的两种二氧化硫减排方式的优缺点,为该类装置脱硫设计提供参考。     

脉动频率对低浓度瓦斯脉动燃烧的影响研究

本文将低浓度瓦斯与脉动燃烧结合,主要研究了脉动频率对低浓度瓦斯燃烧的影响。实验结果发现：频率为99Hz至120Hz之间的脉动燃烧不仅可以降低贫燃极限．实现瓦斯在5％浓度下稳定而充分的燃烧,而且在相同温度下提高了瓦斯燃烧效率,污染物的排放也得到了改善。     

Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Mechanical mixing can be used for initial dispersion and distribution of nanoparticle agglomerates in metal matrix nanocomposite (MMNC) fabrication. As vortex height increases, flow is enhanced as well as the risk of oxidate melt contamination. The goal of this study was to examine and predict vortex height using dimensional analysis while varying fluid and the angular speed of a pitched square-blade impeller. An equation proposed by Markopoulos et al. was verified for the present experimental conditions. The relevant dimensionless numbers were the Reynolds (Re), Froude (Fr) and Galilei (Ga) numbers. A modified Fr was defined (Fr*) including the shaft and blade angles of the impeller. Experiments allowed calculation of the dimensionless numbers. Two fluids, water and 50 vol% aqueous glycerine, were used. Angular clockwise speed varied from 200 to 900 rpm in 100 rpm increments. Vortex height was measured in lateral view digital images. Correlations of the dimensionless numbers yielded, first, a linear relationship of the product of dimensionless vortex height (H) and specific gravity (ρ*) with respect to Fr*. A polynomial relationship was found between H and ReFr* for each fluid. The polynomial coefficients, in turn, follow a power law behavior with respect to Ga. This allows a prediction of vortex height in other Newtonian fluids that satisfy the single-phase isothermal flow condition. Perhaps, molten aluminum used in MMNC fabrication, can be analyzed based on a simple, room temperature, low cost transparent fluid system. For the experimental conditions in this study, the equation proposed by Markopoulos et al. was valid. The predicting methodology was verified with experimental results using 25 vol% aqueous glycerine, resulting in an absolute percent error of 5.29%, comparable and lower than an error of 9.12% obtained by predicting vortex height with Markopoulos’ equation.